Journal of Advances in Technology and Engineering Research

2015 - 2020

Current editor(s): A/Professor Akbar A. Khatibi

From A/Professor Akbar A. Khatibi
Calle Alarcon 66, Sant Adrian De Besos 08930, Barcelona Spain.
Bibliographic data for series maintained by A/Professor Akbar A. Khatibi ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 6, issue 2, 2020

The bus arrival time prediction using LSTM neural network and location analysis pp. 46-57

Yerkezhan Seitbekova, Bakhytzhan Assilbekov, Iskander Beisembetov and Alibek Kuljabekov

A Conceptual review on different data clustering algorithms and a proposed insight into their applicability in the context of Covid-19 pp. 58-68

Fariha Al Ferdous

Volume 6, issue 1, 2020

Analysis of robotics industrial manufacture & promotion of artificial intelligence pp. 01-07

Aneel Ahmed, Hamza Karamatullah and Asil Budhwani

Effect of temperature dependent viscosity on biomagnetic fluid flow and heat transfer over a nonlinear stretching sheet pp. 08-21

Md. Jahangir Alam and Md. Ghulam Murtaza

Development of a holistic approach framework for e-learning adoption decision-making in Saudi Arabian universities pp. 22-36

Asmaa Hatem Rashid

Attackdet: Combining web data parsing and real-time analysis with machine learning pp. 37-45

Zeydin Pala and Musa Sana

Volume 5, issue 6, 2019

A case study in the textile industry for the reduction of cost of quality pp. 219-230

Muhammad Rehan Yasin, M Nasir Bashir and Syed Asad Ali Zaidi

Volume 5, issue 5, 2019

Effect of Shielded Metal Arc Welding (SMAW) parameters on mechanical properties of low-carbon, mild and stainless-steel welded joints: A review pp. 191-198

S. Farrukh Haider, M. M. Quazi, Jahanzeb Bhatt, M Nasir Bashir and Imran Ali

Video forgery detection based-on passive (blind) approach pp. 199-206

Noraida Haji Ali and Fadilah Harun

Automation of water meter billing process based on digital image processing approach pp. 207-218

Sudipto Chaki, Dipu Akter Shila and Nafsin Jahan

Personalized spoiler detection in tweets by using support vector machine pp. 219-226

Isao Sasano, Kei Morisawa and Yutaka Hirakawa

Volume 5, issue 4, 2019

Event-based networked control scheme for two-wheeled systems pp. 151-158

Magdi S. Mahmoud and Bilal J. Karaki

The innovation of 5G in on-the-go FMCG’s food sector: Manufacturing’s sustained competitive advantage pp. 159-173

Chelsie Farah Utami

Applying data envelopment analysis to evaluate of operational efficiency of the container terminals pp. 174-179

Shih-Liang Chao, Hsin-Cheng Kang and Hsin-Yi Wei Chen

Ultra-fast observation orbit refinement model established on DOP value for GNSS system pp. 180-190

Dib Djamel Eddine, Djebbouri Mohamed and Taleb Ahmed Abddelmalik Chen

Volume 5, issue 3, 2019

A configurable data management solution For Small-Medium Enterprises (SMEs) pp. 101-115

Menor Dawn Bernadette Ortillo

Kalman filter observation error model applied to vehicle tracking dynamic obstacle correction pp. 116-124

S. M. Siao, Y. R. Chen and L. Y. Shu

Defect formation in EBM parts built at different orientation pp. 125-134

C. Camilleri and A. Rochman

High precision location tracking technology in IR4.0 pp. 135-141

Alvin Ting, David Chieng, Chrishanton V. Sebastiampi and Putri S. Khalid

Comparison of parameter fitting on the model of irradiation effects on bystander cells between Nelder-Mead simplex and particle swarm optimization pp. 142-150

Fuaada Mohd Siam and Muhamad Hanis Nasir

Volume 5, issue 2, 2019

Web application for self-diagnosis and drug recommendation based on user symptoms pp. 62-71

Iuliana Marin, Nicolae Goga and Razvan-Constantin Stanciu

Contactless vital signs monitoring using Doppler Radar sensor pp. 72-78

Khadija Hanifi and M. Elif Karsligil

Deploying hand offmechanism with the software defined network vs mobile IP for 5G network: A feasibility study pp. 79-84

Khaled Y Alghamdi and Robin Braun

Development of an efficient and resilient algorithm For lane feature extraction in image sensor-based lane detection pp. 85-92

Yung-Hsiang Liu, H. P. Hsu and S. M. Yang

Localization of redundant robotic systems with wheeled mobile base: Theory and experiment pp. 93-100

Behnam Pour Pir Ali and Yaser Maddahi

Volume 5, issue 1, 2019

Web-based multi-criteria decision support system in screening and selection of priority projects for inclusion in agency’s annual budget proposal pp. 01-17

Taniegra Sussie Tarrega

A Data Analysis platform for high altitude bio monitoring using DEVOPS principles and time series machine learning pp. 18-24

