Journal of Mechanical Engineering Research & Developments (JMERD)

2018 - 2019

Current editor(s): Distinguished Prof. T M Indra Mahlia

From Zibeline International Publishing
Bibliographic data for series maintained by Zibeline International Publishing ( this e-mail address is bad, please contact ).

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 42, issue 3, 2019

Performance Evolution Of An Improved Solar Thermal Hot Air Heating System For Drying Ground-Nut pp. 01-05

Agarwal A., Seretse O.M., Letsatsi M.T., Maele L.T. and Koketso D.

Drop Test Simulation of Glass Fiber Reinforced Plastic (GFRP) Modular Pontoon Unit pp. 06-09

Nikolay E. Razinkin, Nina I. Voronova, Yaroslav D. Podlesnikov and Sergey N. Danilov

Influence Of The Human-Machine Systems (HMS) Operation Mode On The Increase Of Grain-Harvesting Aggregates Productivity pp. 10-14

Igor E. Lipkovich., Irina V. Egorova, Nadezhda V. Petrenko and Anna S. Gayda

Effective Technologies Of Dissolution Of Organic Deposits In The Bottomhole Zone Of Oil Wells Registration Form pp. 15-18

Dairabay Zh. Abdeli., Bae Wisap and Bakytzhan R. Taubayev

Computer With Changeable Architecture pp. 19-23

Valery A. Konyavsky and Gennady V. Ross

Development Of Effective Technology Of Deep Water Treatment From Suspended Solid Particles For Formation Pressure Maintenance At The Oil Fields pp. 24-29

Dayrabay Zh. Abdeli, Wisup Bae, Assel B. Seiden and Adi Novriansyah

The Influence Of Nano Particles Additive On Tribological Properties Of Aa2024-T4 Coated With Tin Or Sin Thin Films pp. 30-34

Nasri S. M. Namer, Sami Ali Nama, Q. T. Medina and Marwan T. Mezher

Review Of Hydrogen Fuel For Internal Combustion Engines pp. 35-46

M. Faizal, L. S. Chuah, C. Lee, A. Hameed, J. Lee and M. Shankar

Investigation On The Mechanical Properties Of Pla & Its Composite Fabricated Through Advanced Fusion Plastic Modelling pp. 47-54

K.G. Jaya Christiyan, U. Chandrasekhar and K. Venkateswarlu

Applying Photoelasticity With Optical Magnification Method To Increase Precision Of Determining Fringe Order Under Monochromatic Light pp. 55-61

M.B.h Sitorus, Melvin Emil Simanjuntak, Agus Sigit Pramono., Henry Lumbantoruan, Udur January Hutabarat, B. Ginting, Piktor Tarigan and Teng Sutrisno

Assessment Of Engineering Speciality Teaching In The Period Of Integration pp. 62-65

Nguyen Thi Xuan Huong and Bui Thi Dieu Thuy

Investigating The Performance Of Electromagnetic Pump Fabricated Using Tool Based Micromachining Setup For Microdelivery Of Fluid pp. 66-70

Veeresha, R.k, Shilpa, M.K., Muralidhara, Rathnamala Rao and Nithin Kumar

A Study On The Factors Affecting The Flare Of The Weld When Welding The Steel Wire pp. 71-75

Minh Quang Chau

Improved The Adaptation For Three Phase Active Filter Under Non-IdealLoad Using Sample Current Control pp. 76-80

Huynh Le Minh Thien, Nguyen Xuan Tien, Tran Thanh Vu and Ho Van Cuu

Effect Of Different Quenching Media On Mechanical Properties Of Aisi 1018 Low Carbon Steel pp. 81-83

Sarah Jalal Mosa

Influence Of Vibrations During Directional Solidification On Microstructure, Hardness And Strength Of Al-Si-Graphite Fg Composite pp. 84-86

Ramesh Babu N, Ramesh Mr and Kiran Aithal S

Testing And Analysing The Grinding Uniformity Of Polymer Products pp. 87-90

Josef Flizikowski, Ali Al-Zubied, Zoalfokkar Kareem Alobad and I. A. C. Abar

A Numerical Study Of The Turbulence Model Influence On A Savonius Wind Turbine Performance By Means Of Moving Mesh pp. 91-93

Nopem Ariwiyono, Priyo A. Setiawan, Adi W. Husodo, Arief Subekti, Anda I. Juniani, Subagio So’im, Projek P. S. Lukitadi, Rini Indarti and Fais Hamzah

Pseudo Elastic Methods For Damage Assessment Of Composite Tubes pp. 94-101

Venkateswarlu Gattineni and Venukumar Nathi

Influence Of Heat Treatment And Deformation On The Microstructure And Mechanical Properties Cu-Ni-Sn Alloy pp. 102-105

