EconPapers    
Economics at your fingertips  
 

Reduction of capacity and projected costs associated with seat belt installation on school buses

Saravanan Gurupackiam, Daniel S. Turner, Jay K. Lindly, Steven Jones and Elsa Tedla

Transportation Research Part A: Policy and Practice, 2014, vol. 67, issue C, 59-68

Abstract: This study examines the potential effects the installation of seat belts on school buses would have on the fleet capacity in Alabama and the resulting cost implications. The study also documents the myriad research studies and professional opinions offered on the potential safety effects of equipping school buses with safety restraints/seat belts. Four seat configurations for the school buses were analyzed. The first configuration represents the most common current bus seating configuration without seat belts, 3 seats on each side of the aisle and 12 rows (3/3-12). The physical space required for seat belt hardware may result in a loss of a row of seats and may reduce the number of students seated per row. Thus, three more configurations were studied: loss of a row of seats (3/3-11), loss of one seat per row (3/2-12), and loss of both a row of seats and a seat per row (3/2-11). The capacity for each configuration for each bus using current pupil loads was determined. The costs associated with installation of seat belts, and purchase and operation of new buses were obtained. Should school bus seat belts become mandatory in Alabama, the results obtained in this study can be used by any school system to determine the optimum configuration for their pupils, which will identify the number of additional buses that must be purchased by the school system. This study found that many of the buses that would become overloaded due to seat belt installation and the resultant loss of seating will be carrying only a few excess pupils. Transportation supervisors may be able to handle such overloads by transferring these pupils to other buses or by adjusting their bus routes to minimize purchase of new buses. Additional suggestions for handling bus overloads were offered in the body of this report.

Keywords: Seat belt; School bus; Capacity; Cost; Pupil (search for similar items in EconPapers)
Date: 2014
References: View complete reference list from CitEc
Citations: View citations in EconPapers (1)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0965856414001451
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:transa:v:67:y:2014:i:c:p:59-68

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/supportfaq.cws_home/regional
https://shop.elsevie ... _01_ooc_1&version=01

DOI: 10.1016/j.tra.2014.06.005

Access Statistics for this article

Transportation Research Part A: Policy and Practice is currently edited by John (J.M.) Rose

More articles in Transportation Research Part A: Policy and Practice from Elsevier
Bibliographic data for series maintained by Catherine Liu ().

 
Page updated 2025-03-19
Handle: RePEc:eee:transa:v:67:y:2014:i:c:p:59-68