Eccentricity in Induction Machines—A Useful Tool for Assessing Its Level

Janusz Petryna, Arkadiusz Duda and Maciej Sułowicz
Additional contact information
Janusz Petryna: Department of Electrical Engineering, Polytechnic Faculty, University of Applied Sciences in Tarnow, Mickiewicza 8 Str., 33-100 Tarnow, Poland
Arkadiusz Duda: Department of Electrical Engineering, Faculty of Electrical and Computer Engineering, Cracow University of Technology, Warszawska 24 Str., 31-155 Cracow, Poland
Maciej Sułowicz: Department of Electrical Engineering, Faculty of Electrical and Computer Engineering, Cracow University of Technology, Warszawska 24 Str., 31-155 Cracow, Poland

Energies, 2021, vol. 14, issue 7, 1-26

Abstract: In the condition monitoring of induction machines operating in various industry sectors, the assessment of eccentricity is as important as the assessment of the condition of windings, bearings, mechanical vibrations or noise. The reasons for the eccentricity can be various; for example, rotor imbalance, damage or wear of the bearings, improper alignment of the rotor and the load machine and finally, assembly errors after overhaul. Disregard of this phenomenon during routine tests may result in the development of vibrations transmitted to the stator windings, faster wear of the bearings and even, in extreme cases, rubbing of the rotor against the stator surface and damage to the windings and local overheating of the machine core. On the basis of years of experience in the diagnosis of large induction machines operating in various industries, the article deals with the problem of developing reliable indicators for assessing the levels of commonly accepted types of eccentricity. Starting from field calculations and analyzing various cases of eccentricity, the methodology for determining the indicators for evaluation from the stator current spectrum is shown. The changes in the values of these indices for various cases of simultaneous occurrence of static and dynamic eccentricity are shown. The calculation results were verified in the laboratory. Also shown are three interesting cases from diagnostic practice in the evaluation of high-power machines in the industry. It has been shown that the proposed indicators are useful and enable an accurate diagnosis of levels of eccentricity.

Keywords: induction motor; diagnostic indicators; eccentricity; industry; condition monitoring; diagnostics of eccentricity; numerical coefficients; current; axial flux; spectrum; monitoring; trend (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2021
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/14/7/1976/pdf (application/pdf)
https://www.mdpi.com/1996-1073/14/7/1976/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:14:y:2021:i:7:p:1976-:d:529422

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().