A 1D Reduced-Order Model (ROM) for a Novel Latent Thermal Energy Storage System

Gargi Kailkhura, Raphael Kahat Mandel, Amir Shooshtari and Michael Ohadi
Additional contact information
Gargi Kailkhura: Advanced Heat Exchangers and Process Intensification (AHXPI) Laboratory, Department of Mechanical Engineering, University of Maryland, College Park, MD 20742, USA
Raphael Kahat Mandel: Advanced Heat Exchangers and Process Intensification (AHXPI) Laboratory, Department of Mechanical Engineering, University of Maryland, College Park, MD 20742, USA
Amir Shooshtari: Advanced Heat Exchangers and Process Intensification (AHXPI) Laboratory, Department of Mechanical Engineering, University of Maryland, College Park, MD 20742, USA
Michael Ohadi: Advanced Heat Exchangers and Process Intensification (AHXPI) Laboratory, Department of Mechanical Engineering, University of Maryland, College Park, MD 20742, USA

Energies, 2022, vol. 15, issue 14, 1-30

Abstract: Phase change material (PCM)-based thermal energy storage (TES) systems are widely used for repeated intermittent heating and cooling applications. However, such systems typically face some challenges due to the low thermal conductivity and expensive encapsulation process of PCMs. The present study overcomes these challenges by proposing a lightweight, low-cost, and low thermal resistance TES system that realizes a fluid-to-PCM additively manufactured metal-polymer composite heat exchanger (HX), based on our previously developed cross-media approach. A robust and simplified, analytical-based, 1D reduced-order model (ROM) was developed to compute the TES system performance, saving computational time compared to modeling the entire TES system using PCM-related transient CFD modeling. The TES model was reduced to a segment-level model comprising a single PCM-wire cylindrical domain based on the tube-bank geometry formed by the metal fin-wires. A detailed study on the geometric behavior of the cylindrical domain and the effect of overlapped areas, where the overlapped areas represent a deviation from 1D assumption on the TES performance, was conducted. An optimum geometric range of wire-spacings and size was identified. The 1D ROM assumes 1D radial conduction inside the PCM and analytically computes latent energy stored in the single PCM-wire cylindrical domain using thermal resistance and energy conservation principles. The latent energy is then time-integrated for the entire TES, making the 1D ROM computationally efficient. The 1D ROM neglects sensible thermal capacity and is thus applicable for the low Stefan number applications in the present study. The performance parameters of the 1D ROM were then validated with a 2D axisymmetric model, typically used in the literature, using commercially available CFD tools. For validation, a parametric study of a wide range of non-dimensionalized parameters, depending on applications ranging from pulsed-power cooling to peak-load shifting for building cooling application, is included in this paper. The 1D ROM appears to correlate well with the 2D axisymmetric model to within 10%, except at some extreme ranges of a few of the non-dimensional parameters, which lead to the condition of axial conduction inside the PCM, deviating from the 1D ROM.

Keywords: phase change materials; encapsulation; latent thermal energy storage; analytical; reduced-order model; radial conduction; cylindrical geometry; tube bank; transient heat transfer; additive manufacturing (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2022
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/15/14/5124/pdf (application/pdf)
https://www.mdpi.com/1996-1073/15/14/5124/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:15:y:2022:i:14:p:5124-:d:862682

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().