EconPapers    
Economics at your fingertips  
 

Trends In Civil Engineering And Its Architecture

2018 - 2018

Current editor(s): Mary John

From Lupine Publishers, LLC
Bibliographic data for series maintained by Mary John ().

Access Statistics for this journal.
Track citations for all items by RSS feed
Is something missing from the series or not right? See the RePEc data check for the archive and series.


Volume 3, issue 2, 2018

Influence of Fly Ash as Mineral Filler in Bituminous Mix Design pp. 364-369 Downloads
Akhtar Hossain, Tasaddik Khan, Jonayed Ahmed and Ashikuzzaman
Effect of Brick Forming Load on Mechanical Properties of Fly-Ash Bricks pp. 370-375 Downloads
Md. Ashikuzzaman, Tarif Uddin Ahmed, Zahidul Alam and Md. Altaf Hossain

Volume 3, issue 1, 2018

Structural Insulated Panels: State-of-the-Art pp. 336-340 Downloads
Panjehpour, Eric Wooi Kee Loh and Deepak Tj
Plastic in Brick Application pp. 341-344 Downloads
Siti Nabilah Amir and Nur Zulaikha Yusof
Physico-Mechanical Properties of Plaster Mortar Reinforced with Date Palm Fibers pp. 345-350 Downloads
Rachedi Mokhtar, Kriker Abdelouahed and Mokhtari Abdessamed
Comparison of Non-Destructive and Destructive Testing on Concrete: A Review pp. 351-357 Downloads
Sakshi Gupta
Formal Region Delineation on the Basis of Agricultural Productivity and Growth Center pp. 358-363 Downloads
Nazmun Nahar Lubna, Muhaiminul Islam, Tisha Sarkar and Anutosh Das

Volume 2, issue 5, 2018

Discussion on Steel Fiber Reinforced Concretes (SFRC) pp. 310-311 Downloads
Ä°rem Åžanal
Sustainability Practices for Urban Housing Societies pp. 312-314 Downloads
Saha Dauji
Optimization of Waste Discharge Points in Natural Streams pp. 315-323 Downloads
Ezeilo Fe and Agunwamba Jc
Smart City by Smart Lighting- Utilizing Smart Lighting in Urban Texture Based on Effective Using of Power to Save in Macro Economy and Create Diversity in Cities pp. 324-331 Downloads
Amir Reza Goudarzi
Failure Analysis of Thermo-Mechanically Treated (TMT) Bar During Bending Operation- A Metallurgical Investigation pp. 332-335 Downloads
Souvik Das, Goutam Mukhopadhyay, Sandip Bhattacharya and Sandip Thalukdar

Volume 2, issue 4, 2018

Integration of Multiple Uses to Create a Central Place for the Community: An Approach towards a Sustainable Town Centre Development at Baze Shilinda, Rajshahi pp. 265-272 Downloads
Abdulla - Al Kafy, Abdulla - Al Kafy, Nahidul Islam, Sabrina Sharmin, Farhana Mahzabin, Mahmud Arafat, Sumita Roy and Lamia Ferdous
Comparison between: Concrete Flat-Slabs and Tunnel Form Construction (Tcf) pp. 273-279 Downloads
Hiba Alhawasli and Khosroo Daneshjoo
Application of Non-Destructive Testing and Signal Processing Characteristics to Identify Defects and Microstructural Changes in Advanced High Strength Steels pp. 280-284 Downloads
Isaac Garcia C, Zhanfang Wu, Zhanfang Wu and Zhanfang Wu
Community Perception to Reduce Safe Drinking Water Scarcity A Case Study at Debishing Para In Rajshahi City Corporation Area, Bangladesh pp. 285-291 Downloads
Lamia Ferdous, Sabrina Sharmin, Md Nahidul Islam and Nazia Hossain
Estimating Traffic Volume to Identify the Level of Service in Major Intersections of Rajshahi, Bangladesh pp. 292-309 Downloads
Abdulla-Al Kafy, Lamia Ferdous, Mahmud Arafat, Sherazum Monira, Md. Shazzu Rahman, Nashid Rahman, Farzana Afroz, Farhana Mahzabin, Tofael Ahmed, Nahid Akhtar Khan, Saleha Akhter Poly, Hossain Mohiuddin and Nazia Hossain

