Optimal Shape of Non-Linear Partially Wet Annular Fins for Maximum Efficiency

Cheng-Hung Huang and Yun-Lung Chung
Additional contact information
Cheng-Hung Huang: Department of Systems and Naval Mechatronic Engineering, National Cheng Kung University, Tainan 701, Taiwan
Yun-Lung Chung: Department of Systems and Naval Mechatronic Engineering, National Cheng Kung University, Tainan 701, Taiwan

Energies, 2021, vol. 14, issue 4, 1-23

Abstract: Heat exchangers with annular finned-tube type and partially wetted condition are utilized widely in engineering systems, such as air-conditioning systems and refrigeration systems. In addition, the physical properties of fin materials should be considered as functions of temperature in reality and thus become a non-linear problem. Based on the above two conditions, an optimal partially wet annular fin design problem, with temperature-dependent thermal properties of the fin, to yield optimal fin efficiency was investigated in the present work, which has not been examined previously and it is the novelty of this study. An iterative regularization algorithm using the conjugate gradient method (CGM) is considered as the optimization tool based on the desired fin efficiency under a fixed fin volume constraint. The partially wet annular fin condition can result if the relative humidity of surrounding air is between 80 and 90%. Finally, the optimal fin shape, with the highest computed efficiency among examined fins under identical operational conditions, can be obtained. It is found that when the Biot numbers for ambient air (Bi a ) and relative humidity (φ) increased, the optimum computed fin efficiency and interfacial radius between wet and dry fin domains (r wd ) will be increased, and the estimated optimum fin shape also changed. However, the shape of optimal fin remained approximately unchanged when the Biot numbers for the inner tube (Bi i ) , the thermal conductivities of the tube (k w ) and fin (k f ) varied. It reveals that Bi i , k w and k f have an insignificant influence on the optimal shape of the annular fin in a partially wet condition.

Keywords: partially wet annular fins; non-linear design problem; conjugate gradient method (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2021
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/14/4/844/pdf (application/pdf)
https://www.mdpi.com/1996-1073/14/4/844/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:14:y:2021:i:4:p:844-:d:494325

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().