Surface Review and Letters (SRL)

1994 - 2025

Current editor(s): S Y Tong

From World Scientific Publishing Co. Pte. Ltd.
Bibliographic data for series maintained by Tai Tone Lim ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 32, issue 04, 2025

A HYBRID ENSEMBLE LEARNING MODEL FOR EVALUATING THE SURFACE ROUGHNESS OF AZ91 ALLOY DURING THE END MILLING OPERATION pp. 1-14

Panchanand Jha, G. Shaikshavali, M. Gowri Shankar, M. Dinesh Sai Ram, Din Bandhu, Kuldeep K. Saxena, Dharam Buddhi and Manoj Kumar Agrawal

EXPERIMENTAL STUDY ON THE SURFACE ROUGHNESS AND OPTIMIZATION OF CUTTING PARAMETERS IN THE HARD TURNING USING BIOCOMPATIBLE TiAlN-COATED AND UNCOATED CARBIDE INSERTS pp. 1-14

Mithilesh K. Dikshit, Vimal K. Pathak, Reeya Agrawal, Kuldeep K. Saxena, Dharam Buddhi and Vinayak Malik

EXPERIMENTAL INVESTIGATION AND OPTIMIZATION OF HIGH SPEED MACHINING OF TITANIUM ALLOY FOR BIOMEDICAL APPLICATION pp. 1-12

Duc Nam Nguyen, Ngoc-Le Chau and Thanh-Phong Dao

FABRICATION AND CHARACTERIZATION OF MAGNESIUM-BASED Mg-TITANIA SURFACE COMPOSITE FOR BIOIMPLANTS pp. 1-12

Pankaj Sonia, Jinesh K. Jain, Kuldeep Kumar Saxena, Jayahari Lade, Vinayak Malik and Rajesh Singh

CHARACTERIZATION AND ELECTROCHEMICAL CORROSION ANALYSIS OF HEAT-TREATED REINFORCED HA COATINGS DEPOSITED BY VACUUM PLASMA SPRAY TECHNIQUE pp. 1-16

Amardeep Singh Kang, Gurbhinder Singh, Vikas Chawla, Chander Prakash, Ramanujam Radhakrishnan, Linda Yongling Wu and H. Y. Zheng

SURFACE MODIFICATION OF SS-316 TO ENHANCE CAVITATION RESISTANCE THROUGH COMPOSITE MICROWAVE CLADS pp. 1-16

Sandeep Bansal, Dheeraj Gupta and Vivek Jain

OPTIMIZATION OF MACHINING CHARACTERISTICS OF TITANIUM-BASED BIOMATERIALS: APPROACH TO OPTIMIZE SURFACE INTEGRITY FOR IMPLANTS APPLICATIONS pp. 1-11

Bharat Singh, Kuldeep K. Saxena, Ishaya M. Dagwa, Piyush Singhal and Vinayak Malik

Volume 32, issue 03, 2025

STRAIN TRANSFER ANALYSIS OF A FOUR-LAYER EMBEDDED FIBER OPTIC SENSING MODEL IN AN ELASTIC STATE pp. 1-12

Xuebing Zhang, Zhizhou Zheng, Huaping Wang and Ping Xiang

ERRATUM: INFLUENCE OF ARGON IRRADIATION ON ELECTRICAL PROPERTIES OF PVA/NaI POLYMER COMPOSITES pp. 1-1

A. Atta, B. M. Alotaibi, S. A. Waly, A. M. Abdel Reheem and Haifa A. Al-Yousef

A NOVEL MODEL FOR THE RELATIONSHIP BETWEEN THE HEALING TIME OF THE INERT FILM AND THE INCUBATION PERIOD OF LOCALIZED CORROSION pp. 1-8

Minghan Zhao, Yi Ren, Dongxu Chen, Haodong Wu, Jing Li, Yanwen Zhou and Xiang Wang

PERFORMANCE EVALUATION AND ECONOMIC ASSESSMENT IN ELECTRICAL DISCHARGE MACHINING OF SS316 USING GRAPHITE POWDER DISPERSED IN BIODEGRADABLE PALM OIL DIELECTRIC pp. 1-17

Sunita Sethy, Sudhansu Ranjan Das, Jaydev Rana, Amit Kumar Behera and Munish Kumar Gupta

THE EFFECT OF LASER OSCILLATING WELDING ON FORMATION AND PROPERTIES OF TITANIUM ALLOY pp. 1-13

Tianyao Chen, Zeyang Wang, Xiaotong Pang, Yonggang Tong, Xixi Ji, Mingjun Zhang, Jian Zhang, Hongwei Hu, Kaiming Wang and Qiang Jia

EXPERIMENTAL INVESTIGATION OF WEAR BEHAVIOR OF Al 8011/FLY ASH/B4C HYBRID METAL MATRIX COMPOSITE pp. 1-11

K. S. K. Sasikumar, N. S. Nandakumar, R. Gukendran and M. Sambathkumar

RECENT ADVANCES IN SURFACE MODIFICATION OF ENGINEERING MATERIALS BY TIG CLADDING PROCESS: A REVIEW pp. 1-15

Pritam Paul, Subrata Kumar Ghosh, Pabitra Maji, Rahul Kanti Nath and Prabhat Kumar

FAULT-TOLERANT CONTROL ALGORITHM FOR AUTOMOTIVE ELECTRONIC MECHANICAL BRAKING RAMP ASSIST pp. 1-10

Jianwei Liang

SELECTION OF BEST 3D PRINTING PARAMETERS FOR FUSED DEPOSITION MODELING PART USING A NOVEL HYBRID MULTI-CRITERIA OPTIMIZATION TECHNIQUE pp. 1-10