Volume 2, issue 3, 2018

Modelling and Simulation of Rainfall-Runoff Relations for Sustainable Water Resources Management in Ethiope Watershed using SCS-CN, ARC-GIS, ARC-HYDRO, HEC-GEOHMS and HEC-HMS pp. 206-239 Downloads
Ihimekpen Ni, Ilaboya Ir and Onyeacholem Of
Seismic Strengthening RC Structures Approaches pp. 240-243 Downloads
Kaveh Ostad Ali Askari, Vijay P Singh, Nicolas R Dalezios and Theodore C Crusberg
Improving Residential Buildings Performance against the Explosion Using Passive Defense Requirements Case Study- Designing a Residential Building in Damascus pp. 244-251 Downloads
Alhawasli H and Daneshjoo Kh
Analysis of Rainfall Trend in Selected States with in the Coastal Region of Nigeria using non-Parametric Mann-Kendall Test Statistics pp. 252-259 Downloads
Ihimekpen Ni, Ilaboya Ir and Awah Lo
Nonlinear Analysis of Space Structures under Dynamic Loads pp. 260-264 Downloads
Qasim M Shakir

Volume 2, issue 2, 2018

Waste to Worth - Sludge Containing Calcium Carbonate into Useful Building Materials - an Indian Context pp. 173-174 Downloads
Varinder S Kanwar
Fraud Evaluation in Public Management: Legal Aspects of Engineering pp. 175-188 Downloads
Fábio Marcio Bisi Zorza and Sergio João Ferreira Lievore
Dynamic Analysis of a Real Footbridge Structure in a Najaf City pp. 189-191 Downloads
Saad Al Wazni, Alaa Abdalabbas, Roqia Hayder and Zainab Mierr
Physico-Chemical Analysis and Modelling of Ground Water Quality Parameters Using Water Quality Index Method (WQI) and Principal Component Analysis (PCA) pp. 208-222 Downloads
Ilaboya Ir and Kayode Ojo N
Advanced Material Development and Manufacturing, with Focus on Infrastructure Renovation pp. 223-225 Downloads
Hota Ganga Rao, Maurice A and Jo Ann Wadsworth

Volume 2, issue 1, 2018

An Experimental Study on Human Hair Fiber Reinforced Concrete pp. 129-133 Downloads
S Kaleem A Zaidi, Talha Sm, Manisha Bhati and Shobha Ram
Behavior of Normal and High Strength Reinforced Concrete Structures under Blast Loading pp. 134-144 Downloads
Mamoun A Alqedra, Mohammed H Arafa and Mahmod Shaheen
Study of the Influence of Curing Processes on Mechanical Resistance Properties of Concretes pp. 145-149 Downloads
Grillo Rhf, Grillo Kvf, Rodrigues Ap, Pereira McA, C Oliveira and Maestrelli Sc
Sete Fontes- a Challenge to Promote the Heritage Legacy andFacing Water Sources Scarcity in the city of Braga-Portugal pp. 150-157 Downloads
Vieira Jmp, Duarte Aals and Ramisio Pj
Expected Seismic Risk in a District of the Sant’antimo’s Historical Centre pp. 158-172 Downloads
Antonio Formisano and Nicola Chieffo

Volume 1, issue 5, 2018

Application of Preplaced Aggregate Concrete to Convert the Ballasted Railway Tracks into Slab Tracks pp. 102-107 Downloads
Morteza Esmaeili, Milad Hosein Esfahani and Ali Hemati
Improving Tectonic Geomorphology Analysis and Interpretation of River Mobility Utilizing LiDAR-derived DEMs pp. 108-116 Downloads
Saied Pirasteh
Concrete Cloth: An Innovative Versatile Construction Material pp. 117-120 Downloads
Bharat Bhushan Jindal
Critical Reviews on Topology Optimisation of Reinforced Concrete pp. 121-124 Downloads
Sreevidya V and Nidhi M
A Study on the Soundness of Parent Rocks in Sri Lanka pp. 125-128 Downloads
Ude S Jayawardena

