Mathematical models creation for calculating dimensional accuracy at the construction stages of an analytical standard using the chain method

Iuriy Vorobiov, Kateryna Maiorova (), Iryna Voronko (), Oleksandr Skyba and Oleh Komisarov
Additional contact information
Iuriy Vorobiov: National Aerospace University «Kharkiv Aviation Institute»
Kateryna Maiorova: National Aerospace University «Kharkiv Aviation Institute»
Iryna Voronko: National Aerospace University «Kharkiv Aviation Institute»
Oleksandr Skyba: National Aerospace University «Kharkiv Aviation Institute»
Oleh Komisarov: «Motor Sich» Company

Technology audit and production reserves, 2024, vol. 1, issue 1(75), 26-34

Abstract: The object of research is the process of forming a mathematical model (MM) for calculating accuracy at the stages of construction an analytical standard (AS) using the chain method, the application of which is shown on the example of an aviation object (AO). The analysis of the investigated AO, namely the helicopter stabilizer, was carried out using modern 3D scanners and the creation of its analytical portrait (AP). The problem is to create the most similar AP and compare it with AS, taking into account the results of the calculations. The following results were obtained: the AS was built and the AP of the stabilizer geometry was created, a comparative analysis of the AP and AS was carried out, and the results of the accuracy of the object geometry calculations were obtained. Aerodynamic calculations of stabilizer characteristics were also carried out, analysis of standardized aerodynamic profiles was carried out taking into account the accepted limitations for forming the stabilizer AS. The scientific and practical novelty of the obtained results is as follows: the created MM for calculating the accuracy of the dimensions of the unit contour using the chain method made it possible to estimate the tying errors that occur when using the loft-template method. This made it possible to choose equipment and software for construction the AS stabilizer. The selection of improved values of the object's aerodynamic characteristics made it possible to build an AS based on the standardized NACA 0012 profile. This can be used as an information basis for the organization of small-scale production of the object under study. That is, in general, the process of reverse engineering made it possible to conduct a detailed analysis of sections, aerodynamic characteristics and improve them for the future improved profile. This design approach provides wider opportunities, eliminates intermediate links and maintains high accuracy of object parameters during its manufacture, which is one of the main requirements in aircraft construction.

Keywords: loft-template method; reverse engineering; aerodynamic profile; analytical portrait; dimensional chain (search for similar items in EconPapers)
Date: 2024
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://journals.uran.ua/tarp/article/download/297732/291186 (application/pdf)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:baq:taprar:v:1:y:2024:i:1:p:26-34

DOI: 10.15587/2706-5448.2024.297732

Access Statistics for this article

More articles in Technology audit and production reserves from PC TECHNOLOGY CENTER
Bibliographic data for series maintained by Iryna Prudius ().