CFD Analysis of a Buffer Tank Redesigned with a Thermosyphon Concentrator Tube

Miguel A. Gómez, Sergio Chapela, Joaquín Collazo and José L. Míguez
Additional contact information
Miguel A. Gómez: Defense University Center, Spanish Naval Academy, Plaza de España s/n 36900 Marín, Spain
Sergio Chapela: Industrial Engineering School, University of Vigo, Lagoas-Marcosende s/n 36310 Vigo, Spain
Joaquín Collazo: Industrial Engineering School, University of Vigo, Lagoas-Marcosende s/n 36310 Vigo, Spain
José L. Míguez: Industrial Engineering School, University of Vigo, Lagoas-Marcosende s/n 36310 Vigo, Spain

Energies, 2019, vol. 12, issue 11, 1-17

Abstract: This study analyzes a buffer tank simulated in both continuous operation mode and heating mode using CFD techniques. The analysis is focused in the thermal behavior of the tank, especially in parameters such as heat exchanged, heating time, and temperature distributions into the tank, in order to propose a better design. The results of the different simulations show that the tank heats water extremely slowly and extremely evenly when producing domestic hot water (DHW), which negatively affects the thermal stratification that is critical for rapidly reaching the DHW temperature. Therefore, the main problem of the tank is an inefficient heat exchange and a poor distribution of temperature. In order to overcome these operational limitations, a new design is proposed by installing a tube inside the tank that encloses the heating coil and sends hot water directly to the tank top region such that high-temperature DHW is rapidly provided, and thermal stratification is improved. Several simulations are performed with different open and closed configurations for the outlets of the inner tube. The different results show that the heating times significantly improve, and the time needed to reach the 45 °C set point temperature is reduced from 44 to 15 min. In addition, the simulations in which the opening and closing of the water outlets are regulated, the outlet DHW temperature is kept within 45–60 °C, which prevents overheating to unsafe use temperatures. Furthermore, the results of the simulation in continuous operation mode show a clear improvement of thermal stratification and an increase in the heat transmitted to the inside of the tank.

Keywords: CFD simulation; thermal stratification; heat transfer; heat storage (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2019
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/12/11/2162/pdf (application/pdf)
https://www.mdpi.com/1996-1073/12/11/2162/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:12:y:2019:i:11:p:2162-:d:237652

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().