Real Domestic Hot Water Consumption in Residential Buildings and Its Impact on Buildings’ Energy Performance—Case Study in Poland

Katarzyna Ratajczak, Katarzyna Michalak, Michał Narojczyk and Łukasz Amanowicz
Additional contact information
Katarzyna Ratajczak: Institute of Environmental Engineering and Building Installations, Poznan University of Technology, Pl. M. Sklodowskiej-Curie 5, 60-965 Poznan, Poland
Katarzyna Michalak: Students Scientific Association of Environmental Engineering, Poznan University of Technology, 60-965 Poznan, Poland
Michał Narojczyk: Students Scientific Association of Environmental Engineering, Poznan University of Technology, 60-965 Poznan, Poland
Łukasz Amanowicz: Institute of Environmental Engineering and Building Installations, Poznan University of Technology, Pl. M. Sklodowskiej-Curie 5, 60-965 Poznan, Poland

Energies, 2021, vol. 14, issue 16, 1-22

Abstract: A building’s energy consumption is assessed considering the energy required for heating, cooling, lighting, and domestic hot water (DHW). Methodologies used to calculate energy certificates in European Union countries consider hot water consumption rates per person or per heated (floor) area, giving wide-ranging values (35–88 dm 3 /person/day). Using extreme parameters, it is possible to obtain a primary energy index that meets the legal requirements, although unrealistically large proportions of domestic hot water use relative to the total energy balance of the building may marginalize the influence of other components, such as fluctuations in heating, ventilation, or lighting. In the current work, the DHW consumption of three residential buildings was measured to verify the energy consumption for hot water preparation. Investigations were conducted based on the consumption of natural gas for DHW preparation. Experimentally obtained water consumption rates were determined per m 2 of a dwelling and per person living in the building. The calculated indicators (0.85 ± 0.005 dm 3 /m 2 /day and 27.4 ± 1.4 dm 3 /person/day) were lower than those used for energy certifications of buildings. The experimentally obtained indicators were used in further theoretical energy assessments of six residential buildings. By adopting the designated indicators, the analyzed buildings met the legally required primary energy value (<70 kWh/m 2 /year) when using natural gas as a heat source. Applying more realistic DHW consumption values resulted in more accurate energy certifications.

Keywords: domestic hot water consumption; energy performance of buildings; domestic hot water; energy certification; water resources (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2021
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (7)

Downloads: (external link)
https://www.mdpi.com/1996-1073/14/16/5010/pdf (application/pdf)
https://www.mdpi.com/1996-1073/14/16/5010/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:14:y:2021:i:16:p:5010-:d:614836

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().