Research in Agricultural Engineering
2003 - 2025
Current editor(s): Bc. Michaela Polcarová From Czech Academy of Agricultural Sciences Bibliographic data for series maintained by Ivo Andrle (). Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.
Volume 71, issue 1, 2025
- Towards interpretability: Assessment of residual networks for tomato leaf disease classification pp. 1-9

- Raphael Berdin and Rob Christian Caduyac
- Anaerobic bio-processing of agricultural waste for the biotechnological production of lactic acid and volatile fatty acid by landfill soil inoculums pp. 10-21

- Andriy Anta Kacaribu, Darwin Darwin, Yuliani Aisyah and Febriani
- An effective machine learning model for the estimation of reference evapotranspiration under data-limited conditions pp. 22-37

- Saravanan Karuppanan, Saravanan Ramasamy, Balaji Lakshminarayanan and Sreemanthrarupini Nariangadu Anuthaman
- Development of smart micro-irrigation system using Arduino Uno for okra cultivation in Bangladesh pp. 38-49

- Sharmin Akter, Md Mostafizar Rahman, Rafatul Zannat, Md Masud Rana, Md Moinul Hossain Oliver and Md Aslam Ali
- Particle motion in mixed flow dryers: The effect of the wall inclination angle and friction pp. 50-59

- Adrienn Bablena, János Beke and István Keppler
- Use of thermal imaging camera for wild animal detection along roads pp. 60-67

- Jiří Brožovský, Veronika Hartová, Martin Kotek, Jan Hart and Jitka Kumhálová
Volume 70, issue 4, 2024
- Control of odour and gaseous emissions from livestock buildings: Recent research and developments pp. 181-197

- Roger Jay Lamadrid De Vela
- Modelling of energy demand prediction system in potato farming using deep learning method pp. 198-208

- Riswanti Sigalingging, Nasha Putri Sebayang, Noverita Sprinse Vinolina and Lukman Adlin Harahap
- Modeling and optimization of dynamic isothermal compressibility features on flowability of Canarium schweinfurthii Engl nutshell powder pp. 209-217

- James Chinaka Ehiem, Victor Ifeanyichukwu Obiora Ndirika, Udochukwu Nelson Onwuka and Raghavan Vijayan
- Prediction of physicochemical characteristics of Lemon (Citrus limon cv. Montaji Agrihorti) using Vis-NIR spectroscopy and machine learning model pp. 218-225

- Jihan Nada Salsabila Erha, Dina Wahyu Indriani, Zaqlul Iqbal, Bambang Susilo and Dimas Firmanda Al Riza
- Ergonomic investigation on spraying task performance in paddy farming activities pp. 226-236

- Dian Mardi Safitri, Novia Rahmawati, Winnie Septiani, Nora Azmi, Azizah Nurul Hanifati, Ummi Noor Nazahiah binti Abdullah and Norashiken binti Othman
- Geometrical analysis of 3-point linkage of tractors for measurement and display of implement's working depth pp. 237-244

- P K Pranav, Anmol Kumar, Abhishek Kumar Ansh and Sanjay Kumar
Volume 70, issue 3, 2024
- The effect of parameter adjustment in sago palm classification-based convolutional neural network (CNN) model pp. 123-133

- Sri Murniani Angelina Letsoin and David Herák
- Detecting adulteration in mustard oil using low-frequency dielectric spectroscopy pp. 134-142

- Venkatesh Mishra, Satyendra Pratap Singh, Sumit Kaur Bhatia, Vishal Singh Chandel and Rajiv Manohar
- The effect of stimulants on the responsiveness and biorhythms of young operators of agricultural machinery pp. 143-154

- Veronika Hartová and Jan Hart
- Advancements in fuzzy expert systems for site-specific nitrogen fertilisation: Incorporating RGB colour codes and irrigation schedules for precision maize production in Bangladesh pp. 155-166

- Bitopi Biswas, Mohammad Tariful Alam Khan, Mohammad Billal Hossain Momen, Mohammad. Rashedur Rahman Tanvir, Abu Mohammad Shahidul Alam and M Robiul Islam Islam
- The efficiency of unmanned aerial vehicles application for rapeseed productivity in Ukraine pp. 167-173