Nguyen Duong Nam

Effect Of Anisotropic Material On The Geometric Non-Linear Performance Analysis Of Smart Laminated Composite Plate Integrated With Distributed Afc Patches pp. 106-109

Srinivas M Prabhu, NithinKumar, Ashok M H, VishwanathKhadakbhavi and Santosh Nandurkar

Mixing In Turbulent Coaxial Jet pp. 110-119

Safer Nabil Belkacem. and Beghidja Abdelhadi

. Using Brass Foil Interlayer To Improve The Resistance Spot Welding AA5451 With Apply Taguchi Method pp. 120-124

Osamah Sabah Barrak, Mohammed Helan Sar, Mursal Luaibi Saad, Abbas Khammass Hussein and Sabah Khammass Hussein

Study Of Fracture Behaviour Of Composite Laminate With Central Circular Crack Exposed To Thermo-Mechanical Loading With Temperature Rise pp. 125-132

V.V.Venu Madhav, A.V.S.S.K.S. Gupta and P. Rakesh

Effect Of Cross Flow On Mass Suction In A Straight Louvered Funnel pp. 133-139

Avik Bhattacharya and A Madhusudan Achari

Volume 42, issue 2, 2019

Integration Of Teamwork Skills In Teaching In Order To Meet The Learning Outcomes In The Cdio Syllabus: Application To Technology And Engineering pp. 1-5

Diep Thi Ngoc Hoang and Thu Thi Anh Do

Algorithm Determine Trust Value To The Distributed Information Systems Elements pp. 6-9

Aleksei A. Sychugov, Elvir M. Akhmetshin, Vyacheslav M. Grishin, Raisa N. Shpakova and Andrei V. Plotnikov

Parallel Programming Models For Calculating The Physical Characteristics Of Composites pp. 10-13

Gulmira Baenova, Ainur Zhumadillayeva and Xiaoguang Yue

Network Intrusions Detection And Prevention Method Using A Team Of Intelligent Agents pp. 14-17

Aleksei A. Sychugov, Vasiliy Yu. Meltsov, Alexey S. Kuvaev and Vyacheslav M. Grishin

A Research On Marine Diesel Engine Speed Controller By Fuzzy Logic Control Theory Based On Experimental Investigation pp. 18-26

Tien Anh Tran and Gaoussou Haidara

Automation Of Calculations Of Technical Characteristics Of Manometric Tubular Springs pp. 27-29

Sergey P. Pirogov and Aleksandr Yu. Chuba

Optimization Of Technological Transport Sets Using Anylogic Simulation Environment pp. 41-43

Vladimir I. Bauer, Artem V. Bazanov, Evgeniy S. Kozin, Vasiliy M. Nemkov and Aleksandr A. Mukhortov

Energy And Exergy Analysis Of A Solar Photovoltaic Performance In Baghdad pp. 44-49

Fadhil Abdulrazzaq Kareem, Doaa Zaid Khalaf, Noor Samir Lafta and Yasser Abdul Lateef

Investigation Of Wireless Channels According To The Standard 802.11 In The Frequency Range Of 5 Ghz For Two Subscribers pp. 50-57

Dmytro V. Mykhalevskiy and Oksana S. Horodetska

Accurate Characterization Of Cracks In Beam-Like Structures Using Square Of Curvature Mode Shape: Without Baseline Data pp. 58-66

L Ramesh and Putti Srinivasa Rao

Perception Towards Industry Based Capacity Building In Instructors To Enhance Quality Approach In Engineering pp. 67-71

Agarwal A, Seretse O. M. and Letsatsi M.t

A Study Of Phase Transformation In Shape Memory Alloy Cual9fe4 pp. 72-75

Nguyen Duong Nam, Vu Anh Tuan, Nguyen Hai Yen, Dao Van Lap and Pham Mai Khanh

Calculation Of Cylindrical Products Made Of Composite Materials Using Wrap Technology pp. 76-78

Tran Thi Thanh Van, Tran Ngoc Thanh, Phạm Ngoc Vuong and Nguyen Duong Nam

Design And Fabrication Of Distillation Equipment Of Fresh Water From The Seawater By The Use Of The Waste Heat From Diesel Engines pp. 79-83

Van Vang Le and Lan Huong Nguyen

Influence Of Nickel On The Microstructure And Mechanical Properties Of Aluminum Copper Alloy pp. 84-86

Vu Anh Tuan Tuan, Nguyen Duong Nam, Pham Ngoc Vuong, Mai Van Thi and Pham Mai Khanh

Correlation Of Overall Heat Transfer Coefficient In The Three Zones Of Wire And Tube Condenser pp. 87-97

Van Viet Pham

Study On The Breakdown Of Milling Balls Made Of 13%Cr White Cast-Iron Working In Strong Abrasive And Clash Conditions pp. 98-100

