EconPapers    
Economics at your fingertips  
 

Engineering Costs and Production Economics

1980 - 1991

Continuation of Engineering and Process Economics. Continued by International Journal of Production Economics.

Current editor(s): R. W. Grubbström

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.


Volume 21, issue 3, 1991

Investment justification in flexible manufacturing systems pp. 203-209 Downloads
M. Kakati and U. R. Dhar
Dynamic simulation of mobile robot navigation in warehousing environments pp. 211-225 Downloads
Ram Pandit, S. R. Menon and S. G. Kapoor
Economic ordering policy for deterministic two-echelon distribution systems pp. 227-231 Downloads
C. Das and S. K. Goyal
Capital budgeting and plant capacity pp. 233-241 Downloads
Itzhak Krinsky
Using multiple time-series analysis, of assembly-line production of automobile engines -- a case study pp. 243-258 Downloads
Toni M. Somers and Yash P. Gupta
Flexible manufacturing systems in practice -- results of a study of operational use pp. 259-276 Downloads
R. Hackstein and W. Budenbender
Systematic machine-condition monitoring -- a case study from Parenco paper mill in Holland pp. 277-293 Downloads
Matt o'Sullivan
Bicriterion jobshop scheduling with total flowtime and sum of squared lateness pp. 295-299 Downloads
Parthasarati Dileepan and Tapan Sen

Volume 21, issue 2, 1991

Integrated time-functions and cost-functions as a basis for analysis of complex production systems pp. 95-103 Downloads
A. D. M. van de Ven and L. Florusse
An engineering-economic evaluation of enhanced recovery of saudi crudes by chemical flooding pp. 105-109 Downloads
M. S. Al-Blehed, M. H. Sayyouh and S. M. Desouky
Economic production of a product and replenishment of its raw materials pp. 111-115 Downloads
S. K. Goyal
Real-time part sequencing in a flexible assembly cell: system development and evaluation pp. 117-131 Downloads
S. M. A. Suliman, A. M. El-Tamimi and D. F. Williams
Costs of disposal of sewage sludge: a case study pp. 133-141 Downloads
K. C. Hau and D. Sculli
A decision network application to batch size determination for single-stage systems pp. 143-153 Downloads
John S. Oakland, Amrik S. Sohal and Andrew Wirth
Experiences of different approaches in logistics pp. 155-169 Downloads
Eero Eloranta, Ari-Pekka Hameri and Kimmo Lahteenmaki
Mathematical modeling of the AGVS capacity requirements planning problem pp. 171-175 Downloads
R. G. Kasilingam
A heuristic procedure for determining ordering and price-discount policies for commodities with two-period perishability pp. 177-190 Downloads
D. Gupta and Z. Dai
Investing in reducing lead-time randomness in continuous-review inventory models pp. 191-197 Downloads
Yigal Gerchak and Mahmut Parlar

Volume 21, issue 1, 1991

Replacement of auxiliary power supply system--A case study in an urban railway pp. 1-9 Downloads
S. M. L. Mak and D. Sculli
Mathematical formulation of the economic dispatch problem of a power system by using a linear load flow model pp. 11-20 Downloads
Georgios Leonidopoulos
Reduction of manufacturing lead-time through selection of machining rate and unit handling size pp. 21-34 Downloads
Pius J. Egbelu
A review of research on AGVS vehicle management pp. 35-42 Downloads
Christine G. Co and J. M. A. Tanchoco
An algorithm for the N/M/parallel/Cmaxpreemptive due-date scheduling problem pp. 43-49 Downloads
T. C. E. Cheng and C. C. S. Sin
Strategies in spare parts management using a reliability engineering approach pp. 51-57 Downloads
Anwar K. Sheikh, Frank L. Callom and Salim G. Mustafa
Procurement under uncertain supply lead times -- A dual- sourcing technique could save costs pp. 59-68 Downloads
Ranga V. Ramasesh
Sizing segregation bins in bulk conveyor systems with discrete loading sources pp. 69-80 Downloads
J. V. Carnahan, S. D. Thompson and P. L. Webster
Minimizing production costs for a robotic assembly system pp. 81-92 Downloads
Maged M. Dessouky and James R. Wilson

