The Transient Thermal Disturbance in Surrounding Formation during Drilling Circulation

Minsoo Jang, Troy S. Chun and Jaewoo An
Additional contact information
Minsoo Jang: Department of Petroleum Engineering, Texas A&M University, College Station, TX 77843, USA
Troy S. Chun: Department of Petroleum Engineering, Texas A&M University, College Station, TX 77843, USA
Jaewoo An: Department of Energy Science and Engineering, Stanford University, Stanford, CA 94305, USA

Energies, 2022, vol. 15, issue 21, 1-16

Abstract: The injecting drilling mud is typically at the ambient temperature, relatively much colder than the deep formation, inducing a cooling effect in the formation. Although the cooled formation temperature gradually returns to its original temperature after drilling circulation, the recovery speed is slow due to low thermal diffusivity. Considering that any well tests begin in a short period after drilling ends, temperature recovery is not fully achieved before the tests. It means that the measured temperature of producing fluid is not that of the actual formation, significantly impairing the robustness of the subsequent thermal applications. Furthermore, there has been no quantified concept of thermal disturbance in the formation and its analysis. In this work, a proposed numerical transient heat transfer model computes the radial temperature in the drill pipe, annulus, and formation. The concept of quantifying thermal disturbance, named thermally disturbed radius (TDR), indicates how long the thermal disturbance occurs radially in the formation. The TDR increases with the more significant temperature difference between circulating fluid and formation. Thus, the TDR appears to be the largest at the bottom-hole depth. In the sensitivity of TDR of various operational parameters, circulation time (i.e., drilling time) is the most influential factor. Meanwhile, the other parameters do not significantly affect TDR: circulation rate, injecting mud temperature, and mud density. The sensitivity analysis concludes that as long as the operators control the drilling time, the uncertainty of the measured temperature after drilling can be manageable without limiting any other operational parameters.

Keywords: drilling circulation cooling; near-wellbore cooling; thermally disturbed radius; uncertainty of temperature (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2022
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (1)

Downloads: (external link)
https://www.mdpi.com/1996-1073/15/21/8052/pdf (application/pdf)
https://www.mdpi.com/1996-1073/15/21/8052/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:15:y:2022:i:21:p:8052-:d:957476

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().