EconPapers    
Economics at your fingertips  
 

International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME)

2011 - 2017

Current editor(s): J. Paulo Davim

From IGI Global
Series data maintained by Journal Editor ().

Access Statistics for this journal.
Track citations for all items by RSS feed
Is something missing from the series or not right? See the RePEc data check for the archive and series.


Volume 7, issue 2, 2017

The Impact of Firm Size in the Formulation of Sustainable Manufacturing Strategy Infrastructural Decisions Under Uncertainty pp. 1-18 Downloads
Lanndon Ocampo
Identification of Optimal Condition for Solid State Welding of Al/SiCp Composite using Taguchi Principles Integrated TOPSIS (TPIT) Method pp. 19-37 Downloads
Adalarasan Ramalingam and Santhanakumar Muthuvel
Dynamics of Deformable Fractal Surface in Contact with Harmonically Excited Rigid Flat pp. 38-62 Downloads
Tamonash Jana, Anirban Mitra and Prasanta Sahoo
Attenuation-Based Cable Design for High-Quality Manufacturing pp. 63-81 Downloads
Leonid Burstein and Asher Bohbot

Volume 7, issue 1, 2017

Mechanical Performance and Fracture Behavior of Recycled AA6061-T6 Alloy Melted from Aluminium Chips pp. 1-17 Downloads
Naveed Akhtar, Razzaq Ahmed, Muhammad Arfan and Muhammad Noshad Ali
Experimental Investigation On Cylinder Vibration Analysis, Combustion, Emission and Performance Of An IDI Engine pp. 18-36 Downloads
Prasada Rao Kancherla and Venkata Appa Rao Basava
Improvement of Tensile Behaviour of Tin Babbitt by Reinforcing with Nano Ilmenite and its Optimisation by using Response Surface Methodology pp. 37-51 Downloads
M. Vijaya Sekhar Babu, A. Rama Krishna and K.N.S. Suman
Performance of Solar Power Refrigerator Using Different Materials: A Comparison pp. 52-66 Downloads
P. Govinda Rao, V. Jagadeesh, K. Santa Rao and V. Chittibabu

Volume 6, issue 4, 2016

Dynamic Behaviour and Crack Detection of a Multi Cracked Rotating Shaft using Adaptive Neuro-Fuzzy-Inference System: Vibration Analysis of Multi Cracked Rotating Shaft pp. 1-10 Downloads
Rajeev Ranjan
Angular Torque Methodology for Cylinder Head Bolted Joint and Validation by FE and Experimental Work pp. 11-29 Downloads
Abhijeet Vithal Marathe, Neelkanth V. Marathe and G. Venkatachalam
An Investigation in Abrasive Waterjet Cutting of Al6061/SiC/Al2O3 Composite Using Principal Component Based Response Surface Methodology pp. 30-47 Downloads
M. Santhanakumar, R. Adalarasan and M. Rajmohan
Parameter Optimization of Thermal Barrier Coatings used in Two Stoke Externally Scavenged S.I. Engine using Non-Traditional Optimization Algorithms pp. 48-62 Downloads
Shailesh Dhomne and Ashish M. Mahalle

Volume 6, issue 3, 2016

Effect of Heat Treatment on Microstructure and Tensile Properties of A356/V2O5 Insitu Composites pp. 1-10 Downloads
Amneesh Singla, Rajnish Garg and Mukesh Saxena
Effect of Microstructure Degradation on Fracture Toughness of 20MnMoNi55 Steel in DBT Region pp. 11-27 Downloads
Sumit Bhowmik, Prasanta Sahoo, Sanjib Kumar Acharyya, Sankar Dhar and Jayanta Chattopadhyay
Thermal Power Plant Modelling with Fault Coverage Stochastically pp. 28-44 Downloads
Nupur Goyal, Mangey Ram, Akshay Bhardwaj and Amit Kumar
The Use of a Robotic Arm for Displacement Measurements in a Cantilever beam pp. 45-57 Downloads
George Lucas Dias, Ricardo Rodrigues Magalhães, Danton Diego Ferreira and Felipe Augusto Vitoriano