- Fedir Melnychuk, Svitlana Alekseeva, Oleksandra Hordiienko, Oleksii Nychyporuk, Andrii Borysenko and Nataliia Didenko
- Effect of physical energy on germination and seedling vigor of alfalfa seeds (Medicago sativa L.) pp. 174-180

- Ali Hajizadeh Namin, Abbas Akbarnia, Rouzbeh Abbaszadeh, Ali Zenouzi and Majid Masoumian
Volume 70, issue 2, 2024
- Location-specific technology transfer model in an agricultural technology park, Indonesia pp. 61-72

- Harmi Andrianyta, Elisa Anggraeni, Sapta Raharja and Sukardi Sukardi
- Drying and color kinetics of decorticated queen pineapple (Ananas comosus Linn.) fiber bleached with hydrogen peroxide solution pp. 73-81

- Roger Jay Lamadrid De Vela and Arnold Recidocruz Elepano
- Application of the physical properties of local cowpea varieties in the development of a multi-variety cowpea cleaner pp. 82-91

- Babatunde Olusola Adetifa, Elizabeth Ayobami Olumomi, Taiwo Moses Samuel and Ayoola Abiola Babalola
- Study on parameters affecting vibration in height adjustment of a combine harvester header model pp. 92-103

- Kittikhun Prasertkan, Prathuang Usaborisut, Krittatee Jindawong, Kiatkong Suwannakij and Anusorn Iamrurksiri
- Influence of soil tillage technology on tillage erosion pp. 104-110

- Jaroslav Korba, Pavel Brož, Josef Hůla, Petr Novák and Václav Novák
- Digital image processing for preliminary detection of infected porang (Amorphophallus muelleri) seedlings pp. 111-121

- Aryanis Mutia Zahra, Noveria Anggi Nurrahmah, Sri Rahayoe, Rudiati Evi Masithoh, Muhammad Fahri Reza Pahlawan and Laila Rahmawati
Volume 70, issue 1, 2024
- The state of agricultural digitalisation in Hungary pp. 1-12

- Dániel Fróna
- Enhancing melon yield through a low-cost drip irrigation control system with time and soil sensor pp. 13-22

- Thawatchai Thongleam, Kriengkrai Meethaworn and Sanya Kuankid
- Fabrication and performance test of a multipurpose ohmic heating apparatus with a real-time data logging system based on low-cost sensors pp. 23-34

- Diang Sagita, Dadang Dayat Hidayat, Doddy Andy Darmajana, Ari Rahayuningtyas and Hari Hariadi
- Energy and carbon dioxide emission analysis of a batch-mode paddy drying process in a rotary dryer pp. 35-42

- Dewi Qurrota A'yuni, Dede Kurniawan, Muhammad Pradhipta Irwanda Prayoga, Andri Cahyo Kumoro, Mohamad Djaeni and Agus Subagio
- Comparison of experimental and numerical results on flow uniformity of seeds transmitted from the studded feed roller pp. 43-52

- Mustafa Gokalp Boydas
- Reconstructed military machine for unique field testing of agricultural machinery capabilities pp. 53-59

- Kornél Szalay, Jiří Souček, Gábor Bércesi, Adrienn Bablena, Kovács Lászlo, Sayakhat Orazovich Nukeshev, Savelii Kuharets, Volodymyr Kravchuk, Gennadii Golub, Antonín Machálek and Aleksandr Vladimirovich Dobrinov
Volume 69, issue 4, 2023
- Mathematical modeling of drying parameters of moringa oleifera leaves in a cabinet drye pp. 159-166

- Timothy Adekanye, Abiodun Okunola, Olumuyiwa Moses, Endurance Idahosa, Yisa Boye and Aminu Saleh
- Development and evaluation of an electromagnetic device to improve the physiological properties of some crop seeds pp. 167-178

- Ahmed Shawky El-Sayed
- Operating performance of manual, semi-automatic, and automatic tractor guidance systems for precision farming pp. 179-188

- Paola D'Antonio, Andi Mehmeti, Francesco Toscano and Costanza Fiorentino
- Determination of sorghum production energy input-output balance under farmers' practices in the Hararghe lowland areas of Ethiopia pp. 189-198

