EconPapers    
Economics at your fingertips  
 

Abrasive wear resistance of selected woods

Milan Brožek
Additional contact information
Milan Brožek: Department of Material Science and Manufacturing Technology, Faculty of Engineering, Czech University of Life Sciences Prague, Prague, Czech Republic

Research in Agricultural Engineering, 2017, vol. 63, issue 2, 91-97

Abstract: In this contribution, the results of the wear resistance study of 10 sorts of wood (apple, aspen, beech, hornbeam, horse-chestnut, London plane, mahogany, silver fir, sour cherry and sweet cherry) are published. The laboratory tests were carried out using the pin-on-disk machine when the abrasive clothes of three different grits (240, 120 and 60) were used. The wear intensity was assessed by the volume, weight and length losses of the tested samples. From the results of the carried out tests it follows that the wear resistance of different woods is different. It was proved that the wear resistance of different woods depends on the abrasive particles size, too. Also the technical-economical evaluation was part of the carried out tests. It was univocally proved that at the intensive abrasive wear using the abrasive cloth the best results were shown by hard woods, e.g. apple, beech or mahogany. Soft woods, e.g. horse-chestnut, silver fir or sweet cherry, are cheap, but their wear is bigger compared to hard woods.

Keywords: bonded abrasive particles; abrasive cloth; laboratory tests; technical-economical evaluation (search for similar items in EconPapers)
Date: 2017
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
http://rae.agriculturejournals.cz/doi/10.17221/74/2015-RAE.html (text/html)
http://rae.agriculturejournals.cz/doi/10.17221/74/2015-RAE.pdf (application/pdf)
free of charge

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:caa:jnlrae:v:63:y:2017:i:2:id:74-2015-rae

DOI: 10.17221/74/2015-RAE

Access Statistics for this article

Research in Agricultural Engineering is currently edited by Bc. Michaela Polcarová

More articles in Research in Agricultural Engineering from Czech Academy of Agricultural Sciences
Bibliographic data for series maintained by Ivo Andrle ().

 
Page updated 2025-03-22
Handle: RePEc:caa:jnlrae:v:63:y:2017:i:2:id:74-2015-rae