Rajeev Ranjan and Abhijit Saha

Volume 32, issue 02, 2025

RESEARCH PROGRESS OF HIGH PERFORMANCE COATINGS PREPARED BY TUNGSTEN INERT GAS (TIG) CLADDING ON TYPICAL METALLIC MATERIALS: A MINI REVIEW pp. 1-27

Ye Hao, Feng Han, Naiming Lin, Yang Yang, Qunfeng Zeng, Meisam Nouri and Xiubo Liu

FORMATION OF NANOCONES AND GENERATION OF NEGATIVE POTENTIAL ON STAINLESS STEEL SURFACES BY ELECTROCHEMICAL ETCHING SYNERGISTICALLY REDUCE PSEUDOMONAS AERUGINOSA'S BIOFILM pp. 1-16

Sanjay Kumar, Susmita Datta, Vidyut Dey and Dijendra Nath Roy

MATERIAL DEPOSITION FOR PATTERN GENERATION USING W–Cu SINTERED TOOL IN REVERSE EDM pp. 1-13

Rashed Mustafa Mazarbhuiya and Maneswar Rahang

ULTRASONIC-ASSISTED ELECTRODEPOSITION OF CoMo/Al2O3 COMPOSITE COATING ON THE SURFACE OF STEEL AND ITS CORROSION RESISTANCE IN SIMULATED SEWAGE WATER pp. 1-13

Jian Zhang, Lu Tang, Dandan Li and Xufeng Yu

OPTIMIZATION OF MACHINING AA4015/B4C METAL MATRIX COMPOSITES BY TAGUCHI METHOD pp. 1-11

K. T. Thilagham, P. C. Krishnamachary, S. Saravanakumar, A. Mahendran, S. Kaliappan, Manzoore Elahi M. Soudagar, Sathish Kannan, Sami Al Obaid and Sulaiman Ali Alharbi

STUDY ON THE PERFORMANCE OF ANODIZED COATING PREPARED ON 2024 ALUMINUM ALLOY VIA PULSE ANODIZING pp. 1-11

Kongbao Lu, Liang Chen, Minxiang Pan, Hangfu Yang and Yundan Yu

STUDY ON MAGNETIC PROPERTIES OF FeCoPSiBCu AMORPHOUS ALLOY BY EMPIRICAL ELECTRON THEORY pp. 1-6

Xiaoyu Wu, Xuanxuan Guo, Yue Gu, Shengli Li and Xue Li

CHARACTERIZATION AND OPTICAL STUDIES OF ION BEAM-IRRADIATED CA/PANI COMPOSITE MATERIALS pp. 1-9

Haifa A. Al-Yousef, B. M. Alotaibi, A. Atta, E. Abdeltwab and M. M. Abdelhamied

INVESTIGATION ON HYBRID FIBER METAL LAMINATE USING ULTRASONIC VIBRATION-COUPLED MICROWIRE ELECTRICAL DISCHARGE MACHINING pp. 1-19

M. Karthikeyan, S. Muthu Vijaya Pandian and R. Vijayakumar

Volume 32, issue 1, 2025

A SYSTEMATIC INVESTIGATION OF THE STRUCTURAL CHANGES IN CHEMICALLY AND THERMALLY REDUCED GRAPHENE OXIDE USING RAMAN AND XRD pp. 1-16

Manu Priyadarshani, Kumari Neha, Rupali Rani and Rishi Sharma

DLC FILMS ON Ti6Al4V SUBSTRATES OF NANOINDENTATION, SURFACE ROUGHNESS FOR LASER POWDER BED FUSION WAS PERFORMED UTILIZING ORTHOPEDIC IMPLANT MATERIALS pp. 1-11

M. Marichamy, K. Chockalingam and N. Arunachalam

COMPUTATIONAL INVESTIGATION OF EROSION CORROSION IN ELBOW PIPES UNDER VARYING FLOW CONDITIONS USING EXPLICIT DYNAMICS AND STATISTICAL ANALYSIS pp. 1-6

Hediye Deniz Ada

TAGUCHI-GREY OPTIMIZATION OF SURFACE ROUGHNESS AND MATERIAL REMOVAL RATE ON ELECTRO-DISCHARGE MACHINING OF NOVEL AA7075-TiO2 METAL MATRIX COMPOSITE USING WASTE CORNCOB BIOSILICA DIELECTRICS pp. 1-10

D. Sakthimurugan, L. Antony Michael Raj, V. Antony Aroul Raj and K. Thavasilingam

INFLUENCE OF HYBRID NANOCERAMIC PARTICLES ON MECHANICAL PROPERTIES THROUGH TAGUCHI APPROACH pp. 1-12

R. Meenakshi Reddy, K. Shanmugavel, Gangolu Nageswara Rao, S. Padmavathy, R. Balamurugan, S. Kaliappan, Syed Noeman Taqui, Sami Al Obaid and Sulaiman Ali Alharbi

INFLUENCE OF COOLING MEDIUM ON MICROSTRUCTURE AND MECHANICAL PROPERTIES IN FRICTION STIR PROCESSING OF MAGNESIUM ALLOY — A REVIEW pp. 1-20

C. Rathinasuriyan, R. Sankar, M. Puviyarasan, V. S. Senthil Kumar and K. Palanikumar

EXPLORING EPITAXIAL GRAIN GROWTH AND MARANGONI-INDUCED CONVERSION IN COLUMNAR DENDRITES: A STUDY OF INCONEL 718 ADDITIVE MANUFACTURING VIA DIRECT LASER ENERGY DEPOSITION pp. 1-9

