Theoretical and Numerical Study on Electrical Resistivity Measurement of Cylindrical Rock Core Samples Using Perimeter Electrodes

Ji-Won Kim, Chang-Ho Hong, Jin-Seop Kim and Song-Hun Chong
Additional contact information
Ji-Won Kim: Radioactive Waste Disposal Research Division, Korea Atomic Energy Research Institute (KAERI), Daejeon 34057, Korea
Chang-Ho Hong: Radioactive Waste Disposal Research Division, Korea Atomic Energy Research Institute (KAERI), Daejeon 34057, Korea
Jin-Seop Kim: Radioactive Waste Disposal Research Division, Korea Atomic Energy Research Institute (KAERI), Daejeon 34057, Korea
Song-Hun Chong: Department of Civil Engineering, Sunchon National University, 225 Jungang-ro, Suncheon 57922, Korea

Energies, 2021, vol. 14, issue 14, 1-11

Abstract: The estimation of hydraulic and mechanical properties of bedrock is important for the evaluation of energy-related structures, including high-level nuclear waste repositories, hydraulic fracturing wells, and gas-hydrate production wells. The hydraulic conductivity and stress–strain curves of rocks are conventionally measured through laboratory tests on cylindrical samples. Both ASTM standards for hydraulic conductivity and compressive strength involve the use of the planar bases of a cylindrical sample. Hence, an alternative test method is required for the simultaneous measurement of hydraulic conductivity and stress–strain curves. This study proposes a novel electrical resistivity estimation method using two perimeter electrodes for the estimation of hydraulic properties. The theoretical background for the perimeter electrode setup is derived and the COMSOL MultiPhysics ® finite element numerical simulation tool is employed to verify the derived theoretical equation. The accuracy of the numerical simulation tool is first validated by simulating the ASTM standard testing method for electrical resistivity. The electrical resistance values derived from the theoretical equation and numerical simulation are compared for different electrical resistivity and electrode radius. The assumed equidistant, circular equipotential surface results in a theoretical lower bound for the measured electrical resistance in the cylindrical specimen. The introduction of a phenomenological distortion factor to correct for the theoretical equipotential surface results in a good fit with the numerical simulation results. The effects of electrode length and equivalent strap electrodes were investigated to assess the applicability of the suggested method for laboratory testing. Consequently, this study presents an effective alternative theoretical assessment method for the lower bound electrical resistivity of cylindrical rock core samples under confining conditions when the installation of base electrodes is infeasible.

Keywords: electrical resistivity; cylindrical rock specimen; perimeter electrode; COMSOL Multiphysics (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2021
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/14/14/4382/pdf (application/pdf)
https://www.mdpi.com/1996-1073/14/14/4382/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:14:y:2021:i:14:p:4382-:d:598013

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().