Production and Characterization of Biochar from Almond Shells

Hamed M. El Mashad, Abdolhossein Edalati, Ruihong Zhang () and Bryan M. Jenkins
Additional contact information
Hamed M. El Mashad: Department of Biological and Agricultural Engineering, University of California Davis, Davis, CA 95616, USA
Abdolhossein Edalati: Department of Biological and Agricultural Engineering, University of California Davis, Davis, CA 95616, USA
Ruihong Zhang: Department of Biological and Agricultural Engineering, University of California Davis, Davis, CA 95616, USA
Bryan M. Jenkins: Department of Biological and Agricultural Engineering, University of California Davis, Davis, CA 95616, USA

Clean Technol., 2022, vol. 4, issue 3, 1-11

Abstract: Biomass from specialty crops, including almonds, walnuts, and numerous others, serves as an important resource for energy and materials as agricultural systems evolve towards greater sustainability and circularity in management and operations. Biochar was produced from almond shells in a laboratory furnace at temperatures between 300 and 750 °C for residence times of 30 and 90 min with moisture contents of 5% to 15% wet basis. Response surface methodology was used to optimize the biochar yield. Feedstock and product temperatures were continuously monitored throughout the experiments. In addition, larger batches of biochar were also produced in a fixed-bed pilot-scale pyrolyzer. The yield of biochar was determined as a weight fraction of the amount of oven-dry almond shells used in each experiment. Physical and chemical characteristics of biochars were evaluated. Pyrolysis temperature and time were found to be the significant parameters affecting the biochar yield, with second-order regression models derived to fit yield results. As anticipated, highest biochar yields (65%) were obtained at a pyrolysis temperature of 300 °C and a pyrolysis time of 30 min due to the limited volatilization at this short residence at low temperature affecting torrefaction of the feedstock. The average biochar yield from the fixed-bed pilot-scale experiments was 39.5% and more closely aligned with the fixed carbon from standard proximate analyses. Higher pyrolysis temperatures resulted in higher C:N ratio and pH with the highest C:N ratio of 19:1 and pH of 10.0 obtained at a pyrolysis temperature of 750 °C for 90 min. Particle density increased with the increase of pyrolysis temperature. Results of this study can aid in predicting biochar yields from almond shells under different pyrolysis conditions and determining the amount of biochar required for different applications.

Keywords: sustainability; pyrolysis; thermochemical processes; biomass valorization; adsorption; agricultural residues (search for similar items in EconPapers)
JEL-codes: Q2 Q3 Q4 Q5 (search for similar items in EconPapers)
Date: 2022
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/2571-8797/4/3/53/pdf (application/pdf)
https://www.mdpi.com/2571-8797/4/3/53/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jcltec:v:4:y:2022:i:3:p:53-864:d:905123

Access Statistics for this article

Clean Technol. is currently edited by Ms. Shary Song

More articles in Clean Technol. from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().