M. Varatharajulu, Muthukannan Duraiselvam, G. V. Krishna Pradeep and B. Jagadeesh

OPTICAL PROPERTIES AND ANTIBACTERIAL ACTIVITY OF Ni, Mg, AND Fe-DOPED ZnO pp. 1-9

Tarek-Diab Ounis, Khaoula Rahmouni, Lamia Aouar and Mourad Zaabat

ENHANCED SURFACE QUALITY AND STRENGTH OF FDMed SPECIMENS USING BBD AND BIO-INSPIRED ALGORITHMS pp. 1-25

A. Tamilarasan and A. Renugambal

Volume 31, issue 12, 2024

PERFORMANCE OPTIMIZATION OF BS970 MILD STEEL TURNING PARAMETERS UNDER SiC-MoS2 HYBRID NANOFLUID USING HYBRID DEEP BELIEF NETWORK BASED COOT OPTIMIZATION pp. 1-20

Thangavel Palaniappan and Prakasam Subramaniam

AN IN-DEPTH INVESTIGATION ON KERF ANGLE IN PIERCED HOLE ON INCONEL-625 SUPERALLOY USING ABRASIVE WATERJET CUTTING PROCESS pp. 1-23

M. Santhanakumar, R. Vijayakumar, R. Adalarasan and M. Rajesh

INVESTIGATION OF THE MACHINING PERFORMANCE OF ALUMINUM–BRONZE ALLOY IN WEDM USING TAGUCHI METHOD pp. 1-7

Mehmet Burak Bilgin

DIRECT METAL LASER SINTERING TO DEVELOP COMPLEX CONTOURS OF AlSi10Mg ALUMINIUM ALLOY — BUILD PARAMETERS OPTIMIZATION pp. 1-13

M. Arockia Jaswin, R. Geetha, M. Saravanan and R. P. Elvin

RECENT PROGRESS IN THE SYNTHESIS AND PHOTOCATALYTIC DEGRADATION OF ORGANIC POLLUTANTS BY GRAPHENE-BASED TiO2 NANOCOMPOSITE: A REVIEW pp. 1-16

Leivon Chungkholen Kom, Henam Premananda Singh and Sankaranarayanan Nagarajan

WEAR RESISTANCE OF STELLITE 6 COATINGS AT HIGH TEMPERATURE pp. 1-11

Mukund Kumar and Satish Kumar

EFFECT OF SUGARCANE BAGASSE ASH ON AA7075 ALLOY-BASED COMPOSITES PREPARED THROUGH STIR CASTING ROUTE pp. 1-10

Z. A. Amjath, R. Ganesa Moorthy, V. Mohanavel and A. H. Seikh

EFFECT OF RANDOM DISTRIBUTION AND SHORT-RANGE ORDERING OF SOLUTES ON THE MECHANICAL PROPERTIES OF NANOCRYSTALLINE Cu–Ag ALLOYS pp. 1-5

Feng Zhang, Qiaoyun Tang, Youran Zhi, Deyong Wang and Liu Yang

EXPERIMENTAL, TRIBOLOGICAL STUDIES ON SINTERED Al–xV2O5–2B4C COMPOSITES USING BIO-OILS pp. 1-14

N. Selvakumar and S. Mohanasundaram

Volume 31, issue 11, 2024

A STUDY ON MULTI-OBJECTIVE OPTIMIZATION OF PULSED TIG WELDING PARAMETERS AND THEIR EFFECT ON JOINT PROPERTIES OF HIGH MANGANESE STEELS USING TAGUCHI-BASED GRA APPROACH pp. 1-13

A. Sahoo, S. Tripathy and D.â K. Tripathy

EXPERIMENTAL STUDY AND MONITORING OF TEMPERATURE AND SURFACE ROUGHNESS AND MICRO-HARDNESS OF THE WHEEL–RAIL CONTACT IN THE DESERT REGION OF THE OUARGLA TRAMWAY pp. 1-14

Mourad Abdelkrim, Elhocine Chiba, Abderrahim Belloufi and Imane Rezgui

OXIDATION CHARACTERISTICS OF THERMAL-SPRAYED COBALT-BASED SUPERALLOY COATINGS: A REVIEW pp. 1-12

S. Suresh Kumar, M. Raviprakash, C. Durga Prasad, R. N. Chikkangoudar, Shrishail B. Sollapur, Yugesh A. Kharche and Gautam Jalba Narwade

PHOTOTHERMAL DEFLECTION ANALYSIS OF β-In2S3 THIN FILMS: THE EFFECT OF S/In MOLAR RATIOS pp. 1-12

S. Ismail, Y. Bchiri, I. Halidou, N. Bouguila, M. Kraini, N. Yacoubi, Carlos Vã Zquez Vã Zquez and S. Alaya

INVESTIGATION OF MICROSTRUCTURAL EVOLUTION AND MECHANICAL PROPERTIES OF SURFACE GRAPHITIZED AL-1100 ALLOY pp. 1-17

Baidehish Sahoo, Tanmoy Das and Jinu Paul

INVESTIGATION ON ENHANCED CONCRETE PERFORMANCE THROUGH THE INCORPORATION OF NANOMATERIALS AND NATURAL FIBERS pp. 1-8

R. Maguteeswaran, Lakshmi Keshav, A. Sagai Francis Britto and D. Dhavashankaran

MICRO-EDD OF INCONEL 800 USING ELECTROMAGNETIC FIELD pp. 1-21

P. Mukhopadhyay, D. Biswas, B. R. Sarkar, B. Doloi and B. Bhattacharyya

STRUCTURES, ELECTRONIC, AND MAGNETIC PROPERTIES OF TRANSITION METAL-INSERTED H2DBP CLUSTERS pp. 1-9

Zhi Li, Shu-Qi Yang, Jia-Hui Yin, Jia-Cong Li and Sedigheh Abbasi

EVOLUTION OF WEAR AND CORROSION RESISTANCE OF Bi ALLOY-LAMINATED Al/TiO2 COMPOSITE STRIPS FABRICATED VIA APB PROCESS pp. 1-9

