Journal of Mechanical, Civil and Industrial Engineering

2020 - 2026

From Al-Kindi Center for Research and Development
Bibliographic data for series maintained by Al-Kindi Center for Research and Development ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 7, issue 6, 2026

Study on Quality and Elemental Composition of Gazestan Coal Mine, Takhar Province, Afghanistan pp. 01-13

Abdulhaq Froogh, Mohammadullah Ahmadzai and Wazir Mohammad Amiri

Thermal spalling in NSC: experimental studies and findings pp. 14-28

Sayed Sulaiman Hamidi, Abdul Bais Parsazadaz, Sayed Tamim Rahimi and Faramarz Moodi

Volume 7, issue 5, 2026

Comparative Analysis of Aerodynamic Characteristics of NACA4412 and NACA23012 Airfoils at High Reynolds Number pp. 01-08

Gonghang Lin

Characterization and Engineering Evaluation of Tholeiitic to Calc-Alkaline Rock Assemblages in Achin District, Nangarhar Province, Eastern Afghanistan pp. 09-19

Zahidullah Hemat, Khairuddin Rasikh, Lal Omar Momand, Fareedullah Tasal and Hamid Zaheer

Construction Organization Optimization for Sustainable Green Buildings: The Roles of Energy Efficiency and Environmental Well-Being pp. 20-41

Yiyu Wu

An Assessment of Schedule Risk Management Strategies in Afghanistan Construction Projects pp. 42-66

Sameer Usmani, Mohammad Naser Amin and Mohammad Alem Wardak

A Risk-Based Safety Resilience Framework for Brownfield Projects pp. 67-89

Shajahan Salam

Investigation of the Effects of High-Grade Metamorphism on the Quality of Badakhshan-Sarsang Lapis Lazuli pp. 90-96

Abdul Rab Bahrampoor and Mustafa Ormal

Volume 7, issue 4, 2026

AI-Driven Digital Twin Framework for Real-Time Optimization of Smart Manufacturing Systems in Industry 5.0 pp. 01-04

Venkata Naga Kishore Thota

Assessment of Pedestrian Flow Characteristics on Selected Urban Walkways in Khulna Metropolitan Area, Bangladesh pp. 05-12

Md. Mahmudun Nabi and Md. Izharul Haque Azad

Mineralogical investigation of Chumbalak Pegmatites in Eastern Afghanistan Kunar province Chapadara pp. 13-22

Noorzai Safiullah, Bilalzai Haseebullah, Safi Riaz ul Haq and Zahidullah Hemat

Financial Performance and Strategic Management of VINCI and Bouygues: A Comparative Ratio Analysis (2020–2024) pp. 23-36

Sameer Usmani and Abdul Tawab Alim

Translating Passenger-Perceived Safety Quality into Operational Safety Priorities: Study of an Indonesian Urban Bus Service pp. 37-48

Nabila Hafisha Rizka, Rhaptyalyani Herno Della and Melawaty Agustien

Volume 7, issue 3, 2026

Blockchain-Integrated AI for Transparent and Adaptive Supply Networks pp. 01-05

Phani Kumar Gutta and Subba Rao Katragadda

Additive Manufacturing of Lightweight, Fire-Resistant Alloys for Automotive and Aerospace Applications pp. 06-16

Md Arman Hossain, Shipon Chandra Barman and S M Tarikul Islam

AI-Integrated Structural Optimization Framework for Lightweight Heavy Fabrication Systems in Smart Manufacturing Environments pp. 17-24

Venkata Naga Kishore Thota

Machine Learning-Based Prediction of Porosity Formation in Laser Powder Bed Fusion of Mechanical Components pp. 25-37

Matthew J. Reynolds, Emily R. Carter, Daniel T. Mitchell and Lauren M. Brooks

Volume 7, issue 2, 2026

Gendered Patterns of Public Space Use: An Architectural Analysis of U.S. Cities pp. 01-07

Joynal Abed

Utilizing LLM models for advanced automation, manufacturing operations pp. 08-14

Subba Rao Katragadda

Volume 7, issue 1, 2026

Human-Robot Collaboration in Mechatronic Systems: Towards Ergonomic and Safe Mechanical Design pp. 01-05

Subodh Thallada

Study Experimental and Numerical of Cross-Laminated Bamboo with Epoxy Adhesive pp. 06-15

Muh. Nurul Islam Parhan

Industrial Power Load Forecasting for Grid Operation Using a CNN-Transformer-BiLSTM Model pp. 16-30

Remon Das, Md Abdul Ahad Juel and Md. Raisul Islam

Volume 6, issue 5, 2025

Analysis of Hydrological Station Rationalization in Dompu Regency pp. 01-10

Yayak Fitra Dikatanaya, Heri Sulistiyono and I. Wayan Yasa

Optimization of Irrigation Water Allocation at The Meninting Dam to Substitute The Water Discharge to The Jangkok - Babak HLD pp. 11-18

Zainul Arifin, Heri Sulistiyono2 and Yusron Saadi

Sensitivity Analysis of Mock and NRECA Method Parameters on Water Availability in the Jangkok Hulu Watershed pp. 19-33

Baiq Virginia Ayunni Gandhis, Ery Setiawan and Hartana Hartana

Predictive Maintenance in Smart Manufacturing: An IoT-Integrated Framework pp. 34-39

