Acta Mechanica Malaysia (AMM)

2018 - 2024

Current editor(s): Dr. Alias B. Mohd

From Zibeline International Publishing
Bibliographic data for series maintained by Zibeline International Publishing ( this e-mail address is bad, please contact ).

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 7, issue 2, 2024

COMBINED TWISTED TAPE AND NANOFLUIDS IMPROVEMENT HEAT TRANSFER TECHNIQUES IN HEAT EXCHANGERS: REVIEW ARTICLE pp. 85-90

Kadhum Audaa Jehhef, Faris Ali Badawy and Nisreen Mezher Rahmah

KINEMATICAL GENERALIZATIONS OF THE BRACHISTOCHRONE PROBLEM pp. 91-95

Mehmet Pakdemirli

DESIGN AND FABRICATION OF SOYBEAN GRADER MACHINE pp. 96-103

Milufarzana, Md Esme Adom, Md Rakib Hasan, Md Hamidul Islam, Mahedi Hasan and Selina Banu

HOUSEHOLDS FUEL CONSUMPTION PREFERENCES: EMPIRICAL EVIDENCE FROM JOS-NORTH, NIGERIA pp. 104-108

Godfrey C. Onuwa

CFD MODELING OF A RADIATOR AXIAL FAN FOR AIR FLOW DISTRIBUTION BY COMPARING THE FOUR DIFFERENT DESIGNS FOR THE FAN pp. 109-138

Monaem Elmnifi, Mohamed A. Elhaj and Osama D.H Abdulrazig

ENVIRONMENT-CONTROLLED DRYING OF CUT-ROSELLE: ANALYSIS OF DRYING-PARAMETERS & VALIDATION OF MODIFIED-PAGE II pp. 139-163

I.E. Saeed and Zulkhairi Zainol Abidin

COMPARISON OF MODIFIED RICE MILL AND JAPANESE MADE POLISHING MACHINE FOR SAPONIN REMOVAL OF QUINOA pp. 164-166

Pem Lham, Kinga Norbu and Ugyen Phuntsho

PRESENT STATUS AND PROBLEM CONFRONTATION OF FARM MECHANIZATION IN BANGLADESH pp. 167-174

Mohahammad Bashir Ahmed, Md. Darus Salam, Jannatul Mursaleen Oyshy and Md. Matiul Islam

EVALUATION AND THERMAL-ANALYSIS OF A SOLAR-ASSISTED DRYING-SYSTEM: ECONOMIC ANALYSIS pp. 175-182

I.E. Saeed and Zulkhairi Zainol Abidin

TRUNCATION EFFECTS OF OPTICAL PERFORMANCE FOR DIFFERENT SOLAR GEOMETRICAL- CONCENTRATORS pp. 183-186

Khalifa Khalifa, Imhamed M. Saleh, Mohamed Bughazem and Ali k. Diryag

Volume 7, issue 1, 2024

AN INVESTIGATION OF SAND PRODUCTION PROBLEM IN THE SARIR OILFIELD pp. 01-15

Saleh S. H. Emtaubel and Jalal Hamed Senussi

ANALYZING THERMAL-HYDRAULIC PARAMETERS DURING COLD LEG LOSS OF COOLANT ACCIDENT WITHOUT REACTOR SCRAM USING PCTRAN MODEL OF VVER-1200 pp. 16-22

Muhammed Mufazzal Hossen and Mahmud Hossain Saikat Ahmed

THE ROLE OF THE CARBON FILTER (CATALYST) IN CARS AND THE EFFECT OF ITS REMOVAL pp. 23-27

Rabia Almahdi Ali Khalil, Ehab Ali S Eshtiwi and Amna Alajily Tantoush

DRAG REDUCTION OF A FINITE CIRCULAR CYLINDER WITH A BOXFISH-LIKE EXTENDED SURFACE pp. 28-39

Dewan Hasan Ahmed, Md. Sakib Ibn Mobarak Abir, Redwan Hossain, Ikram Hossain and Shorob Alam Bhuiyan

REVIEW OF THE APPLICATION OF BIDIRECTIONAL BLADES IN HORIZONTAL AXIS TIDAL TURBINES pp. 40-44

Zihang Wang

TRACTOR OPERATED PLASTIC MULCH LAYING IMPLEMENT FOR VEGETABLE CULTIVATION AS PART OF CLIMATE SMART TECHNOLOGY pp. 45-48

Pem Lham, Kinga Norbu, Ugyen Phuntsho and Dorji Tshomo

ENVIRONMENT-CONTROLLED THIN-LAYER-DRYING OF CUT-ROSELLE: DRYING-EXPERIMENTS, EFFECTS OF DRYING-SETTINGS, DRYING-MODELS pp. 49-59

