Environmental and economic analyses of recycled asphalt concrete mixtures based on material production and potential performance

Rebekah Yang, Seunggu Kang, Hasan Ozer and Imad L. Al-Qadi

Resources, Conservation & Recycling, 2015, vol. 104, issue PA, 141-151

Abstract: As roadway construction is a material and energy intensive activity with potential impacts on the environment, the pavement industry has been seeking for more sustainable construction practices in the past decades. The use of recycled materials such as reclaimed asphalt pavement (RAP) and recycled asphalt shingle (RAS) is widely accepted as among the most commonly used sustainable strategies for asphalt concrete (AC) pavement due to its ability to partially substitute virgin asphalt binder and aggregate in AC mixtures. This study evaluated the environmental and economic benefits and trade-offs of including recycled materials in pavements using a life-cycle approach. Eleven AC mix designs from Illinois with various asphalt binder replacement (ABR) rates were evaluated in terms of environmental and economic impacts using life-cycle assessment (LCA) and an itemized cost analysis. The LCA was conducted in accordance to International Standard Organization ISO 14044:2006 guidelines. The life-cycle impacts of producing the AC mixtures were calculated in terms of energy, global warming potential, and cost. A general trend of reduction in these three sustainability metrics was observed for mix production with increasing ABR. However, without proper modification and engineering of mix designs (e.g. addition of a softer grade virgin asphalt binder), AC mixtures with high ABR can experience reduced fatigue life. Thus, the effect of pavement performance on the environmental impacts of using mixtures with various ABR was also considered, assuming that these mixtures are used in a 4-in. (102-mm) overlay over a four-lane-mile (1.6km) roadway. A breakeven concept was used to find the decreased service life at which the energy savings from using recycled asphaltic materials in the overlay equal the additional energy consumption incurred from a potential reduced performance in the pavement use phase. The breakeven point was found to be very sensitive to the traffic level of the overlay, with the breakeven service life decreasing rapidly with increased traffic.

Keywords: Life-cycle assessment; Pavement; Road construction; Recycled asphalt pavement; Recycled asphalt shingles; Pavement roughness; Greenhouse gases; Energy consumption (search for similar items in EconPapers)
Date: 2015
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (10)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0921344915300744
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:recore:v:104:y:2015:i:pa:p:141-151

DOI: 10.1016/j.resconrec.2015.08.014

Access Statistics for this article

Resources, Conservation & Recycling is currently edited by Ming Xu

More articles in Resources, Conservation & Recycling from Elsevier
Bibliographic data for series maintained by Kai Meng ().