Volume 1, issue 4, 2018

Estimation of the Grid Reinforcement Influence on Asphalt Plate Behaviour through FEM Analysis and Laboratory Testing pp. 63-71 Downloads
Gajewski Marcin and Gajewska Beata
Re-Classification of Roofs in Multi Storey Design Education and Application: A Pedagogic Approach pp. 72-79 Downloads
Botchway Ea and Aba Essanowa Afful
Analytical Modelling of the Historical Diyarbakir Karasu Bridge for its Ability to Carry Civil and Military Transport pp. 80-86 Downloads
Mustafa Kaya
Polyurea Coated and Plane Reinforced Concrete Panel Behavior under Blast Loading: Numerical Simulation to Experimental Results pp. 87-98 Downloads
Natalia L Carey, John J Myers, Domenico Asprone and Costantino Menna
FRP-Retrofitting RC Bridges for Stabilization in Earthquakes pp. 99-101 Downloads
Kenneth C Crawford and Stojan Krsteski

Volume 1, issue 3, 2018

Estimating Deformations of Laboratory Structures Subjected to Loadings Using Images Collected with Phone Cameras pp. 43-45 Downloads
Rolands Kromanis
Ferrocement - A Versatile Light Weight Construction Material pp. 46-47 Downloads
Mumtaz A Quraishi and Sabih Akhtar
Applications of ICTs and Action Recognition for Construction Workers pp. 48-54 Downloads
Ren-Jye Dzeng, HsienHuiHsueh and Keisuke Watanabe
The Revival of a Traditional Engineering – New Trends in Geotechnical Engineering Research pp. 55-56 Downloads
Wing Shun Kwan
A New Passive bar Damper Device for Alleviation of Structural Damages of Structures Subjected to Seismic Motions pp. 57-62 Downloads
Khaled Ghaedi, Ahad Javanmardi, Zainah Ibrahim, Usman Hanif, S Kashif Ur Rehman and AnasShaiban

Volume 1, issue 2, 2018

Electron Beam Additive Manufacturing with Wire pp. 25-26 Downloads
Węglowski M and St Błacha S
Experimental Investigation on FRP Composite Compression Members pp. 27-28 Downloads
Robert Yuan
Stabilization of Expansive Soil Using Wheat Husk Ash and Granulated Blast Furnace Slag pp. 29-35 Downloads
Khaja Moniuddin and Chethan K
Trends in Developing Critical Elastic Buckling Formula for Fixed Rectangular Plate Subjected To a Concentrated Load pp. 36-38 Downloads
Rui Jiang and Liqiang Jiang
The Role of Engineering Design in the Infection Control for Hospitals pp. 39-42 Downloads
Bruno Perazzo Pedroso Barbosa

Volume 1, issue 1, 2018

Nanotechnology in Concrete: Small Things Shape a Great Future pp. 1-6 Downloads
Siqi Ding, Liqing Zhang, Baoguo Han, Jinping Ou and Xun Yu
Although the well-known standard Lagrange multiplier method (LMM) can even produce higher accuracy and easier implementation than other conventional schemes (e.g., the modified variational principle, the Nitsche’s method), however it inherently owns many difficulties in solving the system of discretized equations, mainly caused by new unknown Lagrange multipliers. The LMM naturally increases the problem size and leads to a poorly conditioned matrix equation. The singularity is also often encountered because of inappropriate selection of interpolation space for the Lagrange multiplier. In this paper, we propose an improved method, called reduced Lagrange multiplier method, which can overcome such drawbacks raised by the LMM in treating the Dirichlet-type boundary conditions in terms of Isogeometric Analysis. By simply splitting the system equations into boundaries and interior groups, the size of system equations derived from the LMM is reduced; no additional unknowns have been added into the resulting system of equations; the Lagrange multiplier is hence disappeared; and more importantly the singular problem mentioned is avoided. The accuracy and convergence rates of the proposed method are studied through three numerical examples, exhibiting all the desirable features of the method. Optimal convergence rate and high accuracy for the present method is found pp. 7-14 Downloads
Shuohui Yin, Tiantang Yu and Tinh Quoc Bui
Advanced Ventilation Systems−Theory, Practice, Limitations and Solutions pp. 15-16 Downloads
Bin Yang, Angui Li, Bin Yang and Zhang Lin
Evaluation of the Performance of Asphalt Binder Modified With Nanoparticles pp. 17-21 Downloads
Shaban Ismael Albrka
Beneficial Use of Nano-Silica in Concrete- A Review pp. 22-24 Downloads
Aly Said, Achraf Ayad and Mohamed Zeidan
Page updated 2019-07-27