Engineering Costs and Production Economics

1980 - 1991

Continuation of Engineering and Process Economics. Continued by International Journal of Production Economics.

Current editor(s): R. W. Grubbström

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 14, issue 4, 1988

Cost and price indices pp. 247-258

Norman Boyd

Estimating capital costs from an equipment list: A case study pp. 259-266

Vinod T. Sinha

Dynamic lot sizing and facility location pp. 267-273

Dirk L. van Oudheusden and Kashi N. Singh

Economic operation of a power system pp. 275-279

Georgios Leonidopoulos

A mixed-integer programming model for the design and planning of power systems in oil production platforms pp. 281-296

Arild Olsbu, Per A. Loeken and Ignacio E. Grossmann

Mathes: An expert system for material handling equipment selection pp. 297-310

Edward L. Fisher, Jeremy B. Farber and Michael G. Kay

Volume 14, issue 3, 1988

Optimizing the location of input/output stations within facilities layout pp. 177-187

Benoit Montreuil and H. Donald Ratliff

Design of a model generator for simulation in SLAM pp. 189-198

Henry C. Co and S. K. Chen

Costs of production in the Shenzhen special economic zone of China pp. 199-209

J. C. M. Chan, D. Sculli and S. K. Wong

Including variability of discrete estimates in engineering economic comparisons pp. 211-216

W. Kennedy and Robert P. Davis

Simulating the design and analysis of quality control systems in manufacturing pp. 217-227

S. Palaniswami and M. Z. Hassan

Accounting versus economic valuation in a simple inventory model pp. 229-232

Carl J. Norstrom

Numerical evaluation of heuristics for the multi-item single-level capacitated lot-size problem pp. 233-243

H. O. Gunther

Volume 14, issue 2, 1988

Guest editorial pp. 85-85

D. V. Ferens

Design analysis through techniques of parametric cost estimation pp. 87-93

J. M. Daschbach and Henry Apgar

Techniques for cost estimating in early program phases pp. 95-106

Claus J. Meisl

Whole life cost studies: A defence management perspective pp. 107-115

J. J. Griffin

Missile propulsion cost modeling pp. 117-129

Claus J. Meisl

Beyond parametrics: The role of subjectivity in cost models pp. 131-136

Michael N. Beltramo

Parametric modelling as a scheduling tool pp. 137-144

K. F. Matta, J. M. Daschbach and B. N. Wood

Comparing two techniques for fitting sample data to a cumulative average learning curve pp. 145-150

Jeffrey C. Daneman

An application of Markov chains to life-cycle cost analysis pp. 151-156

Evin J. Stump

Software parametric cost estimation: Wave of the future pp. 157-164

Daniel V. Ferens

Parametric estimating for new business ventures pp. 165-176

Bruce E. Fad and Roy M. Summers

Volume 14, issue 1, 1988

A more efficient formulation of the single machine, static demand, lot scheduling problem pp. 3-10

Fayez Fouad Boctor

Production scheduling on parallel machines subject to staircase demands pp. 11-17

Roman Slowinski

Multicriteria scheduling of dynamic production activities pp. 19-24

Jan Weglarz

The local search approach to flexible flow line scheduling pp. 25-37

Sandeep Kochhar, Robert J. T. Morris and Wing S. Wong

Production with optimum irrigation management under saline conditions pp. 41-46

Keith Knapp and Ariel Dinar

Integration of network analysis systems with MRP in a make-to-order manufacturing environment pp. 47-59

G. Harhalakis and S. S. Yang

Bottleneck generalized assignment problems pp. 61-65

J. B. Mazzola and A. W. Neebe

Scheduling in large scale production systems: A medium term production management model pp. 67-74

Klaus Meier and Jean-Marie Proth

A tool for constructing production systems on the deductive database system adbis pp. 77-84

T. Takagi, K. Ushijima, F. Matsuo and S. Futamura

Volume 13, issue 4, 1988

Economic evaluation of investments in new production technologies pp. 241-262

P. A. Moerman

An efficient algorithm to cluster order picking items in a wide aisle pp. 263-271

