Impact of Instant Controlled Pressure Drop (DIC) Treatment on Drying Kinetics and Caffeine Extraction from Green Coffee Beans

I. Kamal, A. Gelicus and K. Allaf

Journal of Food Research, 2012, vol. 1, issue 1

Abstract: The present work is directed towards the impacts of Détente InstantanéeContrôléeDIC (French, for instant controlled pressure-drop) in terms of decaffeination and drying of Ethiopian green coffee beans (GCBs).DICconsisted in subjecting the product to a high-pressure saturated steam during some seconds and ended with an abrupt pressure drop towards a vacuum. A conventional aqueous extraction and a hot air-drying took place after DIC treatment. Inthis study, Response Surface Method (RSM) was used withDIC saturated steam pressure P, thermal treatment time t, and initial moisture content W asthe independent variables. Both direct DICextract recovered from the vacuum tank and the aqueous extracts wereanalyzed and quantified using the reversed phase-HPLC. With decaffeination ratiosas dependent variables, P and Wwere the most significant operating parameters; whilet was much weaker.Total decaffeination ratio could reach 99.5% after DIC treatment at specificconditions of W=11.00% db, P=0.1 MPa, and t=35swhile it was only 58% when achieved with untreated raw material. The effective diffusivity and the starting accessibility were calculated from the diffusion/surface interaction kinetic model of hotair drying after DIC treatment. They dramatically increased with P and t while W had a weak impact.Thus, at the optimized DICconditions, and increased from 0.33 to 12.60 10-10m² s-1and from 0.75 to 11.53 g/100 g db, respectively. Drying time needed to reach 5% db became 60 min instead of 528 min for untreated raw material. RSM analysis showed that the DIC saturated steam pressure P and the initial moisture content W were the most significant variables both affecting the decaffeination ratio; the impact of the total thermal processing time t was much weaker. Total decaffeination ratio could reach 99.5% after DIC treatment at specific conditions of W=11.00% db, P=0.1 MPa, and t=35 s while it was only 58% when achieved with untreated raw material. Using diffusion/surface interaction model of hot-air drying kinetics just after DIC treatment, we could observe that DIC expansion dramatically improved the drying kinetic parameters, with P and t as the most significant DIC operating parameters while the impact of W was much weaker. Thus, the optimized DIC treatment allowed the effective diffusivity and the starting accessibility to increase from 0.33 10-10 m² s-1 and 0.75 g/100 g db to 12.60 10-10 m² s-1 and 11.53 g/100 g db, respectively. Drying time needed to reach 5% db became 60 min instead of 528 min for untreated raw material.

Keywords: Research; and; Development/Tech; Change/Emerging; Technologies (search for similar items in EconPapers)
Date: 2012
References: Add references at CitEc
Citations:

Downloads: (external link)
https://ageconsearch.umn.edu/record/404936/files/12665-45342-1-PB.pdf (application/pdf)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:ags:aesjfr:404936

Access Statistics for this article

More articles in Journal of Food Research from Canadian Center of Science and Education
Bibliographic data for series maintained by AgEcon Search ().