- Birhanu Gurracho, Yetenayet Tola, Abebe Badie, Solomon Habtegabriel and Sirawdink Forsido
- Utilisation of rheological models for describing the mechanical behaviour of oil palm empty fruit bunches under compression loading pp. 199-205

- Tomáš Saller and David Herák
- Development of microclimate in the New Holland T6.165 tractor pp. 206-210

- Jan Hart and Veronika Hartová
Volume 69, issue 3, 2023
- 3D finite element analysis of tine cultivator and soil deformation pp. 107-117

- Muhammad Hashaam, Muhammad Waqar Akram, Moaz Ahmad, Muhammad Zuhaib Akram, Muhammad Faheem, Muhammad Maqsood and Muhammad Aleem
- Design and construction of coffee roasting machine with rounding cylinder tube using electric heat source pp. 118-123

- Andriani Lubis, Syafriandi Syafriandi, Muhammad Idkham and Ari Maulana
- Enhanced biodiesel production from waste cooking oils catalyzed by sodium hydroxide supported on heterogeneous co-catalyst of bentonite clay pp. 124-131

- Darwin Darwin, Rini Ayu Marisa Harahap, Atmadian Pratama, Muhammad Thifa and Muhammad A Alwi Fayed
- A novel hybrid feature method for weeds identification in the agriculture sector pp. 132-142

- Sheeraz Arif Arif, Rashid Hussain, Nadia Mustaqim Ansari and Waseem Rauf
- Study on drying of bitter gourd slices based on halogen dryer pp. 143-150

- Dinh Anh Tuan Tran, Tuan Nguyen Van, Dinh Nhat Hoai Le and Thi Khanh Phuong Ho
- Evaluation and modelling of biogas production from batch anaerobic digestion of corn stover with oxalic acid pp. 151-157

- Shitophyta Lukhi Mulia, Arnita Arnita and Wulansari Hilda Dyah Ana
Volume 69, issue 2, 2023
- Evaluation of low temperature drying characteristics of fresh tea leaves (Camellia assamica) in an environmental chamber using mathematical models pp. 55-64

- Anindita Sharma and Partha Pratim Dutta
- Comparison of the machine learning and AquaCrop models for quinoa crops pp. 65-75

- Rossy Chumbe, Stefany Silva and Yvan Garcia
- Contrasting tillage systems and vertical arable layer stratification impacts on soil aggregates and root biomass in Lithuania pp. 76-84

- Inga Andruškaité and Vaclovas Bogužas
- Field evaluation of a bent leg tillage implement in dry soil conditions pp. 85-93

- Aliakbar Solhjou and Sayed Mansor Alavimanesh
- The effect of large doses of organic fertilisers on maize pp. 94-100

- Pavel Brož, Jaroslav Korba, Jitka Edrová, Josef Hůla and Petr Šařec
- Influence of primary tillage on the displacement of soil particles pp. 101-106

- Pavel Brož and Josef Hůla
Volume 69, issue 1, 2023
- Thin layer drying characteristics of alligator pepper, ginger and turmeric pp. 1-8

- Adebayo Olasunkanmi Salau, Babatunde Sunday Ogunsina, Adewale Waliu Adebayo and Adekunle Felix Okunade
- Model development and optimisation of the disc plough efficiency on loamy-sand soil in South-East Nigeria pp. 9-17

- Okechukwu Oduma, Precious Ehiomogue and Dilibe Ifanyi Ntunde
- Influence of the excavator hydraulic system efficiency on the productivity pp. 18-27

- Michal Jůza and Petr Heřmánek
- Dielectric properties of materials for 3D printing at high frequencies pp. 28-35

- Tomáš Pícha and Stanislava Papežová
- Estimation of corn coefficients with vegetation indices using multispectral camera and drone pp. 36-47

- Christos Dimitrios Papanikolaou and Maria Andreas Sakellariou-Makrantonaki
- Development and evaluation of a low-cost evaporative cooling system for agricultural product storage pp. 48-53

- Natesan Kapilan and Vijay Kumar Patil
| |