Three-Dimensional Geomechanical Modeling and Analysis of Refracturing and “Frac-Hits” in Unconventional Reservoirs

Shahla Feizi Masouleh, Dharmendra Kumar and Ahmad Ghassemi
Additional contact information
Shahla Feizi Masouleh: Mewbourne School of Petroleum and Geological Engineering, The University of Oklahoma, Norman, OK 73019, USA
Dharmendra Kumar: Mewbourne School of Petroleum and Geological Engineering, The University of Oklahoma, Norman, OK 73019, USA
Ahmad Ghassemi: Mewbourne School of Petroleum and Geological Engineering, The University of Oklahoma, Norman, OK 73019, USA

Energies, 2020, vol. 13, issue 20, 1-35

Abstract: Field experience has demonstrated that infill well fractures tend to propagate towards the primary well, resulting in well-to-well interference, or so-called “frac-hits”. Frac-hits are a major concern in horizontal well refracturing because they adversely affect the productivity of both wells. This paper provides a 3D geomechanical study of the problem for the first time in order to better understand frac-hits in horizontal well refracturing and its mitigating solutions. To our knowledge, this is the only refracturing study focused on fracture mechanics and within the context of coupled proroelasticity using a single model. The modeling is based on the fully coupled 3D model, GeoFrac-3D, which is capable of simulating multistage fracturing of multiple horizontal wells. The model couples pore pressure to stresses, and makes it possible to create dynamic models of fracture propagation. The modeling results show that production from production well fractures leads to a nonuniform reduction of the reservoir pore pressure around the production well and in between fractures, leading to an anisotropic decrease of the total stress, potentially resulting in stress reorientation and/or reversal. The decrease in the total stress components in the vicinity of the production fractures creates an attraction zone for infill well hydraulic fractures. The infill well fractures tend to grow asymmetrically towards the lower stress zone. The risk of frac-hits and the impact on the “parent” and “infill” well production vary according to the reservoir stress regime, in situ stress anisotropy, and production time. By optimizing well and fracture spacing, fracturing fluid viscosity, and the timing of refracturing job, frac-hit problems can be minimized. The simulation results demonstrate that the risks of frac-hits can be potentially mitigated by repressurization of the production well fractures before fracturing the infill well.

Keywords: reservoir depletion; production and infill well; frac-hits; repressurization; stress reorientation/reversal (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2020
References: View complete reference list from CitEc
Citations: View citations in EconPapers (2)

Downloads: (external link)
https://www.mdpi.com/1996-1073/13/20/5352/pdf (application/pdf)
https://www.mdpi.com/1996-1073/13/20/5352/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:13:y:2020:i:20:p:5352-:d:427823

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().