Felix Constantin Adochiei, Radu Ciucu, Ioana Raluca Adochiei, Florin Ciprian Argatu, CiprianMarius Larco and Miron Casian

Website evaluation using cluster structures pp. 25-36

Kiyoshi Nagata

An advanced electrical approach to gauge rotor position sensors for optimizing electric drive train systems pp. 37-55

Christoph Datlinger and Mario Hirz

Volume 4, issue 6, 2018

Transfer of the data preprocessing parameters and fore- casting models pp. 214-221

Arthur Stepchenko, Jurij Chizhov and Ludmila Aleksejeva

Effect of fiber volume fraction to tensile strength in com- posites polyester reinforced Sugar Palm Fiber (SPF) pp. 222-229

Fatkhurrohman and Zunairoh

Potential implications and advantages of implementing protected u-turns in Lahore, Pakistan pp. 230-235

Muhammad Tanveer, Huapu Lu, Faizan Ahmad Kashmiri and Salman Maqbool

Evaluating thermal conductivity of desert sand under different initial physical properties pp. 236-240

Hanin Atwany, Mousa Attom, Mohammad O. Hamdan, Bassam A. Abu-Nabah and Abdul Hai Alami

Enhanced CRISP-DM model for SME coach operator pp. 241-253

Siti Aishah Mohd Selamat, Simant Prakoonwit, Reza Sahandi and Wajid Khan

Volume 4, issue 5, 2018

Automatic venipuncture insertion point recognition based on machine vision pp. 186-190

Cheng-Ho Chen, Yun-Sheng Ye and Wen-Tung Hsu

Design and analysis of thermally actuated flaps with em- bedded shape memory alloys pp. 191-196

Chi Yang, Sylvester Abanteriba, Neng Zhang and Andrew Becker

Sustainability in automotive interior – comparison of volume and premium brand manufacturers pp. 197-206

Wanja Wellbrock, Daniela Ludin and Linda Rohrle

Design and simulation of optimized QPSK transmitter using HDL code in MATALB pp. 208-213

Alhamzah Taher Mohammed

Volume 4, issue 4, 2018

Ranking of recycling technologies metal components of end of life vehicles by using modified electre pp. 143-148

M. Vulic´, M. Pavlovic´, D. Tadic, A. Aleksic and A. Tomovic

Wireless sensor network development: Targeting and control system for semi-ballistic vehicle for rapid and precise search and rescue applications pp. 149-161

Leah A. Alindayo and Jonathan C. Maglasang

Neural networks application for water distribution demand-driven decision support system pp. 160-175

Cherl Nino M. Locsin and Rosana J. Ferolin

Maritime safety risk analysis in Alur Pelayaran Barat Surabaya (APBS) during dredging process pp. 176-185

Rizki Kresna W

Volume 4, issue 3, 2018

Flame transition velocities at various intercylinder spacing for side-by-side dual blowing cylindrical burners pp. 102-110

Hsing-Sheng Chai, Vong-Ren Chen and Chiun-Hsun Chen

Towards designing high-performance restful multime- dia web services on FPGA pp. 111-117

Al-Canaan Amer and Khoumsi Ahmed

The integration of AHP and QFD for contractors selection pp. 118-129

Briliantie Irma and Imam Baihaqi

Integrating customer experience quality and QFD for im- proving quality of wifi broadband service experience in telecommunication company pp. 130-142

Indaka Pradnya Rityatama and Udisubakti Ciptomulyono

Volume 4, issue 2, 2018

Anti-copy and authenticity verification method for ceramic products: Development of new glass phosphor with two optical features pp. 46-56

Masaki Fujikawa, Saki Koyama and Shingo Fuchi

Flow past porous cylinder/sphere with/without blowing pp. 57-69

Hsing-Sheng Chai, Hui-Zhen Chen and Chiun-Hsun Chen

Vertical integration for smart manufacturing-The dynamic capability perspective pp. 70-78

Cheng Mei Tung

Industry 4.0 implementation framework for the producing industry pp. 79-90

Guenther Schuh, Christoph Kelzenberg, Jan Wiese and Felix Stracke

Detection of melanoma cancer using gray level cooccurance matrix and artificial neural network methods pp. 91-101

Nurjannah Syakrani and Rheza Ghivary Santoso

Volume 4, issue 1, 2018

Detailed analytical methods for simulation of concrete target resistance against F-4D jet impact pp. 01-08

Thomas H.K. Kang and Joon-Ki Hong

The use of hydrophobic beads in triglyceride hydrolysis pp. 09-16

Astri Nur Istyami, Made Tri Ari Penia Kresnowati, Tirto Prakoso and Tatang Hernas Soerawidjaja

An approach to open source model on the collaborative construction in human civilization pp. 17-26

Chih-Ming Chien and June-Hao Hou

Effects of cutting speed on tool nose wear with ACE-MQL aerosol at optimum-temperature pp. 27-36

S. W. M. A. I. Senevirathne and R. K. P. S. Ranaweera

Aero structural optimization for sailplane wing in preliminary design pp. 37-47

Ahmed El Ibrahim, Sohayb Abdul Karim and Ibrahim Gov