H. Asadollahi Yazdi, Wade Ghribi, Manal A. Abbood, Ameer H. Al-Rubaye and Karrar Hatif Mohamed

Volume 31, issue 10, 2024

AN INVESTIGATION ON THE CAUSES OF CORROSION IN AISI 1009 STEEL PIPE OF THE FIRE LINE IN THE GAS REFINERY pp. 1-12

Robabeh Jafari, Hurieh Mohammadzadeh and Abolfazl Gheysvand

FABRICATION OF A NEW CERAMIC COATING BY ELECTROPHORETIC METHOD FOR GRAPHITE ELECTRODES AT HIGH TEMPERATURE pp. 1-9

Anna Raducanu, Alaa A. Omran, R. A‘LWAILY Enas, Abhinav Kumar and Ahmed Elawady

CORROSION, WEAR AND MECHANICAL PROPERTIES OF LAMINATED Al/TiC COMPOSITES pp. 1-9

Saeed Daneshmand, Mohammad Heydari Vini, Sayed Mohammad Reza Loghmanian and Ali Karimi Dizicheh

STUDY ON EPOXY RESIN/MULTI-WALLED CARBON NANOTUBES CONDUCTIVE COATING ON AZ31 MAGNESIUM ALLOY AFTER MICRO-ARC OXIDATION pp. 1-8

C. Zhang, C. Wang, B. Jiang and R. G. Song

EXPERIMENTAL INVESTIGATION ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF DSS2205 AND SS304L DISSIMILAR WELDMENTS pp. 1-8

M. Murugan, G. Selvakumar, T. Ramkumar and M. Selvakumar

STUDY ON THE IMPACT OF POST WELD HEAT TREATMENT ON TIG AND A-TIG INCONEL 617 WELDMENTS pp. 1-17

S.â Senthil Kumaar, Nanda Naik Korra, K. Devakumaran and K. Ganesh Kumar

LUBRICATION PROPERTIES OF MXenes AND THEIR COMPOSITES: A REVIEW pp. 1-15

Jiayuan Yan, Xiaoliang Zhang and Yanming Wang

MICRO-EDM OF TI–6AL–4V USING VARIOUS TOOL MATERIALS: MULTI-RESPONSE OPTIMIZATION AND SURFACE CHARACTERIZATION pp. 1-15

Manas Ranjan Pal, Kishore Debnath, Gorrepotu Surya Rao and Rabindra Narayan Mahapatra

COMPARATIVE THERMAL KINETIC ANALYSIS OF NICKEL HYDROXIDE NANOPARTICLES THROUGH CHEMICAL PRECIPITATION AND SOL–GEL ROUTES pp. 1-11

H. Mohamed Mohaideen, G. Sivabalan and B. Natarajan

Volume 31, issue 09, 2024

DENSITY FUNCTIONAL THEORY-BASED QUANTUM COMPUTATIONAL STRAIN ENGINEERING OF ELECTRONIC AND THERMOELECTRIC PROPERTIES OF AsXY (X=S, Se and Y=Cl, Br, I) MONOLAYER pp. 1-15

Fawad Khan, Iftikhar Ahmad, Bin Amin, Muhammad Ilyas, Fida Rehman and Mehwish Ali

AN EXPERIMENTAL INVESTIGATION OF INCLINED HOLES CREATED BY Nd:YAG LASER BEAM PERCUSSION DRILLING ON FRP-BASED MATERIALS UTILIZING OPAT METHODS pp. 1-15

Yadvendra Kumar Mishra, Sanjay Mishra and Ashutosh Yadav

SOLID PARTICLE AIRJET EROSION AND CORROSION BEHAVIOR OF AA6063 ALUMINUM ALLOY pp. 1-13

G.â S. Samy, M. Pethuraj, S. Thirumalai Kumaran and G. Kalusuraman

THE IMPACT OF SURFACE TREATMENT ON THE MECHANICAL PROPERTIES OF FLAX-BASED FIBER COMPOSITE pp. 1-13

Murugesan Palaniappan

THE CHALLENGING SCALP–ELECTRODE INTERFACE AND THE EVOLUTION OF MATERIALS AND ELECTRODE INTEGRATED ICTs FOR ELECTROENCEPHALOGRAPHY pp. 1-14

Lilian Celeste Alarcã“n-Segovia, Rosario Morel, Rubã‰n Spies and Ignacio Rintoul

CONTRIBUTION TO PRACTICAL ANALYSIS OF SURFACE ROUGHNESS MODELING DURING DRY HARD TURNING OF COLD WORK TOOL STEEL AISI D2 pp. 1-12

Youcef Abidi, Nacer Mokas and Djallel Kerdoun

EXPERIMENTAL INVESTIGATIONS ON THE ELECTROCHEMICAL MACHINING OF D3 DIE STEEL MATERIAL AND MULTI-OBJECTIVE PARAMETER OPTIMIZATION pp. 1-12

Abhinao Anand Singh, Rakesh Kumar Singh, Ashok Kumar Yadav, Abhijit Saha, Ashish Dewangan and Bhupender Singh

MODIFICATION OF POLYPYRROLE FILM WITH GOLD MICROPARTICLES FOR GLUCOSE OXIDATION pp. 1-8

Imene Chikouche, Charif Dehchar, Ahmed Zouaoui, Sophie Tingry, Fares Rezig and Bochra Bouhcida

EFFECT OF MICRO-TEXTURES AND CrAlSiN COATINGS ON THE FRICTION AND WEAR PROPERTIES OF 316L STAINLESS STEELS IN SEAWATER pp. 1-17

