Nitrogen Migration and Conversion in Chars from Co-Pyrolysis of Lignocellulose Derived Pyrolysis Model Compounds and Urea-Formaldehyde Resin Adhesive

Mengyao Guo, Shu Yu, Shu Zhang, Juntao Wei (), Wenran Gao, Weina Bao, Lei Shi, Hong Zhang and Deliang Xu ()
Additional contact information
Mengyao Guo: Joint International Research Laboratory of Biomass Energy and Materials, Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
Shu Yu: Joint International Research Laboratory of Biomass Energy and Materials, Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
Shu Zhang: Joint International Research Laboratory of Biomass Energy and Materials, Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
Juntao Wei: Joint International Research Laboratory of Biomass Energy and Materials, Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
Wenran Gao: Joint International Research Laboratory of Biomass Energy and Materials, Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
Weina Bao: Shandong Yancon Guo Tuo Science & Engineering Co., Ltd., Jinan 250000, China
Lei Shi: Joint International Research Laboratory of Biomass Energy and Materials, Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
Hong Zhang: Joint International Research Laboratory of Biomass Energy and Materials, Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
Deliang Xu: Joint International Research Laboratory of Biomass Energy and Materials, Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China

Energies, 2022, vol. 15, issue 19, 1-11

Abstract: In thermal conversion utilization, nitrogen-rich biomass such as waste wood-based panels will release a large amount of NO x into the atmosphere, causing serious harm to the surroundings. By means of co-pyrolysis, N in waste wood-based panels can be fixed in chars instead of discharging into the atmosphere in the form of volatile matter, which can reduce NO x emission and lay a foundation for the preparation of nitrogen-rich carbon materials with high added value. As the most commonly used adhesive in the production of wood-based panels, urea-formaldehyde resin adhesive (UF) is the main nitrogen source in waste wood-based panels. Therefore, the purpose of this paper is to explore the effects of glucose, ethyl maltol and 2,5-dimethyl-4-hydroxy-3(2H)-furanone (DMHF) on nitrogen migration and conversion during UF pyrolysis by adjusting the different proportions of model compounds and UF. Thermogravimetric analysis showed that ethyl maltol and DMHF had lower thermal stability and the pyrolysis process was concentrated in the range of 90–168 °C, which does not coincide with the mass loss temperature of UF. UF can promote the pyrolysis of these three model compounds at the initial stage to some extent. The elemental analysis showed that the N retention in co-pyrolysis chars increased in varying degrees with the increase of the addition of model compounds; the nitrogen retention in chars of glucose-UF, ethyl maltol-UF and DMHF-UF increased by 28.47%, 3.48% and 16.45% with the increase of the model compound content from 50% to 90%, respectively. The XPS results showed that the relative content of N-6 in chars increased with the increase of ethyl maltol content, and the relative content of N-5 in chars increased with the increased addition of DMHF. Glucose had little effect on the distribution of N-functional groups in chars.

Keywords: wood; thermal conversion; model compounds; urea-formaldehyde resin adhesive; char; nitrogen migration and transformation (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2022
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/15/19/7221/pdf (application/pdf)
https://www.mdpi.com/1996-1073/15/19/7221/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:15:y:2022:i:19:p:7221-:d:931097

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().