Development of technology of mixture application on vertical surface

Valentyna Halushko, Alexander Meneilyk, Anatolii Petrovskyi, Denys Uvarov and Anastasiia Uvarova
Additional contact information
Valentyna Halushko: Odessa State Academy of Civil Engineering and Architecture
Alexander Meneilyk: Odessa State Academy of Civil Engineering and Architecture
Anatolii Petrovskyi: Odessa State Academy of Civil Engineering and Architecture
Denys Uvarov: Odessa State Academy of Civil Engineering and Architecture
Anastasiia Uvarova: Khortytsia National Training and Rehabilitation Academy

Technology audit and production reserves, 2022, vol. 2, issue 1(64), 6-10

Abstract: The object of research is the development of applying a consistency to a vertical surface using an automated device. One of the most problematic places is the poor quality of work at height and the danger associated with the life of workers. Currently, there is only a manual and semi-mechanized method of applying the mixture to a vertical surface. When applying plaster to a vertical surface inside a building, some countries use a plastering robot. In this case, the work is done with high quality and is serviced by two workers. Therefore, when studying this issue, the authors decided to develop a device with which it is possible to perform work on applying to a vertical surface from the outside of the building with high quality. In the course of the study, technological maps were used, on the basis of which estimates were developed, which showed that the introduction of new technologies makes it possible to obtain up to 20 % cost savings on works, equipment and mechanisms. An economic effect was obtained from the developed technology. This is due to the fact that the proposed technology makes it possible to reduce the cost of work using the developed equipment, since the equipment serves 3 workers, namely 1 operator and 2 workers servicing this equipment. The proposed equipment has a number of features that make it possible to additionally mix the mixture at the outlet, edit the supply of the mixture, apply the required thickness evenly, in particular, control the quality of work. This makes it possible to choose the inclination angle, the thickness of the mixture and obtain indicators of the strength of the mixture and the number of losses. Compared to similar known methods, the mixture is fed automatically, which provides advantages such as quality control, safety precautions and reduces the risk of loss of life.

Keywords: mixture application equipment; vertical surface; nozzle angle; layer thickness; safety precautions (search for similar items in EconPapers)
Date: 2022
References: Add references at CitEc
Citations:

Downloads: (external link)
https://journals.uran.ua/tarp/article/view/257050/254411 (application/pdf)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:baq:taprar:v:2:y:2022:i:1:p:6-10

DOI: 10.15587/2706-5448.2022.257050

Access Statistics for this article

More articles in Technology audit and production reserves from PC TECHNOLOGY CENTER
Bibliographic data for series maintained by Iryna Prudius ().