Runzhou Tian, Jianxin Deng, Aihua Liu, Mingyuan Wang, Kexin Ma and Junyan Wang

Volume 31, issue 08, 2024

SIMULATION AND EXPERIMENTAL RESEARCH STUDIES ON TEMPERATURE FIELD FOR THE PRODUCTION OF DIAMOND-COATED MILLING TOOLS BY HFCVD DEVICE WITH SEPARATED WORKTABLES pp. 1-10

Chuan Zhang, Ming Lu, Dongdong Liu and Fanghong Sun

EXAMINATION OF THE WEAR BEHAVIOR OF CU-BASED BRAKEÂ PADS USED IN HIGH-SPEED TRAINS AND PREDICTION THROUGH STATISTICAL AND NEURAL NETWORKÂ MODELS pp. 1-16

ÅžERAFETTÄ°N Ekä°ncä°, ASILTÃœRK Ä°lhan, AKKUÅž Harun and Akshin Mahammadzade

AN EXTENSIVE REVIEW ON THE ROLE OF METAL MATRIX NANOCOMPOSITES IN THE RECENT RESEARCH AREAS pp. 1-11

A. Arul Marcel Moshi, D. Ravindran and D. Venkatkumar

GREEN SYNTHESIS OF Fe/Ni/Cr OXIDE NANOPARTICLES USING COSTUS PICTUS PLANT EXTRACT: MICROSTRUCTURE AND BIOLOGICAL PROPERTIES pp. 1-11

Prakash Kumar, M. R. Ramesh, Mrityunjay Doddamani and Joghee Suresh

MICROSTRUCTURE AND EROSION CORROSION PROPERTY OF CrNi ALLOYED COATING ON CARBON STEEL pp. 1-9

Shouying Li and Zhaoqing Lin

PREPARATION AND MODIFICATION OF CALCIUM PHOSPHATE CONVERSION COATING pp. 1-9

Chi Ma, Zhaowei Su, Xuetian Li and Zhongcai Shao

INVESTIGATION OF SURFACE CHARACTERISTICS IN PRECISION HOLE MACHINING OF INCONEL-625 USING ABRASIVE AQUA JET DRILLING pp. 1-21

R. Vijaya Kumar, N. Srirangarajalu, M. Santhanakumar and R. Adalarasan

EFFECT OF DEPOSITION PARAMETER ON EXTERIOR MORPHOLOGY, STRUCTURAL AND OPTICAL CHARACTERISTICS OF CHEMICAL BATH-DEPOSITED ZINC OXIDE THIN FILMS pp. 1-8

Rahima Nasrin, M. D. Obaydul Haq, M. D. Mohiuddin and H. Akther

IMPROVEMENT OF FORMABILITY AND SURFACE FINISH OF CUPRO–NICKEL (70/30) ALLOY DURING SINGLE POINT INCREMENTAL FORMING PROCESS USING CHROME STEEL LASER ABLATED BALL pp. 1-12

M. Arun Prasad, C. Sathiya Narayanan, M. Varatharajulu and C. Pandivelan

Volume 31, issue 07, 2024

ANN MODELING AND OPTIMIZING THE DRILLING PROCESS PARAMETERS FOR AA5052-GLASS FIBER METAL LAMINATE USING GREY-FUZZY LOGIC APPROACH pp. 1-15

A. Arul Marcel Moshi, P. Hariharasakthisudhan, S. R. Sundara Bharathi and K. Logesh

INVESTIGATION OF ELECTROEROSION MACHINING PERFORMANCE OF METAL MATRIX COMPOSITE MATERIALS PRODUCED USING STIR AND INDIRECT SQUEEZE METHOD pp. 1-14

UÄžUR Abdullah, Engin Nas and Hasan Gã–kkaya

INFLUENCE OF ZnO, Al2O3, CeO2 NANOPARTICLE-ADDED JULIFLORA BIODIESEL HRF ON RCCI ENGINE’S PERFORMANCE pp. 1-14

Ramachandran Manivannan and Neelakrishnan Subramanyan

NUMERICAL INVESTIGATION OF THE DYNAMICS OF MAGNETIZED CASSON FLUID FLOW OVER A PERMEABLE WEDGE SUBJECT TO DISSIPATION AND THERMAL RADIATIONS pp. 1-10

B. Shankar Goud, Y. Dharmendar Reddy and Adnan

TRIBOLOGY INTERFACE OVER DIGITAL TECHNOLOGIES AND ENVISAGING TRIBOLOGY WITH PATENT LANDSCAPE — A QUEER REVIEW pp. 1-20

V. Rajakumareswaran, Narender Chinthamu, M. Murali and Balaji Devarajan

HYDROPHOBIC PHOTORESPONSIVE AZOBENZENE-CONTAINING MATERIALS PREPARED BY CLICK REACTION pp. 1-12

Lu Qiu, Junyu Zheng, Xinyi Yu, Xiaoqian Han and Nong Wang

ENHANCING MILLING PERFORMANCE OF 6061 ALUMINUM ALLOY WITH NANOCUTTING FLUID AND MQL pp. 1-12

Nihat Tosun, Sleman Yahya Rasul, Aybars Mahmat and Gul Tosun

N2O ADSORPTION OVER FLAT AND DEFECTIVE Cu (110) SURFACES: PURE DFT AND DFT+U STUDIES INCLUDING vdW FORCES pp. 1-23

G. M. Moussounda Mba, C. C. Boungou, G. B. Bouka-Pivoteau, M. N’DOLLO, P. S. Moussounda and T. Dintzer

EXPERIMENTAL INVESTIGATION AND OPTIMIZATION OF WIRE EDM PROCESS TO CREATE DIFFERENT GEOMETRICAL PROFILES IN METAL MATRIX COMPOSITES pp. 1-26

Dhirendra Pratap Singh and Sanjay Mishra

Volume 31, issue 06, 2024

SYNTHESIS AND CHARACTERIZATION OF Al-DOPED ZnO THIN FILMS AS ANTI-REFLECTION COATINGS FOR SOLAR CELL APPLICATIONS pp. 1-7

