Creation of an identifier database for the ammonia synthesis computer control system

Anatolii Babichenko, Igor Krasnikov (), Juliya Babichenko, Oleksandr Dzevochko and Ihor Lysachenko
Additional contact information
Anatolii Babichenko: National Technical University «Kharkiv Polytechnic Institute»
Igor Krasnikov: National Technical University «Kharkiv Polytechnic Institute»
Juliya Babichenko: Ukrainian State University of Railway Transport
Oleksandr Dzevochko: National Technical University «Kharkiv Polytechnic Institute»
Ihor Lysachenko: National Technical University «Kharkiv Polytechnic Institute»

Technology audit and production reserves, 2024, vol. 3, issue 2(77), 49-52

Abstract: The object of research is the control system of the synthesis department of the large-tonnage ammonia production unit of the AM-1360 series. An analysis of the functioning conditions of the synthesis department was carried out. The significant influence of the content of inerts in the synthesis cycle on the energy efficiency of ammonia production is shown, the optimal value of which depends both on the accepted level of prices for energy carriers and on the method of using purge gases. The need to create a computer-integrated control technology to optimize the use of purge gases is established. The function of the identifier of such a control technology is defined, namely, continuous refinement based on current information about the state of the main sections of the synthesis department, such as the synthesis column, primary and secondary condensation. The operation of these stations takes place in the conditions of seasonal and daily changes in the heat load, which causes parametric uncertainty of such parameters of the connection of the mathematical model as the concentration of ammonia in the circulating gas at the outlet of the stations listed above. Numerical assessment of these uncertainties according to the results of analytical studies for such technological objects is most often performed using stochastic approximation methods. Let’s note that the significant inertia of the objects of the synthesis department under certain conditions makes it impossible to adapt the parameter to its actual value.An algorithmic base has been created for the formation of an information array of the identifier of the computer-integrated control technology of the ammonia synthesis department, which ensures the separation of transient modes under conditions of uncertainty and allows to perform the task of identifying processes in the synthesis column, in the primary and secondary condensation units. The proposed algorithm allows to perform convergence in the department both on the general and on the component material balances. The algorithm is implemented in the MatLab application program package and tested by means of simulation based on experimental data of industrial operation of AM-1360 series ammonia synthesis units.

Keywords: algorithmic database; identifier; computer-integrated control system; ammonia production (search for similar items in EconPapers)
Date: 2024
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://journals.uran.ua/tarp/article/download/307213/298945 (application/pdf)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:baq:taprar:v:3:y:2024:i:2:p:49-52

DOI: 10.15587/2706-5448.2024.307213

Access Statistics for this article

More articles in Technology audit and production reserves from PC TECHNOLOGY CENTER
Bibliographic data for series maintained by Iryna Prudius ().