Cut slope stability assessment along forest roads using the limit equilibrium approaches and Slide software

Mehran Nasiri and Mojtaba Mohammadzade
Additional contact information
Mojtaba Mohammadzade: Department of Forest Engineering, Faculty of Natural Resources, Sari Agricultural Sciences and Natural Resources University (SANRU), Sari, Iran

Journal of Forest Science, 2022, vol. 68, issue 5, 182-189

Abstract: Calculating the factor of safety (FS) as slope stability factor is necessary to prevent environmental damage. Therefore, this paper aims to (i) calculate FS using the limit equilibrium approaches and Slide software and (ii) investigate the stability of slopes according to calculated FS (Janbu and Bishop methods) and status of different sites in the study area (Hyrcanian forest of Iran). Six landslides were selected along the forest road by a field survey. Landslide dimensions including length, width, and height were measured using meters. Slope gradients were measured using the Suunto clinometer. The Slide software was used to evaluate the stability analysis of slopes. According to laboratory tests on soil samples the average of the liquid limit was recorded as 58%. The results of the direct shear test showed that the rate of soil cohesion (c) and coefficient of friction angle (φ) decreased with an increase in moisture content. According to the results, the factors of safety for landslide sites (Sites 1-6) were calculated to be 1.3, 0.65, 0.76, 0.55, 1.19 and 1.51, respectively. These calculated FS can accurately determine the slope status in terms of slope stability. According to the software classification, the status of Site 1 is "susceptible to landside". Sites 2, 3 and 4 are "very high risk". Also, the status of Sites 5 and 6 are "high risk" and "stable", respectively. The instability of the slopes in studied sites is related to the drainage system (lack of culverts or ditches) as well as marlstone as bedrock. According to the calculated FS in different sites and comparison of the obtained results with the real conditions of sites, it can be concluded that the slope stability analysis in the Slide software is very accurate and it can be used to determine the factor of safety under different conditions in terms of morphology, hydrology and soil mechanics.

Keywords: bioengineering; reinforcement; road construction; soil erosion; stabilization (search for similar items in EconPapers)
Date: 2022
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
http://jfs.agriculturejournals.cz/doi/10.17221/21/2022-JFS.html (text/html)
http://jfs.agriculturejournals.cz/doi/10.17221/21/2022-JFS.pdf (application/pdf)
free of charge

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:caa:jnljfs:v:68:y:2022:i:5:id:21-2022-jfs

DOI: 10.17221/21/2022-JFS

Access Statistics for this article

Journal of Forest Science is currently edited by Mgr. Ilona Procházková

More articles in Journal of Forest Science from Czech Academy of Agricultural Sciences
Bibliographic data for series maintained by Ivo Andrle ().