H. I. Abdulgafour, Faten Sh. Zainulabdeen, Ghada S. Karam, Hayim Ch. Magid, Aus A. Najim and Faez M. Hassan

SLURRY EROSION PERFORMANCE OF COLD SPRAYED WC-12Co COMPOSITE COATINGS pp. 1-11

Harvinder Singh, Manoj Kumar and Rajdeep Singh

EXPERIMENTAL ANALYSIS OF WIRE-EDM ON SUB-COOLED LOW-CARBON TOOL STEEL USING HYBRID MARCOS METHOD AND HONEY BADGER ALGORITHM pp. 1-13

Manisha Priyadarshini, Swastik Pradhan, Abhishek Barua, Ajit Behera and Sumit Kanchan

SURFACE CHARACTERISTICS INFLUENCED BY LASER TEXTURING PARAMETERS ON BIOMEDICAL-GRADE AISI 316LVM STAINLESS STEEL pp. 1-16

ÅžEFIKA Kasman, I. Can Uã‡ar and Sertan Ozan

INVESTIGATING MAGNETIC, DIELECTRIC, OPTIC AND MORPHOLOGIC PROPERTIES OF NANO-NICKEL OXIDE-DOPED NdFeO3 pp. 1-16

Kubra Zenkin, Sefa Durmus and Ahmet Demir

GJO-MLP: A NOVEL METHOD FOR HYBRID METAHEURISTICS MULTI-LAYER PERCEPTRON AND A NEW APPROACH FOR PREDICTION OF WEAR LOSS OF AZ91D MAGNESIUM ALLOY WORN AT DRY, OIL, AND h-BN NANOADDITIVE OIL pp. 1-16

Osman Altay and Turan Gurgenc

FIRST-PRINCIPLES COMPUTATIONAL INSIGHTS INTO SILICON-BASED ANODE MATERIALS: RECENT PROGRESS AND PERSPECTIVES pp. 1-28

Jun Song, Mingjie Jiang, Huijie Li, Chi Wan, Xiaowan Chu, Qi Zhang, Yuhui Chen, Xuehong Wu, Xueqing Zhang, Juanfang Liu and Sailin Liu

EFFECT OF MACHINABILITY OF GNP–GFRP COMPOSITES ON TENSILE STRENGTH AND FATIGUE BEHAVIOR pp. 1-12

Tolga Topkaya, YAHYA HIÅžMAN Çelä°k and Erol Kilickap

ANALYSIS ON POWER CONSUMPTION FOR LIFE CYCLE SUSTAINABILITY ASSESSMENT IN HARD TURNING OF AISI 4140 STEEL USING SPPP—AlTiSiN-COATED CARBIDE TOOL UNDER VARIOUS CUTTING ENVIRONMENTS pp. 1-26

Soumikh Roy, Arupam Pradhan, Smita Padhan, Anshuman Das, Sudhansu Ranjan Das and Debabrata Dhupal

Volume 31, issue 05, 2024

PROCESS OPTIMIZATION OF ELECTRO-SPARK DEPOSITION USING LASER POWDER BED FUSION PROCESSED AlSi10Mg TOOL ELECTRODE THROUGH BOX-BEHNKEN DESIGN pp. 1-11

R. Rajeshshyam, R. Raj Mohan, R. Venkatraman and P. Vivek Kumar

EFFECT OF ARB PROCESS ON WEAR RESISTANCE, PLAN STRESS FRACTURE TOUGHNESS AND FORMING LIMIT DIAGRAMS OF LAMINATED Al/SiC COMPOSITES pp. 1-13

Eyhab Ali, Abdul Nasser Mahmood Fatah, Ahmed Alawadi, Muataz S. Alhassan and F. Naderian

PREDICTIVE MODELING AND OPTIMIZATION OF CUTTING PARAMETERS IN HIGH SPEED HARDENED TURNING OF AISI D2 STEEL USING RSM, ANN AND DESIRABILITY FUNCTION pp. 1-16

Hamama Mebrek, Salah Mansouri, Youssef Touggui, Hacene Ameddah, Mohamed Athmane Yallese and Hadj Mohamed Benia

CATHODIC PLASMA ELECTROLYTIC DEPOSITION (CPED) TECHNIQUE FOR SURFACE STRENGTHENING OF TITANIUM AND TITANIUM ALLOYS: A MINI REVIEW pp. 1-15

Xiaokai Li, Naiming Lin, Qunfeng Zeng, Hongbing Jia, Meisam Nouri and Xin Wang

O-PHTHALIC ANHYDRIDE AS AN EXCELLENT VAPOR PHASE CORROSION INHIBITOR FOR Mg ALLOY AZ31B UNDER SIMULATED OCEAN-ATMOSPHERE ENVIRONMENT pp. 1-15

Jingbao Wang, Mohammad Tabish and Jingmao Zhao

FURTHER IMPROVING THE MECHANICAL AND HIGH-TEMPERATURE TRIBOLOGICAL PROPERTIES OF SILICON-DOPED DIAMOND-LIKE CARBON FILM BY TUNGSTEN INCORPORATION pp. 1-12

Weijie Yu, Weijiu Huang, Junjun Wang, Yongyao Su and Xiaohong Gong

EXPERIMENTAL INVESTIGATION AND PARAMETRIC OPTIMIZATION OF ELECTRO DISCHARGE MACHINING FOR TI-5553 ALLOY USING GREY RELATION ANALYSIS COUPLED WITH TAGUCHI METHOD pp. 1-12