Hoang Thi Ngoc Quyen, Nguyen Hong Hai, Vu Viet Quyen, Nguyen Van Bach and Nguyen Duong Nam

Experimental Investigation Of The Effect Of Baffle Cut Shape On Shell Side Pressure Drop In Shell And Tube Heat Exchanger pp. 101-105

Mahmud H. Ali

Drop Test Simulation of Glass Fiber Reinforced Plastic (GFRP) Modular Pontoon Unit pp. 106-110

F. Zakki, A. Windyandari, Q. T. Medina and I. A. C. Abar

Volume 42, issue 1, 2019

A Brief Review Of Technology Solutions On Fuel Injection System Of Diesel Engine To Increase The Power And Reduce Environmental Pollution pp. 1-9

Van Viet Pham and Duc Thiep Cao

The Bus Transportation Issue And People Satisfaction With Public Transport In Ho Chi Minh City pp. 10-16

Xuan Phuong Nguyen

Control Gas Nitriding Process: A Review pp. 17-25

Nguyen Duong Nam, Nguyen Anh Xuan Xuan, Nguyen Van Bach, Le Thi Nhung and Le Thi Chieu

Drag Investigation Around A Cylinder And Symmetric Airfoil In Tandem With Different Gaps And Angles Of Attack pp. 26-33

Humam M. Salih and Mustafa A. Abdulhussain

Multi Response Optimization Of Edm Process Parameters For Inconel X-750 Using Moora pp. 30-40

Shaik Khadar Basha, M.V. Jagannadha Raju, M.V. Jagannadha Raju and Murahari Kolli

The Heat Efficiency Of Residential Buildings In Libya pp. 34-41

Budhi Muliawan Suyitno, Amar Abobkr Amar Ahmeda, La Ode Mohamad Firman, Nely Toding Bunga, Erlanda Augupta Pane and Ismail

Performance Of Low-Cost Dual Circuit Solar Assisted Cabinet Dryer For Green Banana pp. 42-45

Cresencio P. Genobiagon Jr and Feliciano B. Alagao

Production And Mechanical Properties Of Al 6063/B4c Composites pp. 46-49

M. Venkatesulu and K. Rama Kotaiah

Learning Outcomes For Training Program By Cdio Approach Applied To Mechanical Industry 4.0 pp. 50-55

Tien Quoc Le, Diep Thi Ngoc Hoang and Thu Thi Anh Do

Design A Technical Process Of Thermal Spray Applied To The Crankshaft Rehabilitation Of Ship pp. 56-60

V.v Le, D.n Nguyen, T.T.v Tran and V.b Nguyen

Design And Analysis Of Pneumatic Bag Air Jack pp. 61-63

Timur Choban Khidir, Bilal Mohammed Qasim and Ayaz Aydin Abduljabbar

Research And Calculation Of The Biogas Fuel Supply System For A Small Marine Diesel Engine pp. 64-70

Van Hai Nguyen, Duc Thiep Cao and Thi Hien Do

Development Orientation For Higher Education Training Programme Of Mechanical Engineering In Industrial Revolution 4.0: A Perspective In Vietnam pp. 71-73

Thi Lan Anh Vu and Tien Quoc Le

Nonlinear Buckling Analysis Of A Cylindrical Shell Structures pp. 74-80

Hung Chien Do

Proposal Of Some Advanced Technology Methods In The Assembly Of The Shaft System - Main Engine On The Small Cargo Ships pp. 81-84

Quoc Viet Pham and Van Hai Nguyen

Influence Of Size And Weight Fraction Of Carbon Nanotube On Coefficient Of Thermal Expansion Of Al-Cnt Metal Matrix pp. 85-89

Pothamsetty Kasi V Rao and B. Raghu Kumar

Computational Study Of Flow Characteristics Over High Lift Airfoil At Various Angles Of Attack pp. 90-95

Ali H. Mutaib, Amjed AL-Khateeb, Mohammed K. Khashan and Furkan Kamil

Correlation Of Overall Heat Transfer Coefficient In The Three Zones Of Wire And Tube Condenser pp. 96-103

Anh Tuan Hoang

A Study Of Emission & Performance Characteristics Of Diesel Engine Run By Dual Fuel (Bio Diesel + Acetylene Gas) pp. 104-108

R. Sasikumar and G. Sankaranarayanan

Efficient Modelling and Simulation Of Wind Power Using Online Sequential Learning Algorithm For Feed Forward Networks pp. 109-115

Rashmi P. Shetty, A. Sathyabhama and Srinivasa Pai P.

The Effect Of Adding Candlenut Shell Into The Low-Rank Coal On Combustion Performance pp. 116-121

Daud Patabang, Effendy Arif, Jalaluddin and Nasruddin Aziz