I.E. Saeed and Zulkhairi Zainol Abidin

EVALUATION AND THERMAL-ANALYSIS OF A SOLAR-ASSISTED DRYING-SYSTEM: STUDY OF THE SYSTEM’S MAIN COMPONENTS pp. 60-77

I.E. Saeed and Zulkhairi Zainol Abidin

CREATE A NEW SOLAR CONSTANTS (a,b) TO CALCULATE THE INTENSITY OF SOLAR RADIATION FROM THE EQUATION OF SOLAR BRIGHTNESS, SPECIFICALLY IN LIBYA pp. 78-79

Osama D.H. Abdulrazig

AREA SWEPT BY THE RADIUS OF CURVATURE OF A FUNCTION AND APPLICATIONS TO MECHANICS pp. 80-84

Mehmet Pakdemirli

Volume 5, issue 2, 2022

A PCTRAN BASED ANALYSIS ON THE EFFECT OF BREAKSIZE AND COMPARATIVE STUDY BETWEEN HOT AND COLD LEG LOSS OF COOLANT ACCIDENTS IN VVER 1200 POWER REACTOR pp. 31-34

Salauddin Omar and Mohammad Nasim Hasan

MECHANIZATION IN FRUIT CULTIVATION: PRESENT STATUS, ISSUES, CONSTRAINTS AND FUTURE ASPECTS OF NEPAL pp. 35-43

Shailendra Khatri and Shreemat Shrestha

DESIGN OF A NEW POTATO COMBINE HARVESTER pp. 44-46

Lili Xin and Jihui Liang

DESIGN, FABRICATION AND EXHAUST GASES ANALYSIS OF CORN COB FEEDING UNIT INSTALLED WITH STEAM BOILER pp. 47-51

Muhammad Azhar Ali, Abdul Ghani, Abdul Nasir, Muhammad Yamin and Muhammad Nadeem

ASSESSMENT OF THE SUITABILITY OF SOLAR ELECTRICITY ADOPTION IN POULTRY INDUSTRY OF PAKISTAN pp. 52-57

M.A. Ali, M. Matloob, A.Raza, A. Sahar and M. Yamin

Volume 5, issue 1, 2022

MIXED CONVECTION BETWEEN HOT AND COLD CYLINDERS IN SQUARE CHAMBER: STUDY THE DIRECTION AND VALUE OF THE ROTATIONAL SPEED pp. 01-05

Houssem Laidoudi and Mourad Mokeddem

EFFECT OF THE OUTLET ORIFICE ONTHE COOLING SYSTEM OF HEAT EXCHANGE pp. 06-10

Houssem Laidoudi and Ismail Tlanbout

BENDING ANALYSIS OF FG POROUS BEAM BASED ON SIMPLE TIMOSHENKO BEAM ELEMENTS pp. 11-15

Lan Hoang That Ton

NANOFLUIDS HEAT TRANSFER INTENSIFICATION IN DOUBLE PIPE HEAT EXCHANGERS: REVIEW ARTICLE pp. 16-23

Faris Ali Badawy

EVALUATION OF CORROSION INHIBITIVE PROPERTIES OF NATIVE BANANA (MUSA ACUMINATE COLLA) ON MILD STEEL IN 1M SULPHURIC ACID (H2SO4) pp. 24-30

Kaywood Elijah Leizou and Muhammad Aqeel Ashraf

Volume 4, issue 2, 2021

ASSESSMENT AND ADAPTATION OF A NAERC PEDAL MILLET THRESHER FOR THRESHING SORGHUM (Junelo) IN NEPAL pp. 27-33

Shailendra Khatri, Shreemat Shrestha, Ganga Ram Bhandari and Sanjeet Kumar Jha

AUTOMATED AISI 317L SS THIN SECTION IMAGE POROSITY RECOGNITION AND SEMI-AUTOMATED PRIORITIZATION FOR PREDICTING THE YIELDING POSITION BY MEANS OF IMAGE PROCESSING pp. 34-39

Alireza M.Haghighi and Davood Khodadad

A REAL-TIME AUTONOMOUS FACE-TRACKING SYSTEM BASED ON A 2-DOF ARTICULATED MANIPULATOR PLATFORM USING EXTENDED KALMAN FILTER pp. 40-43

Sameer Kumar Devarakonda, Randhir Kumar, Amit Kumar Nandi and Palash Poddar

Volume 4, issue 1, 2021

PHYSICAL PROPERTIES AND SHEAR STRENGTH OF BOILER SLAG pp. 01-04

Norbaya Sidek, Hafez. M.a, Abdul Samad Abd Rahman and Puteri Elya Ruzilan

A CONCEPTUAL DESIGN OF WASTE MANAGEMENT: SMART BIN DEPLOYMENT IN SURABAYA SMART CITY pp. 05-09

Wahyu Andy Prastyabudi and Oktavia Ayu Permata

PERFORMANCE EVALUATION AND ECONOMIC ATTAINABILITY OF THE CHINESE WALKING TYPE SELF-PROPELLED REAPER FOR RICE HARVESTING IN NEPAL pp. 10-18

