A Pore-Scale Investigation of Oil Contaminant Remediation in Soil: A Comparative Study of Surfactant- and Polymer-Enhanced Flushing Agents

Yu Pu, Erlong Yang (), Di Wang and Shuqian Shen ()
Additional contact information
Yu Pu: Key Laboratory of Ministry of Education for Enhancing Oil and Gas Recovery, Northeast Petroleum University, Daqing 163318, China
Erlong Yang: Key Laboratory of Ministry of Education for Enhancing Oil and Gas Recovery, Northeast Petroleum University, Daqing 163318, China
Di Wang: School of Architecture and Civil Engineering, Northeast Petroleum University, Daqing 163318, China
Shuqian Shen: Heilongjiang Provincial Key Laboratory of Thermal Utilization and Disaster Reduction of New Energy in Cold Regions, Northeast Petroleum University, Daqing 163318, China

Clean Technol., 2025, vol. 7, issue 1, 1-19

Abstract: Pore-scale remediation investigation of oil-contaminated soil is important in several environmental and industrial applications, such as quick responses to sudden accidents. This work aims to investigate the oil pollutant removal process and optimize the oil-contaminated soil remediation performance at the pore scale to find the underlying mechanisms for oil removal from soil. The conservative forms of the phase-field model and the non-Newtonian power-law fluid model are employed to track the moving interface between two immiscible phases, and oil pollutant flushing removal process from soil pores is investigated. The effects of viscosity, interfacial tension, wettability, and flushing velocity on pore-scale oil pollutant removal regularity are explored. Then, the oil pollutant removal effects of two flushing agents (surfactant system and surfactant–polymer system) are compared using an oil content prediction curve based on UV-Visible transmittance. The results show that the optimal removal efficiency is obtained for a weak water-wetting system with a contact angle of 60° due to the stronger two-phase fluid interaction, deeper penetration, and more effective entrainment flow. On the basis of the dimensionless analysis, a relatively larger flushing velocity, resulting in a higher capillary number ( Ca ) in a certain range, can achieve rapid and efficient oil removal. In addition, an appropriately low interfacial tension, rather than ultra-low interfacial intension, contributes to strengthening the oil removal behavior. A reasonably high viscosity ratio ( M ) with a weak water-wetting state plays synergetic roles in the process of oil removal from the contaminated soil. In addition, the flushing agent combined with a surfactant and polymer can remarkably enhance the oil removal efficiency compared to the sole use of the surfactant, achieving a 2.5-fold increase in oil removal efficiency. This work provides new insights into the often-overlooked roles of the pore scale in fluid dynamics behind the remediation of oil-contaminated soil via flushing agent injection, which is of fundamental importance to the development of effective response strategies for soil contamination.

Keywords: contaminated soil; oil pollutants; pore-scale flow characteristics; remediation mechanism (search for similar items in EconPapers)
JEL-codes: Q2 Q3 Q4 Q5 (search for similar items in EconPapers)
Date: 2025
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/2571-8797/7/1/8/pdf (application/pdf)
https://www.mdpi.com/2571-8797/7/1/8/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jcltec:v:7:y:2025:i:1:p:8-:d:1565507

Access Statistics for this article

Clean Technol. is currently edited by Ms. Shary Song

More articles in Clean Technol. from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().