EconPapers    
Economics at your fingertips  
 

Implementation of Microcontroller Based Distance Relay

Abubakar Isa, H. K. Verma, Abdurrahman Shuaibu and Mubarak Auwal Saleh
Additional contact information
Abubakar Isa: Sheda Science and Technology Complex, Abuja, Nigeria
H. K. Verma: Sharda University Greater Noida, India.
Abdurrahman Shuaibu: Kampala International University, Uganda.
Mubarak Auwal Saleh: Kano University of Science and Technology, Nigeria

European Journal of Electrical Engineering and Computer Science, 2018, vol. 2, issue 5

Abstract: In this project microcontroller 8051 was used for comparisons between set Impedance and calculated Impedance for based distance relay of the protection of transmission line, based on that trip signal is send to circuit breaker. The Hardware consisted of main CT and VT, auxiliary VT and CT ,BLF ,sample and hold(S/H) circuit ,multiplexer ,ADC and microcontroller 8051.In which the main CT and VT step down the current and voltage respectably passed to auxiliary CT and VT for protecting the remaining components and convert the current into voltage in the output of auxiliary CT, then passed it to band limit filter to limit the frequency for sampling hold after sampling and hold circuit the signal is passed to multiplexer then to the ADC for analogue to digital conversion, after the conversion the digital signals is passed to the 8051 microcontroller to processing the signals that is calculating the average, impedance and compare it with the set impedance (store impedance) to generate trip signal when calculate impedance is less than or equal to set impedance. The trip signal is send to circuit breaker for tripping the first zone if condition is no it go to zone second zone and check the condition if yes trip is send to circuit breaker if no it go to third zone if yes trip and jump to initial point if not it go back to initial point. The relay software has been developed and simulated using Proteus software in which signal generator, ADC, microcontroller and LEDs are used for the purpose of checking fault in transmission.

Keywords: Relay; Microcontroller; ADC; Proteus; Circuit Breaker (search for similar items in EconPapers)
Date: 2018
References: Add references at CitEc
Citations:

Downloads: (external link)
https://eu-opensci.org/index.php/ejece/article/view/19031 Abstract page (text/html)
https://eu-opensci.org/index.php/ejece/article/download/19031/11007 Full text (application/pdf)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:epw:ejece0:v:2:y:2018:i:5:id:19031

DOI: 10.24018/ejece.2018.2.5.31

Access Statistics for this article

More articles in European Journal of Electrical Engineering and Computer Science from European Open Science
Bibliographic data for series maintained by support ().

 
Page updated 2026-06-22
Handle: RePEc:epw:ejece0:v:2:y:2018:i:5:id:19031