Shailendra Khatri, Shreemat Shrestha and Keshab Prasad Pokharel

ESSENCE OF THE TAGUCHI AND GRA METHOD IN OPTIMIZATION OF CUTTING PARAMETERS: A REVIEW pp. 19-21

Gaurav Kumar, Khushboo Sharma and Mukesh Kumar

NUMERICAL MODELING THE EFFECTS OF ADDITIVE MANUFACTURING PARAMETERS, HEAT TREATMENT AND ORIENTATION ON RESIDUAL STRESS AND DISTORTION OF METAL POWDER IN718 PUMP IMPELLER FABRICATION pp. 22-26

Alireza M. Haghighi

Volume 3, issue 2, 2020

The Role Of Concave Walls Of Inner Cylinder On Natural Convection In Annular Space pp. 24-28

Houssem Laidoudi

Performance Evaluation Of Wheat Straw Chopper Blower pp. 29-32

Rana Shahzad Noor, Fiaz Hussain, Abu Saad and Muhammad Umair

The Assessment Of Inhibitive Effect Of Cymbopogon Citratus On Marine Corrosion Of Mild Steel pp. 33-36

Rosliza Ramli and Mohamed Ali Syed Sultan Ibrahim

Experimental Study Of Airborne Dust Generation During Powder Free Falling pp. 37-39Volume: 3

Nur Anis Liyana Azha and Siti Ilyani Rani

Effects Of Welding Current And Speed On Residual Stress And Distortion Of Joining St52 Rolled Plate In Different Welding Sequences pp. 40-45

Ali Aminifar and Alireza M. Haghigh

Volume 3, issue 1, 2020

Strategic Evaluation In Optimizing The Internal Supply Chain Using Topsis: Evidence In A CoilWinding Machine Manufacturer pp. 1-4

Dilip U Shenoy, Vinay Sharma and Hc Shiva Prasad

Structural, Thermal And Thermo-Mechanical Analysis Of Four Stroke Petrol Engine Piston Using Cae Tools pp. 5-10Volume: 3

S. Sathishkumar and M.Kannan

Effects Of Welding Parameters, Time Interval And Preheating On Residual Stress And Distortion Of Joining St52 Stiffener Ring In An Aisi 4130 Tubular Shell pp. 11-15Volume: 3

Alireza M. Haghighi and Farhad S. Samani

A Case Of Palpa District Of Nepal pp. 16-19

Khanal Arjun Prasad

Thermal Stress Analysis of Integrated combustion Engine Piston Using CAE Tools (Aluminum Silicon Alloy, Aluminum Silicon Alloy Steel) pp. 20-23

S. Sathishkumar, M. Kannan and R.L. Sankarla

Volume 2, issue 2, 2019

Effect Of Surfactant Addition On The Nanofluids Properties: A Review pp. 01-19

Kadhum Audaa Jehhef and Mohamed Abed Al Abas Siba

Evaluating the Impact of Unsteady Viscous Flow and Presence of Solid Particles on Pipeline Surfaces During Crude Oil Transport Using Computational Fluid Dynamics Analysis pp. 20-27

Chukwugozie Jekwu Ejeh, Gbemisola Precious Akhabue, Chigozirim Cyprian Onyekperem, Evans Boah Annan and Kingsley Kwaah Tandoh

Topsis Based Optimization Of Process Parameters While Hard Turning Of Aisi 52100 Steel pp. 28-31

P. Umamaheswarrao, D. Ranga Raju, Kns Suman and B. Ravi Sankar

A Pctran-Based Investigation On The Effect Of Inadvertent Control Rod Withdrawal On The ThermalHydraulic Parameters Of A Vver-1200 Nuclear Power Reactor pp. 32-38

Abid Hossain Khan and Md Shafiqul Islam

Study On Sedimentation Stability Of Mahua And Simarouba Oil Based Magnetorheological Fluids pp. 39-44

Ram Rohit Vannarth, K. Mallikharjuna Babu and P. Martin Jebraj

Volume 2, issue 1, 2019

Topology Optimization Of Integrated Combustion Engine Piston Using F ea Method (Cae Tools) pp. 1-5

S. Sathishkumar and Dr. M. Kannan

Analysis And Optimization Of Connecting Tie Rod Assembly In Agriculture Application pp. 6-10

L. Natrayan, E. Aravindaraj, M.S. Santhosh and M. Senthil Kumar

Potential Of Municipal Solid Waste In Libya For Energy Utilization pp. 11-15

Monaem Elmnifi, Moneer Alshilmany and Moftah Abdraba

Computational Investigation Of Mhd Free Convection On A Flat Vertical Plate Embedded With Micro Polar Fluid pp. 16-22

S.K. Gugulothu, N. Prabhu Kishore, V.Phani Babu and Girish Sapre

Cfd Analysis On Different Piston Bowl Geometries By Using Split Injection Techniques pp. 23-28

S.K. Gugulothu, N. Prabhu Kishore, V.Phani Babu and Girish Sapre