Volume 6, issue 2, 2016

Automotive Water Cooling System Analysis Subject to Time Dependence and Failure Issues pp. 1-22 Downloads
Nupur Goyal, Ajay Kaushik and Mangey Ram
A Review on Fabricating Procedures in Rapid Prototyping pp. 23-40 Downloads
Ganzi Suresh and K. L. Narayana
Gasoline and Synthetic Fuel from Plastic Waste: Study for Engine Performance pp. 41-50 Downloads
Apip Amrullah
Thermo-Mechanical Analysis on Thermal Deformation of Thin Stainless Steel in Laser Micro-Welding pp. 51-66 Downloads
Mohd Idris Shah Ismail, Yasuhiro Okamoto and Akira Okada

Volume 6, issue 1, 2016

Cutting Speed in Nano-Cutting as MD Modelling Parameter pp. 1-13 Downloads
Nikolaos E. Karkalos, Angelos P. Markopoulos and Dimitrios E. Manolakos
Electroless Nickel-Phosphorus Composite Coatings: A Review pp. 14-50 Downloads
Prasanna Gadhari and Prasanta Sahoo
FEA Simulation Based Performance Study of Multi Speed Transmission Gearbox pp. 51-61 Downloads
Ashwani Kumar and Pravin P. Patil
Improvement in Power Efficiency of Injection Molding Machine by Reduction in Plasticization Losses pp. 62-76 Downloads
Muhammad Khan, Nizar Ullah Khan, Muhammad Junaid Aziz, Hafiz Kaleem Ullah and Muhammad Ali Shahid

Volume 5, issue 4, 2015

Flexural Strength Improvement of Welded Joints Prepared by Vibratory Welding Process pp. 1-16 Downloads
P. Govinda Rao, P. Srinivasa Rao and A. Gopala Krishna
Optimization of Drilling Process on Al-SiC Composite using Grey Relation Analysis pp. 17-31 Downloads
K. Vinoth Babu, M. Uthayakumar, J. T. Winowlin Jappes and T. P. D. Rajan
Finite Element Analysis of Automotive Disk Brake and Pad in Frictional Model Contact pp. 32-62 Downloads
Belhocine Ali
Tensile Fracture in Laser Welding Joints of Al-Cu-Li-Mg-X Alloy Bearing Gaseous Porosity pp. 63-79 Downloads
Naveed Akhtar and SuJun Wu

Volume 5, issue 3, 2015

Optimization Analysis on the Crashworthiness of Light Aircrafts pp. 1-23 Downloads
Pu-Woei Chen and Yung-Yun Chen
A New Hybrid Simulated Annealing Algorithm for Large Scale Global Optimization pp. 24-36 Downloads
Seifedine N. Kadry and Abdelkhalak El Hami
Laminated Composite Stiffened Cylindrical Shell Panels with Cutouts under Free Vibration pp. 37-63 Downloads
Sarmila Sahoo
Study on Slurry Paste Boronizing of 410 Martensitic Stainless Steel Using Taguchi Based Desirability Analysis (TDA) pp. 64-77 Downloads
S.C. Atul, R. Adalarasan and M. Santhanakumar

Volume 5, issue 2, 2015

Analytical and Experimental Study of Electrochemical Micromilling pp. 1-16 Downloads
Abishek B. Kamaraj and Murali M. Sundaram
Technological Innovations in Machining of Inconel 718: A State of the Art pp. 17-43 Downloads
Vivek Aggarwal, Rajiv K. Garg and Sehijpal Singh Khangura
Assessment of Direct Laser Writing using Nd YAG Lasers for Microfluidic Applications pp. 44-58 Downloads
Muneer Khan Mohammed, Abdulrahman Al-Ahmari and Usama Umer