Volume 20, issue 3, 1990

A new approach to the dynamic lot size model pp. 255-263 Downloads
Fuchiao Chyr, Tsong-Ming Lin and Chin-Fu Ho
Multiple machine replacement analysis pp. 265-275 Downloads
Lawrence C. Leung and J. M. A. Tanchoco
Analysis of capital investment: A conceptual cash flow model pp. 277-284 Downloads
Ingvar Persson
Production cost in the periphery: The case of Greece pp. 285-294 Downloads
Costas P. Pappis
On manpower planning in the presence of learning pp. 295-303 Downloads
Yigal Gerchak, Mahmut Parlar and S. Sankar Sengupta
Selecting systems to support Computer-Integrated Manufacturing (CIM) pp. 305-318 Downloads
R. J. Boaden and B. G. Dale

Volume 20, issue 2, 1990

Introduction pp. 109-112 Downloads
Mario T. Tabucanon and Vira Chankong
Multi-objective, multi-period planning for a manufacturing plant pp. 113-120 Downloads
T. Trzaskalik
Analysis of multi-item inventory systems under resource constraints: A non-linear goal programming approach pp. 121-127 Downloads
G. Padmanabhan and Prem Vrat
Trade-off analysis of buffer stock versus emergency delivery in the knockdown production systems pp. 129-138 Downloads
Shusaku Hiraki, Kazuyoshi Ishii, Katsuhiko Takahashi and Rintaro Muramatsu
Decision criteria on the branch-and-bound method for optimal single-level lot sizing with backlogging pp. 139-150 Downloads
Yih-Chearng Shiue
Productivity measurement through multi-criteria decision making pp. 151-163 Downloads
Pradip K. Ray and S. Sahu
Chance constrained quality control pp. 165-174 Downloads
David L. Olson
Multicriteria design of ceramic piston crown pp. 175-189 Downloads
Juhani Koski and Risto Silvennoinen
A decomposition strategy for multicriteria optimization with application to machine tool design pp. 191-202 Downloads
J. Montusiewicz and A. Osyczka
Multiple criteria decision support system for production management pp. 203-212 Downloads
De-Shih Wu and Mario T. Tabucanon
Decision support system for production control: Multiple criteria decision making in practice pp. 213-218 Downloads
Andras Por, Janos Stahl and Jozsef Temesi
Resource management and strategic decision making in industrial R&D departments:: Decision support using judgmental modelling in the chemical industry pp. 219-229 Downloads
Gerd Islei, Geoff Lockett and Mike Stratford
Multiple criteria decision making in industrial project management pp. 231-240 Downloads
Willem Brauers
Application of a multiobjective electric power production costing model to the U.S. acid rain problem pp. 241-251 Downloads
James S. Heslin and Benjamin Hobbs

Volume 20, issue 1, 1990

Obituary pp. 1-1 Downloads
W. M. J. Geraerds
Learning curves and production functions: An integration pp. 3-12 Downloads
Thomas Gulledge and Norman Womer
The influence of inflation on productivity calculations: A case study pp. 13-21 Downloads
A. S. H. Yousif and B. G. Dale
Analytic Delphi Method (ADM): A strategic decision making model applied to location planning pp. 23-28 Downloads
Hossein Azani and Reza Khorramshahgol
The matching of sales plans and production schedules using a microcomputer pp. 29-36 Downloads
Jorma Kuutti
Design for a comprehensive maintenance planning recording and optimization system pp. 37-42 Downloads
D. J. Sherwin
Simulation study of production inventory management in a mylar capacitor manufacturing company pp. 43-50 Downloads
T. C. E. Cheng
The inventory control problem and the optimal supply price: Micro theoretic pp. 51-64 Downloads
Kofi Kissi Dompere
Stability of a two-stage production and inventory model pp. 65-71 Downloads
Knut Richter and József Vörös
Common cycle scheduling in a multistage production process pp. 73-80 Downloads
John I. S. Hsu and M. EI-Najdawi
Nonlinear multiproduct CVP analysis with 0-1 mixed integer programming pp. 81-91 Downloads
Wen-Hsien Tsai and Tsong-Ming Lin
Optimization of spare parts in a multilevel maintenance system pp. 93-99 Downloads
Ing. Svetislav Kostic and Mr. Ing. Zoran Pendic
Economic ordering policy during special discount periods for dynamic inventory problems under certainty pp. 101-104 Downloads
S. K. Goyal
A quantitative comparison of production and inventory control concepts: Peter Striekwold, University of Twente, The Netherlands, December 1988 pp. 105-106 Downloads
Peter Ovrin
Page updated 2025-03-31