 Design of a More Efficient Rotating-EM Energy Floor with Lead-Screw and Clutch MechanismThitima Jintanawan,
Gridsada Phanomchoeng (),
Surapong Suwankawin,
Weeraphat Thamwiphat,
Varinthorn Khunkiat and
Wasu Watanasiri
Energies, 2022, vol. 15, issue 18, 1-18 Abstract: There is an interest in harvesting energy from people’s footsteps in crowded areas to power smart electronic devices with low consumption. The average power consumption of these devices is approximately 10 μW. The energy from our footsteps is green and free, because walking is a routine activity in everyday life. The energy floor is one of the most efficient pieces of equipment in vibration-based energy harvesting. The paper aims to improve the previous design of the energy floor—called Genpath—which uses a rotational electromagnetic (EM) technique to generate electricity from human footsteps. The design consists of two main parts of (1) the EM generator, including the lead-screw mechanism for translation-to-rotation conversion, and (2) the Power Management and Storage (PMS) circuit. The improvement was focused on the part of the EM generator. A thorough investigation of the design components reveals that the EM generator shaft in the previous Genpath design cannot continuously rotate when the floor-tile reaches the bottom end, resulting in no energy gain. Therefore, a one-way clutch is implemented to the system to disengage the generator shaft from the lead-screw motion when the floor-tile reaches the allowable displacement. During the disengagement, the EM generator shaft still proceeds with a free rotation and could generate more power. In our analysis, the dynamic model of the electro-mechanical systems with the one-way clutch was successfully developed and used to predict the energy performances of the VEH floors and fine-tune the design parameters. The analytical result is shown that the spring stiffness mainly affects the force transmitted to the EM generator, and then the induced voltage and power of the generator, thus, the value of the stiffness is one of the critical design parameters to optimize. Finally, the new prototype consisting of 12-V-DC generator, mechanisms of lead-screw and clutch, as well as coil springs with the optimal stiffness of 1700 N/m was built and tested. The average energy produced by the new prototype is 3637 mJ (or average power of 3219 mW), per footstep which is 2935 mJ greater than that of the previous design. Moreover, to raise the social awareness about energy usage, the sets of Genpath have been used to organize an exhibition, “Genpath Empower our Journey”. The people who stroll forward on the paths can realize how much energy they gain from their footsteps. Keywords: energy harvesting; electromagnetic generator; energy floor tile; power management system; footstep energy harvesting; piezoelectric; energy harvesting paver; clutch (search for similar items in EconPapers) Downloads: (external link) Related works: Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:15:y:2022:i:18:p:6539-:d:909370 Access Statistics for this article Energies is currently edited by Ms. Agatha Cao More articles in Energies from MDPI |
Is your work missing from RePEc? Here is how to contribute.
Questions or problems? Check the EconPapers FAQ or send mail to .
EconPapers is hosted by the
School of Business at Örebro University.