Rohan Rajiv Joshi, Shreyash Ruikar and Sairaj Prakash Desai

Mechanical Properties of Lightweight Concrete Incorporating Perlite, LECA, and Supplementary Materials pp. 40-51

Ali Akbar Akbari, Atiqullah Tawakoli, Abdul Tawab Alim, Mohammad Arif Koshyar and Mohammad Atif Koshyar

An Analysis of Erosion Hazard Levels Using the USLE Method in the Mandalika Special Economic Zone pp. 52-61

Ni Putu Ari Listuayu, Ery Setiawan, M. Bagus Budianto and Hartana Hartana

A Spatial Sensitivity Analysis of Flood Control Capability in the Mandalika Special Economic Zone, Central Lombok Regency, using a GIS-Based Multi-Attribute Decision Making Approach pp. 62-79

Wanda Iqro Fatra, Ery Setiawan and I Ketut Budastra

Prediction of Fatigue Life of Asphalt Layers in Desert Environments Using Neural Networks and SHAP Analysis: Al-Kufrh Case Study pp. 80-89

Mohammed Salih Huwaysh and Mousa Muhammed Karbaj

Volume 6, issue 4, 2025

Safety Analysis of Construction Projects in Kabul Using the FMEA Method with a Worker Behavioral–Psychological Approach pp. 01-16

Mohammad Ali Qazi Zada, Mohammad Arif Koshyar and Ahmad Jaweed Tafakur

Automated Pick & Stow Robot System for Sorting in an e-Commerce Warehouse pp. 17-32

Maryadi Tirtana Siregar, Amrin Rapi and Syarif Hidayat

Volume 6, issue 3, 2025

Quantity Take-Off Strategies: Reducing Errors in Roadway Construction Estimation pp. 01-09

Hemraj Parate, Kishore Bandela and Paniteja Madala

A look at the oil and gas industry of Afghanistan pp. 10-15

Muhammadi Tughyan and Rahimullah Jalali

Study and Evaluation of the Extraction of Northern Oil Fields on Income Generation in the Afghan Economy pp. 16-22

Muhammadi Tughyan and Saifullah Inanch

Exploring the Development of Triboelectronic Nanogenerators in Wearable Devices pp. 23-33

Chengwei Zhang

Innovative Simulation Model for Analyzing the Effects of Supplier Disruptions on Supply Chain Distributors pp. 34-51

Milad Javadi, Zahra Raeisi and Azin Bohlool

Particle Swarm Optimized Robust Backstepping Control of a Quadrotor Unmanned Aerial Vehicle under Pink Noise pp. 52-61

Mehmet Karahan

Voltage and Electrical Safety pp. 62-71

Bashir Ahmad Karimi and Wahidullah Niazi

Rethinking Sprawl: How High-Density, Low-Rise Housing Can Reshape Small Cities like Baton Rouge pp. 72-83

Sadia Sharmeen Shatyi

Sustainable Building Materials in the Traditional Architecture of Nuristan Province, Afghanistan: A Case Study of Wood, Stone, and Indigenous Materials in Parun and Wama Districts pp. 72-77

Naweed Ahmad Hashemi, Ahmad Fawad Omar, Rahmanuddin Rahmani, Omarsharif Osmani and Zabihullah Rustami

Re-Imagining the Spaces In-Between: Design Interventions to Transform Urban Voids in Downtown Dayton into Active, Breathing Areas pp. 84-97

Joynal Abed

Volume 6, issue 2, 2025

Machine Learning-Based Drought Classification Using Meteorological Data: Toward Smarter Environmental Models for Site Exploration pp. 01-08

Sina Saghaei, Seyedehzahra Shafa and Paniz Farahani

Investigating the Role of Graphic Geometry in Enhancing the Spatial Ability of Engineering Students pp. 09-17

Mohammed Erfan Arif

Application and Development of Artificial Intelligence in Optical Imaging pp. 18-22

Jingcheng Shi

Triboelectric Nanogenerators for Sustainable Environmental Remediation: A Comprehensive Review pp. 23-32

Kaile Hu

Effective Factors in Applying Sustainable Design to Architectural Projects: Shiraz Case pp. 33-50

Seyedehzahra Shafa

Validation of the solder paste imprinting process: KOKI S3X58-M650-7 based on an experiment conducted with the use of the DoE methodology. experiment conducted at Universal Scientific Industrial Poland Sp. z o.o pp. 51-62

Katarzyna Dymek and Piotr Hebel

Investigating the use of Axonometric Projection in Drawing Maps and its Effect on Students' Spatial Ability: A Case Study of Isometrics pp. 63-75

Mohammed Erfan Arif

Investigating the Drawbacks of Urban Trash in Taloqan City pp. 76-84

Ahmad Shoaib Rahimi

Case Accuracy for Offshore Assets Using the Nkansah Reconciliation Model: Technical Report & Case Study pp. 85-94

Esi Mensah

Volume 6, issue 1, 2025

Investigation of Sarodagh Valley Chromite, its Mineralogy and Geochemistry pp. 01-10

Hamid Zaheer, Atiqullah Miakhil, Nasim Zaland and Liaqat Shirzad

The Role of Sludge Dewatering Technologies in Modern Wastewater Management pp. 11-18

Paniteja Madala

Remaining Useful Life Prediction of Turbofan Engines Using CNN-GRU: A Comparative Study on C-MAPSS Dataset pp. 19-27

Adryan Fitra Azyus, Sastra Kusuma Wijaya and Budhy Kurniawan