Laboratory studies of induction of flow using vibratory wave draining in carbonate low-permeability reservoirs

Victoriia Rubel () and Vyacheslav Rubel
Additional contact information
Victoriia Rubel: National University «Yuri Kondratyuk Poltava Polytechnic»
Vyacheslav Rubel: National University «Yuri Kondratyuk Poltava Polytechnic»

Technology audit and production reserves, 2023, vol. 6, issue 1(74), 28-33

Abstract: The object of the study is a laboratory unit for inducing flow to the well using vibration wave draining in carbonate low-permeability reservoirs. Vibratory wave draining is a method used to stimulate flow draining to the well. The method is based on the fact that mechanical waves generated in the soil can cause the opening of microcracks and pores, which leads to an increase in the fluid flow. Vibratory wave scouring can be effectively used to increase fluid flow in low-permeability carbonate reservoirs. Carbonate reservoirs are a common type of reservoir in the oil and gas industry. They often have low permeability, which makes it difficult to extract fluid.With the help of the plunger device developed in the work, a fluid disturbance was created, thereby creating elastic waves in the conventional well (plastic pipe), which were measured using a manual contact vibrometer. This demonstrated the effectiveness of the vibratory method to increase the well productivity and helped to improve the permeability of the rocks, providing better access to challenge the influx of hydrocarbon products.It is shown that with a significant decrease in the permeability of the formation well zone (FWZ), the flow induction should be started only after the restoration works. Otherwise, the well will be significantly hydrodynamically imperfect due to the quality of the reservoir opening, and the flow of production into the well will occur only through a few separate areas of the reservoir with relatively high permeability, which will lead to uneven production of the reservoir and low return of hydrocarbons. Therefore, it is advisable to use the developed method of influencing the productive layer in low-permeability rocks, such as carbonates with layers of clay, siltstones, argillites, and others, with low formation pressures.The obtained results are based on the generation of vibrations that are transmitted to the wellbore. These vibrations can help break up contaminants and fines in carbonate rocks, facilitating the release of hydrocarbon products and improving permeability.

Keywords: oil and gas industry; laboratory unit; well; permeability; oscillation amplitude; loam; vibration waves; fluid production (search for similar items in EconPapers)
Date: 2023
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://journals.uran.ua/tarp/article/download/291973/285720 (application/pdf)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:baq:taprar:v:6:y:2023:i:1:p:28-33

DOI: 10.15587/2706-5448.2023.291973

Access Statistics for this article

More articles in Technology audit and production reserves from PC TECHNOLOGY CENTER
Bibliographic data for series maintained by Iryna Prudius ().