EconPapers    
Economics at your fingertips  
 

Design of a prototype press for in-field pressing of sweet sorghum and sweet pearl millet biomass

Nicholas Lefebvre, Mohamed Khelifi and Yannick De Ladurantaye
Additional contact information
Nicholas Lefebvre: Université Laval, Quebec, Canada
Mohamed Khelifi: Université Laval, Quebec, Canada
Yannick De Ladurantaye: Université Laval, Quebec, Canada

Journal of Applied and Physical Sciences, 2015, vol. 1, issue 1, 29-32

Abstract: With the growing demand for biofuels, ethanol production is rising. Alternative energy crops have been investigated to get better yield from little resources. Sweet sorghum and sweet pearl millet are promising energy crops. However, the sugar is mainly located in the juice rather than in the grain. Usually, the biomass of these crops is carried to a plant where it is handled like that of sugarcane. With the rise of the transportation fees, carrying the biomass leaves less profit to the producer and causes the loss of organic matter or forage. The objective of the research study was to design, build, and test an infield mobile juice extraction prototype press. This allows pressing on-the-run the biomass harvested with a forage harvester. The pressed material (bagasse) is dumped on the ground while the juice is collected. The prototype press was built in the summer of 2014 and preliminary tests were carried out in the field. Obtained results are promising as 57% of the total water was extracted. More tests will be carried out to optimize the prototype press

Keywords: Sweet sorghum; Sweet pearl millet; Prototype press; Juice extraction (search for similar items in EconPapers)
Date: 2015
References: View complete reference list from CitEc
Citations: View citations in EconPapers (1)

Downloads: (external link)
https://tafpublications.com/platform/Articles/full-japs1.1.5.php (application/pdf)
https://tafpublications.com/gip_content/paper/japs-1.1.5.pdf (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:apb:japsss:2015:p:29-32

DOI: 10.20474/japs-1.1.5

Access Statistics for this article

Journal of Applied and Physical Sciences is currently edited by Prof. Vakhrushev Alexander

More articles in Journal of Applied and Physical Sciences from Prof. Vakhrushev Alexander Calle Alarcon 66, Sant Adrian De Besos 08930, Barcelona Spain.
Bibliographic data for series maintained by Prof. Vakhrushev Alexander ().

 
Page updated 2025-03-19
Handle: RePEc:apb:japsss:2015:p:29-32