Numerical Study on the Cavitation Flow and Its Effect on the Structural Integrity of Multi-Stage Orifice

Gonghee Lee, Myungjo Jhung, Juneho Bae and Soonho Kang
Additional contact information
Gonghee Lee: Department of Regulatory Assessment, Korea Institute of Nuclear Safety, Daejeon 34142, Korea
Myungjo Jhung: Department of Nuclear Safety Research, Korea Institute of Nuclear Safety, Daejeon 34142, Korea
Juneho Bae: Department of Regulatory Assessment, Korea Institute of Nuclear Safety, Daejeon 34142, Korea
Soonho Kang: Department of Kori NPP Regulation, Korea Institute of Nuclear Safety, Daejeon 34142, Korea

Energies, 2021, vol. 14, issue 6, 1-24

Abstract: Flow leakage due to cavitation erosion occurred at the socket welding part downstream of the multi-stage orifice installed in the auxiliary feedwater (AFW) pump recirculation line of the domestic nuclear power plant (NPP). To assess the adequacy of the changed operating flow rate proposed by a domestic NPP operator as the corrective measure concerning the flow leakage in the AFW pump recirculation line, the pattern of the cavitation flow in the eight-stage orifice and the connecting pipe depending on the magnitude of the operating flow rate was predicted by using ANSYS CFX R19.1. Additionally, using ANSYS Mechanical, the structural analysis was conducted under the same operating flow rate condition used for the flow analysis, and the structural integrity was evaluated for the allowable stress. Based on the flow analysis results, it was found that the operating flow rate was the main factor to influence the cavitation behavior inside the multi-stage orifice, and cavitation flow still happened even in the vicinity of the corrected operating flow rate, so it should be necessary to fundamentally review the adequacy of the multi-stage orifice design. On the other hand, the geometric dimensions and arrangement of orifice hole position at the individual stage of the multi-stage orifice may have a significant influence on the characteristics of pressure drop and flow patterns (including cavitation). Therefore, these effects were examined by simulating an analysis model in which the hole diameter of the eighth-stage orifice was changed under the design flow rate condition. As a result of flow analysis, it was found that reducing the hole diameter in the eighth stage orifice resulted in increasing the pressure drop. In relation to the structural integrity of the eight-stage orifice and the connecting pipe, it was found that its integrity could be maintained under the design and operating flow rate conditions.

Keywords: auxiliary feedwater system; cavitation; computational fluid dynamics; in-service testing; multiphase flow; multi-stage orifice (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2021
References: View complete reference list from CitEc
Citations: View citations in EconPapers (1)

Downloads: (external link)
https://www.mdpi.com/1996-1073/14/6/1518/pdf (application/pdf)
https://www.mdpi.com/1996-1073/14/6/1518/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:14:y:2021:i:6:p:1518-:d:514123

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().