Polyacrylamide coated Milorganite™ and gypsum for controlling sediment and phosphorus loads

Damodhara R. Mailapalli and Anita M. Thompson

Agricultural Water Management, 2011, vol. 101, issue 1, 27-34

Abstract: The application of polymer for controlling erosion and the associated nutrient transport has been well documented. However, comparatively less information is available on the effect of polymer application together with soil amendments. In this study, the effect of polyacrylamide (PAM) in combination with surface application of gypsum and Milorganite™ (MILwaukee ORGAnic NITtrogEn) biosolid for reducing sediment and phosphorus transport under laboratory rainfall simulations was investigated. The treatments considered were bare soil, gypsum, Milorganite™, gypsum+Milorganite™, PAM-coated gypsum and PAM-coated Milorganite™. Application rates for gypsum and Milorganite™ were 392kgha−1 (350lb/acre) and 726kgha−1 (650lb/acre), respectively. The PAM was coated on gypsum and Milorganite™ at an application rate of 11.2kgha−1 (10lb/acre) and 22.4kgha−1 (20lb/acre), respectively. Rain simulation experiments were conducted using a rainfall intensity of 6.0cmh−1 for 1h on a 10% slope. Surface runoff was collected continuously from each soil box over 10min intervals and leachate was collected continuously over the 60min simulation. The reduction in runoff or in leachate for all treatments was not significantly different from the bare soil control. The sediment loss for PAM coated Milorganite™ was reduced by 77%, when compared to bare soil. However, the sediment loss was not significantly reduced for any other treatment compared to bare soil. The PAM-coated gypsum was not effective for erosion control in our study, and there appears to be a correlation between effectiveness and prill size. However, the gypsum (coated and uncoated) contributed about half of the dissolved reactive phosphorus (DRP) export (in the runoff) compared to bare soil. The PAM-coated Milorgante™ reduced the DRP and total phosphorus (TP) export to 0.3–0.5 times that of Milorganite™ and to levels similar to bare soil. The decreased sediment and phosphorus export for the PAM-coated Milorganite™ treatment is a signal for a potential management practice for controlling erosion and nutrient transport in fertilized agricultural landscapes.

Keywords: Biosolids; Milorganite™; Gypsum; Polyacrylamide; Runoff; Sediment; Phosphorous (search for similar items in EconPapers)
Date: 2011
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (1)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0378377411002289
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:agiwat:v:101:y:2011:i:1:p:27-34

DOI: 10.1016/j.agwat.2011.08.021

Access Statistics for this article

Agricultural Water Management is currently edited by B.E. Clothier, W. Dierickx, J. Oster and D. Wichelns

More articles in Agricultural Water Management from Elsevier
Bibliographic data for series maintained by Catherine Liu ().