Rahul, Rajan Choudhary, Pritam Debnath and Pradeep Kumar

AN INVESTIGATION ON MICROSTRUCTURES, MECHANICAL AND WEAR BEHAVIOR OF LASER-CLADDED INCONEL 625 AND NIMONIC 90 OVER NIMONIC 90 SUBSTRATE pp. 1-12

T. Prabakaran, D. Raj Kumar, K. Vijayan, K. Madhan Muthu Ganesh and P. Thamizhvalavan

STRUCTURES, ELECTRONIC PROPERTIES AND DIPOLE MAGNITUDES OF TMWn−1O3n AND TM2Wn−2O3n (TM = Ni, Pd AND Pt; n=2−6) CLUSTERS pp. 1-9

Zhi Li and Zi-Hao Wu

Volume 31, issue 04, 2024

INVESTIGATION OF CORROSION BEHAVIOR OF AISI 304 AND AISI 316L STAINLESS STEELS COATED WITH FeAL AND NiAL INTERMETALLICS USING ELECTRO-SPARK DEPOSITION METHOD pp. 1-19

Erol Baysan and Yusuf Kayali

FLUID CHARACTERISTICS AND POLISHING EXPERIMENT OF INCLINED HOLE ARRAY USING ABRASIVE WATER FLOW pp. 1-12

Lijun Xiao, Yangyang Tang, Zhuang Liu, Changshui Gao and Chao Sheng

THERMAL SHOCK BEHAVIOR OF LANTHANUM ZIRCONATE-BASED THERMAL BARRIER COATINGS pp. 1-9

KARABAÅž Muhammet and Emre Bal

TRANSITION METAL NANOPARTICLES AS PROMISING ANTIMICROBIAL AGENTS pp. 1-23

Vinod Kumar Vashistha, Renu Bala, Dipak Kumar Das, Ankit Mittal and Rajasekhar Vsr Pullabhotla

INFLUENCE OF ARGON IRRADIATION ON ELECTRICAL PROPERTIES OF PVA/NaI POLYMER COMPOSITES pp. 1-8

A. Atta, B. M. Alotaibi, S. A. Waly, A. M. Abdel Reheem and Haifa A. Al-Yousef

MICROSTRUCTURAL EVOLUTION AND ANTI-CORROSION CHARACTERISTICS OF AS-CAST AND LPBF PRINTED INCONEL PLATES IN SEAWATER ENVIRONMENT pp. 1-15

N. Jeyaprakash, Che-Hua Yang, Sundara Subramanian Karuppasamy and N. Radhika

MECHANICAL AND TRIBOLOGY BEHAVIOR OF HARD-FACED INCONEL 718 ON STAINLESS STEEL 321 pp. 1-13

A. Karpagaraj, R. Sarala, S. Manivannan, S. Gejendhiran, S. Babu and Ragupathy Dhanusuraman

MAGNETOHYDRODYNAMIC TERNARY HYBRID NANOFLUID FLOW OVER A STRETCHING SURFACE SUBJECT TO THERMAL CONVECTIVE AND ZERO MASS FLUX CONDITIONS pp. 1-22

Syed Arshad Abas, Hakeem Ullah, Saeed Islam and Mehreen Fiza

THE EFFECT OF BATH TEMPERATURE ON THE STRUCTURE AND TRIBOLOGICAL BEHAVIOR OF ELECTROLESS NI-B–MO COATINGS OBTAINED FROM STABILIZER-FREE BATH pp. 1-22

Rohit Agrawal and Arkadeb Mukhopadhyay

Volume 31, issue 03, 2024

RECENT PROGRESS ON MAGNESIUM MATRIX SYNTACTIC FOAMS: HOLLOW FILLER SELECTION, PROCESSING TECHNIQUES, AND COMMERCIAL APPLICATIONS pp. 1-20

Raja Thiyagarajan and M. Senthil Kumar

INFLUENCE OF MECHANICAL AND THE CORROSION CHARACTERISTICS ON THE SURFACE OF MAGNESIUM HYBRID NANOCOMPOSITES REINFORCED WITH HAp AND rGO AS BIODEGRADABLE IMPLANTS pp. 1-20

Venkata Satya Prasad Somayajula, Shashi Bhushan Prasad and Subhash Singh

BRAKE SURFACE TEXTURE EXPLORATION AND TEMPERATURE CONTROL DURING BRAKING IN THE NEW KNEE IMPACT TEST pp. 1-12

Zhiming Wang, Jizong Wei, Lixiao Wu, Mengfan He, Aristide Djoulde and Mei Liu

EFFECT OF Fe CONTENT ON THE STRUCTURAL AND MAGNETIC PROPERTIES OF TERNARY (Ni60Co40)100−xFex NANOMATERIALS SYNTHESIZED BY HYDROTHERMAL ROUTE pp. 1-9

Y. Gaci, A. Guittoum, M. Hemmous, D. Martã Nez-Blanco, P. Gorria, J. A. Blanco and T. Aouaroun

INVESTIGATION OF CORRELATION BETWEEN PROCESS PARAMETERS AND VIBRATION WITH USE OF WASTE CBN INSERTS IN DEEP ROLLING pp. 1-17

Oktay Adiyaman

PREDICTION OF SURFACE ROUGHNESS IN WIRE CUT ELECTRIC DISCHARGE MACHINING OF AL-FE-SI ALLOY COMPOSITES USING TAGUCHI TECHNIQUE AND REGRESSION ANALYSIS pp. 1-11

K. Senthamarai, S. Selvakumar, Sathish Kannan and S. V. Alagarsamy

ELECTROMAGNETIC PROPERTIES, FORMING LIMIT DIAGRAMS AND FRACTURE TOUGHNESS OF LAMINATED AL/FE2O3 COMPOSITES pp. 1-13

Aldriasawi Salman Khayoon, Nihayat Hussein Ameen, Kamya Pithode and Stacy McMahon

