EconPapers    
Economics at your fingertips  
 

Design of active stability control system of agricultural off-road vehicles

J. Rédl, V. Váliková and J. Antl
Additional contact information
J. Rédl: Department of Machine Design, Faculty of Engineering, Slovak University of Agriculture in Nitra, Nitra, Slovak Republic
V. Váliková: Department of Machine Design, Faculty of Engineering, Slovak University of Agriculture in Nitra, Nitra, Slovak Republic
J. Antl: Department of Machine Design, Faculty of Engineering, Slovak University of Agriculture in Nitra, Nitra, Slovak Republic

Research in Agricultural Engineering, 2014, vol. 60, issue SpecialIssue, S77-S84

Abstract: Part of active stability control system design of an agricultural technological vehicle designated for working in mountain and foothill areas is described. The principle of active control of angular velocities of the centre of gravity has been used. During the manoeuvre, active tipping axes are identified by orientation of the weight vector. From experimental tests of a machine MT8-222 based on the Standard STN 47 0170, the real records of angular velocities were obtained. Tests were executed on the slope with an average slope of 32 degrees. From computation critical angular velocities were gained, by which the machine could get into the position of labile stability during the manoeuvre. The regulator was simulated in Matlab® which controlled the actual value of angular velocity compared with the critical one. In case the boundary zone of critical angular velocity was reached, the regulator sends a signal to the fuel control system and then vehicle speed decreased. During experimental tests, the vehicle did not turn over. Therefore, the angular velocity was simulated by a generated function so that the functionality of the designed regulator was verified.

Keywords: vehicle dynamics; mathematical modelling; simulation (search for similar items in EconPapers)
Date: 2014
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
http://rae.agriculturejournals.cz/doi/10.17221/39/2013-RAE.html (text/html)
http://rae.agriculturejournals.cz/doi/10.17221/39/2013-RAE.pdf (application/pdf)
free of charge

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:caa:jnlrae:v:60:y:2014:i:specialissue:id:39-2013-rae

DOI: 10.17221/39/2013-RAE

Access Statistics for this article

Research in Agricultural Engineering is currently edited by Bc. Michaela Polcarová

More articles in Research in Agricultural Engineering from Czech Academy of Agricultural Sciences
Bibliographic data for series maintained by Ivo Andrle ().

 
Page updated 2025-03-22
Handle: RePEc:caa:jnlrae:v:60:y:2014:i:specialissue:id:39-2013-rae