M. Goetschalckx and H. D. Ratliff

Improving storage and order picking in a person-on-board as/r system: A case study pp. 273-283

Dirk L. van Oudheusden, Ya-Juei J. Tzen and Hwei-Tang Ko

Order batching algorithms for a man-on-board automated storage and retrieval system pp. 285-294

Hark Hwang and Moon-Kyu Lee

Industrial dynamics model building of a close-coupled production-distribution system pp. 295-310

C. M. G. Olsmats, J. S. Edghill and D. R. Towill

Analysis of storage policies for miniload AS/RS pp. 311-318

Ali Kaylan and D. J. Medeiros

Procurement and inventory systems analysis: by Jerry Banks and W.J. Fabrycky, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1987 pp. 319-319

Aaron Rose

Volume 13, issue 3, 1988

Cost and price indices pp. 157-168

Norman Boyd

Inventory replenishment policies for the case of decreasing trend in demand pp. 169-174

S. Ramani and R. Venkatraman

A planning method of production for an iron industry through the analysis of the break even point pp. 175-182

Luigi Poiaga

Comparing cost estimates of processes at different stages of development pp. 183-188

Ivan V. Klumpar and Malcolm A. Weiss

Product cost-estimation by the designer pp. 189-198

Leo S. Wierda

Reorder point inventory models for stationary and non-stationary demand pp. 199-205

H. Hafner, M. Kuhn and Ch. Schneeweiss

A physical system theory approach to material flow and productivity analysis pp. 207-215

Sushil N. Singh and B. K. Jain

Capacity allocation and material flow in planning group technology cells pp. 217-228

Avraham Shtub

Warehouse logistic systems -- A CAD model pp. 229-237

A. M. Perlmann and M. Bailey

Volume 13, issue 2, 1988

Cost and price indices pp. 77-88

Norman Boyd

Economic comparison of manual and mechanical hake filleting pp. 89-95

A. Zugarramurdi and M. A. Parin

Productivity movement and measurement in Taiwan: A case study pp. 97-109

Tsong Ming Lin and Wann Yih Wu

Inspection decision theory: Deming inspection criterion and time-adjusted rate-of-return compared pp. 111-124

Emmanuel P. Papadakis, Craig H. Stephan, Michael T. McGinty and W. Bart Wall

Some findings on joint replenishment of items with stochastic demand and backordering pp. 125-133

Yasemin Gok, Ahmet Satir and Suresh Goyal

Shale beneficiation and oil recovery from the concentrate pp. 135-154

Malcolm A. Weiss, Ivan V. Klumpar, Terry A. Ring and Carl R. Peterson

Micro hydroelectric power stations: L. Monition, M. LeNir and J. Roux (translated from French to English by Joan McMullan). John Wiley and Sons, Chichester, England, 1984 pp. 155-156

Aaron Rose

Volume 13, issue 1, 1987

Inventory system costs: Source data for analysis pp. 1-12

Stanley A. Brooking

Lot sizing in a practical manufacturing system pp. 13-26

P. J. O'Grady and M. D. Byrne

Implementing just-in-time concepts into European companies pp. 27-37

Horst Wildemann and John G. Carlson

Productivity measurement in multi-product manufacturing firms pp. 39-54

Pradip K. Ray and S. Sahu

A computer-aided 'foundry specific' planning and estimating system: Its development and some operating results pp. 55-63

A. Ajmal and B. G. Dale

Orderbook profiles: Managing beyond the schedules pp. 65-70

T. A. J. Nicholson and T. S. Tan

Economics and financial studies for engineers: by D.J. Leech, New Halsted Press, John Wiley & Sons, New York, 1982 pp. 71-71

Aaron Rose

Electricity and industrial productivity: A technical and economic perspective: by Philip S. Schmidt, Pergamon Press, New York, 1984 pp. 71-72

Aaron Rose