EFFECTS OF ALLOYING ELEMENTS ON α-FE(100)/CR(100) INTERFACE pp. 1-10

Jing Zhang, Shikun Zhang, Ying Sun and Lifeng Zhang

CHARACTERIZATION OF CORROSION BEHAVIOR OF INCONEL 617 WELDED JOINTS USING CMT-GMAW MULTI-CONTROL WELDING pp. 1-10

G. Pramod Kumar, K. R. Balasubramanian, Muralimohan Cheepu and Ravi Kumar Kottala

Volume 31, issue 02, 2024

ELECTRICAL PROPERTIES OF ZnO(x)–Co3O4(1−x) (x = 0.7, 0.5, 0.3) OXIDE THIN FILMS VIA FOUR POINT PROBE DEVICE: SUBSTRATE TEMPERATURE EFFECT ON THE ELECTRICAL PROPERTIES pp. 1-9

K. M. E. Boureguig, H. Tabet-Derraz and M. A. Benali

A REVIEW ON THE INFLUENCE OF COOLING APPLICATIONS IN FRICTION STIR WELDING PROCESS pp. 1-23

A. Mystica, V. S. Senthil Kumar and C. Rathinasuriyan

GENERATION OF EFFUSION HOLES ON ULTRA-HIGH TEMPERATURE ALLOY BY MICRO ELECTRO-DISCHARGE MACHINING PROCESS pp. 1-23

Debabrata Dhupal, Debasish Panigrahi, Sweta Rout, Rajesh Kumar Bhuyan, Soumyaranjan Nayak, Pankaj Charan Jena and Sudhansu Ranjan Das

PREPARATION AND PHOTOCATALYTIC PERFORMANCE OF AG3PO4/MOS2 COMPOSITE PHOTOCATALYST pp. 1-8

Ya Gao, Zezhong Xu, Yuhui Hu, Chengliang Han and Lingyun Zhang

EFFECTS OF VIBRATION CONDITIONS ON MACHINABILITY OF AISI 52100 BEARING STEEL pp. 1-13

Salih Agar, Nihat Tosun and Aybars Mahmat

ADSORPTION OF PB2+ IN WATER BY ZR-CONTAINING SILICA RESIDUE AND ITS MECHANISM pp. 1-13

Wanting Chen, Yuan Tian, Xuan Wang, Ruixin Ma, Hao Ding, Yu Tu and Han Zhang

MICROSTRUCTURE AND PROPERTIES OF LASER CLADDED TiNiCoCrVSi HIGH ENTROPY ALLOY COATING pp. 1-10

Hongxia Zhang, Jingjie Dai, Caixia Sun and Shouying Li

ENHANCING MECHANICAL PROPERTIES AND MICROSTRUCTURE ON MODIFIED SURFACE AL–MG/CR3C2 BY FRICTION STIR PROCESSING pp. 1-14

C. Chanakyan and S. V. Alagarsamy

MACHINABILITY ASPECTS OF NON-TEXTURED AND MICRO-TEXTURED CUTTING INSERTS IN TURNING OF TITANIUM Gr 2 pp. 1-14

Rahul Sharma, Swastik Pradhan and Ravi Nathuram Bathe

Volume 31, issue 01, 2024

MICROSTRUCTURAL ANALYSIS AND MECHANICAL PROPERTIES OF THREE-LAYERED STACK OF FSAM AA7075-CU ALLOYS pp. 1-8

M. Nallusamy, M. Suriyaprakash, K. Kiran and M. Jayachitra

EFFECT OF BURNING BIO-MASS FUEL ON THE CORROSION PERFORMANCE OF STEELS IN THE 34.5MW BOILER pp. 1-12

Binu Kumar Bhagria, Simranjit Singh Sidhu, Lalit Ahuja and Deepa Mudgal

VIBRATION-ASSISTED TURNING SIMULATION WITH TEXTURED TOOLS: A NUMERICAL INVESTIGATION pp. 1-18

Rima Singha Roy and Kalipada Maity

HEXAGONAL HONEYCOMB PL-GaN NANOSHEET AS ADSORBENT SURFACE FOR GAS MOLECULES SENSING: A QUANTUM CHEMICAL STUDY pp. 1-14

Fatemeh Mollaamin and Majid Monajjemi

A BRIEF REVIEW OF THE EFFECT OF PRECURSOR CONCENTRATIONS ON THE PHYSICAL CHARACTERISTICS OF LOW-COST KESTERITES FOR PHOTOVOLTAIC APPLICATIONS pp. 1-15

C. V. Akshaya, E. Parvathi, N. Dilraj, G. Arjun and N. K. Deepak

FIRST-PRINCIPLES STUDY OF THE LATTICE THERMAL CONDUCTIVITY OF MoSi2P4 AND WSi2P4 MONOLAYERS pp. 1-7

Yuhang Wang, Wei Ding and Yifeng Tao

NANOMATERIALS AND QUANTUM DOTS FOR ELECTROCHEMICAL SENSING OF NITRO-AROMATICS-BASED EXPLOSIVES: A SHORT REVIEW pp. 1-13

Sandip Paul Choudhury

A TAGUCHI-TOPSIS HYBRID TECHNIQUE TO ENHANCE THE FRETTING WEAR CHARACTERISTICS FOR SiC AND SILICA-ENRICHED BLA-REINFORCED AZ91D Mg ALLOY-BASED MMCs pp. 1-16

Biswajeet Nayak and Thingujam Jackson Singh

EVALUATION OF THE MECHANICAL PROPERTIES AND MICROSTRUCTURE OF A-TIG AND TIG WELDMENTS OF INCONEL 617 pp. 1-16

S. Senthil Kumaar, Nanda Naik Korra, K. Devakumaran and K. Ganesh Kumar