The Influence of Freezing Temperature Storage on the Mechanical Durability of Commercial Pellets from Biomass

Arkadiusz Dyjakon and Tomasz Noszczyk
Additional contact information
Arkadiusz Dyjakon: Institute of Agricultural Engineering, Wroclaw University of Environmental and Life Sciences, 51-630 Wroclaw, Poland
Tomasz Noszczyk: Institute of Agricultural Engineering, Wroclaw University of Environmental and Life Sciences, 51-630 Wroclaw, Poland

Energies, 2019, vol. 12, issue 13, 1-13

Abstract: The interest in pellets utilization for households heating has been growing significantly in the last several years. However, the pellets need to meet certain quality requirements, including the mechanical durability (D U ) index. In the winter seasons, the pellets are very often stored in unheated in-door systems or are transported by trucks over long distances. As a result, the pellets are exposed to external weather factors, including very low temperatures (even freezing ones), which can have a negative impact on the quality parameters of the fuel. There are several parameters affecting mechanical durability, but little is known about the influence of a very low temperature on the pellet properties. The aim of this research was to analyze the influence of freezing temperature storage on the mechanical durability of commercial pellets made of different biomass. The research was carried out in accordance with the international standard for solid biofuels PN-EN ISO 17831-1:2016-02. The samples were investigated under three different conditions: after normal storage conditions (20 °C), after frozen storage conditions (−28 °C) and after the defrosting of the pellets. The results revealed that the freezing process and subsequent defrosting of the pellets only causes a small drop in their mechanical durability in comparison to the normal storage conditions. The highest mechanical durability was established for digestate pellet and pine sawdust pellet, at 99.0 ± 0.1% and 98.7 ± 0.1% respectively ( p < 0.05). The greatest change of mechanical durability was observed after the defrosting process of pellets, which in the initial stage and at the normal storage temperature were characterized by low mechanical durability. The pellets made of sunflower husk (D U = 87.4%) and coal/straw blend (D U = 96.2%) were distinguished by the highest change in their mechanical durability (ΔD U = 1.7%, p < 0.05). Based on the obtained results, it was concluded that the storage of pellets at freezing temperature does not significantly affect their mechanical durability. However, if the mechanical durability decreases, this result is related to pellets with low initial mechanical durability.

Keywords: freezing temperature; storage; pellet; biomass; mechanical durability (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2019
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (17)

Downloads: (external link)
https://www.mdpi.com/1996-1073/12/13/2627/pdf (application/pdf)
https://www.mdpi.com/1996-1073/12/13/2627/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:12:y:2019:i:13:p:2627-:d:246647

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().