Volume 5, issue 1, 2015

Experimental Study of the Effect of Post Processing Techniques on Mechanical Properties of Fused Deposition Modelled Parts pp. 1-20 Downloads
Addanki Sambasiva Rao, Medha A. Dharap and J. V. L. Venkatesh
Analysis of Hardness by Parametric Optimization of Gravity Die Casting for A-356 Aluminium Alloy Using Taguchi Technique pp. 21-34 Downloads
Shyam Kumar Karna, Ran Vijay Singh and Rajeshwar Sahai
Application of Grey Taguchi based Response Surface Methodology (GT-RSM) in Injection Moulding of Polypropylene/E-glass Composite pp. 35-48 Downloads
M. Santhanakumar and R. Adalarasan
Characterization of Cutting Parameters in the Minimum Quantity Lubricant (MQL) Machining Process of a Gearbox pp. 49-60 Downloads
J. A. Travieso-Rodriguez, G. Gomez-Gras, Silvia Garcia-Vilana, Ferran Mainau-Noguer and R. Jerez-Mesa

Volume 4, issue 4, 2014

Optimization Studies on Electroless Nickel Coatings: A Review pp. 1-25 Downloads
Sanjib Kundu, Prasanta Sahoo and Suman Kalyan Das
FEA Based Study of Loose Transmission Gearbox Housing pp. 26-37 Downloads
Ashwani Kumar, Himanshu Jaiswal and Pravin P. Patil
Multiresponse Analysis in Abrasive Waterjet Machining Process on AA 6351 pp. 38-48 Downloads
Naresh Babu Munuswamy and M. Nambi Krishnan
Application of the Entropy Weight and TOPSIS Method on Al–12% SiC Metal Matrix Composite during EDM pp. 49-63 Downloads
Bharat Chandra Routara, Rajesh Kumar Bhuyan and Arun Kumar Parida

Volume 4, issue 3, 2014

Comparative Performance In Hard Turning Of AISI 1015 Steel With Carbide Insert Using Orthogonal Array Design And Grey Relational Analysis Under Spray Impingement Cooling And Dry Environment: A Case Study pp. 1-32 Downloads
Purna Chandra Mishra, Dipti Kanta Das and Susant Kumar Sahu
Effect of Tempering Temperature on Microstructure, Texture and Mechanical Properties of a High Strength Steel pp. 33-49 Downloads
Pradipta Kumar Jena, K. Siva Kumar and A.K. Singh
Design of Fault Detection System for Automobile Power Train Using Digital Signal Processing and Soft Computing Techniques pp. 50-63 Downloads
Karthik V. Shankar, Kailasnath K and S. Babu Devasenapati

Volume 4, issue 2, 2014

Hybrid Line Search and Simulated Annealing For Production Planning System in Industrial Engineering pp. 1-13 Downloads
P. Vasant
Investigation on Residual Stress and Flank Wear of Tool Insert in Hard Turning of Chrome Plated EN24 Substrate pp. 14-28 Downloads
K.N. Mohandas, C.S. Ramesh, Eshwara Prasad Koorapati and N. Balashanmugam
Multi-Objective Optimization of EDM Process Parameters using Taguchi Method, Principal Component Analysis and Grey Relational Analysis pp. 29-46 Downloads
U. Shrinivas Balraj and A. Gopala Krishna
CMAC Based Hybrid Control System for Solving Electrohydraulic System Nonlinearities pp. 47-72 Downloads
Amro Shafik, Magdy Abdelhameed and Ahmed Kassem

Volume 4, issue 1, 2014

Neural Network Based Modelling and GRA Coupled PCA Optimization of Hole Sinking Electro Discharge Micromachining pp. 1-21 Downloads
Rajesh Kumar Porwal, Vinod Yadava and J. Ramkumar
Experimentation and Analysis into Micro-Hole Machining of Ti-6Al-4V by Micro-EDM Using Boron Carbide Powder Mixed De-Ionized Water pp. 22-41 Downloads
G. Kibria, I. Shivakoti and B. Bhattacharyya
Drilling Of Tio2 and Zns Filled Gfrp Composites: A Taguchi Approach pp. 42-54 Downloads
Arun K. V., Sujay Kumar D. and Murugesh M. C.
Unsteady Numerical and Experimental Study of Cavitation in Axial Pump pp. 55-68 Downloads
Mohamed Adel and Nabil H. Mostafa
Coupled Field Thermoelectric Simulation of High Voltage Ceramic Cap and Pin Disc Type Insulator Assembly pp. 69-86 Downloads
R. D. Palhade, V. B. Tungikar, G. M. Dhole and S. M. Kherde
Page updated 2017-03-26