Heat to H 2: Using Waste Heat for Hydrogen Production through Reverse Electrodialysis

Kjersti Wergeland Krakhella, Robert Bock, Odne Stokke Burheim, Frode Seland and Kristian Etienne Einarsrud
Additional contact information
Kjersti Wergeland Krakhella: Department of Materials Science and Engineering, Norwegian University of Science and Technology (NTNU), NO-7491 Trondheim, Norway
Robert Bock: Department of Energy and Process Engineering, Norwegian University of Science and Technology (NTNU), NO-7491 Trondheim, Norway
Odne Stokke Burheim: Department of Energy and Process Engineering, Norwegian University of Science and Technology (NTNU), NO-7491 Trondheim, Norway
Frode Seland: Department of Materials Science and Engineering, Norwegian University of Science and Technology (NTNU), NO-7491 Trondheim, Norway
Kristian Etienne Einarsrud: Department of Materials Science and Engineering, Norwegian University of Science and Technology (NTNU), NO-7491 Trondheim, Norway

Energies, 2019, vol. 12, issue 18, 1-25

Abstract: This work presents an integrated hydrogen production system using reverse electrodialysis (RED) and waste heat, termed Heat to H 2 . The driving potential in RED is a concentration difference over alternating anion and cation exchange membranes, where the electrode potential can be used directly for water splitting at the RED electrodes. Low-grade waste heat is used to restore the concentration difference in RED. In this study we investigate two approaches: one water removal process by evaporation and one salt removal process. Salt is precipitated in the thermally driven salt removal, thus introducing the need for a substantial change in solubility with temperature, which KNO 3 fulfils. Experimental data of ion conductivity of K + and NO 3 ? in ion-exchange membranes is obtained. The ion conductivity of KNO 3 in the membranes was compared to NaCl and found to be equal in cation exchange membranes, but significantly lower in anion exchange membranes. The membrane resistance constitutes 98% of the total ohmic resistance using concentrations relevant for the precipitation process, while for the evaporation process, the membrane resistance constitutes over 70% of the total ohmic resistance at 40 ? C. The modelled hydrogen production per cross-section area from RED using concentrations relevant for the precipitation process is 0.014 ± 0.009 m 3 h ? 1 (1.1 ± 0.7 g h ? 1 ) at 40 ? C, while with concentrations relevant for evaporation, the hydrogen production per cross-section area was 0.034 ± 0.016 m 3 h ? 1 (2.6 ± 1.3 g h ? 1 ). The modelled energy needed per cubic meter of hydrogen produced is 55 ± 22 kWh (700 ± 300 kWh kg ? 1 ) for the evaporation process and 8.22 ± 0.05 kWh (104.8 ± 0.6 kWh kg ? 1 ) for the precipitation process. Using RED together with the precipitation process has similar energy consumption per volume hydrogen produced compared to proton exchange membrane water electrolysis and alkaline water electrolysis, where the energy input to the Heat to H 2 -process comes from low-grade waste heat.

Keywords: hydrogen production; reverse electrodialysis; waste heat (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2019
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (6)

Downloads: (external link)
https://www.mdpi.com/1996-1073/12/18/3428/pdf (application/pdf)
https://www.mdpi.com/1996-1073/12/18/3428/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:12:y:2019:i:18:p:3428-:d:264616

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().