Tracer Gas Test and CFD Analysis of Semiconductor Gas Box for Flammable Gas Leakage

Shin-eui Kim, Kwangho Lee, Chankyu Kang () and Seungho Jung ()
Additional contact information
Shin-eui Kim: Department of Environmental Engineering, Ajou University, Suwon 16499, Korea
Kwangho Lee: Department of Environmental Engineering, Ajou University, Suwon 16499, Korea
Chankyu Kang: School of Social Safety System Engineering, Research Center for Safety and Health, Hankyong National University, Anseong 17579, Korea
Seungho Jung: Department of Environmental Engineering, Ajou University, Suwon 16499, Korea

Energies, 2022, vol. 15, issue 21, 1-15

Abstract: Semiconductor manufacturing is performed through unit processes that use various chemicals and facilities. In particular, flammable gases, such as H 2 , NH 3 , and CH 4 , are used, and there is a risk of explosion when such gases leak. In this study, computational fluid dynamics (CFD) simulation and a “tracer gas test” according to the SEMI (Semiconductor Equipment and Materials International) S6 Environmental, Health, and Safety Guideline for Exhaust Ventilation of Semiconductor Manufacturing Equipment specification were performed during the leakage of hydrogen, a highly flammable gas used in the etching process of a gas box in the semiconductor industry. The CFD simulation was conducted to investigate the safety of semiconductor production facilities in relation to the explosion risk. Flow analysis was performed for the interior of a gas box used in the etching process. A steady-state analysis was performed to predict the concentration range of the explosion limit in the case of continuous hydrogen gas leakage. The interior of the gas box used in the simulation was modeled, and the ventilation flow rate, which has a significant impact on the leakage gas concentration distribution, obtained from experiments was used. The lower flammability limit (LFL) value of the leaked gas was 4% based on H 2 , and LFL/4 (25% of the LFL) was analyzed as the explosion limit concentration according to the acceptance criteria of the SEMI S6 tracer gas test. To validate the CFD simulation, a tracer gas test was performed according to SEMI S6. A mixture of hydrogen (5%) and nitrogen (95%) was used as the tracer gas. The flow rate was controlled by a gas regulator valve and measured using an Aalborg mass flow meter. The measured concentration of the tracer gas was calculated using the equivalent release concentration, which was calculated when 100% of the hydrogen was released, and the risk was assessed by comparing it with the LFL/4 of H 2 .

Keywords: semiconductor industry; gas cabinet; hydrogen explosion; CFD (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2022
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/15/21/8166/pdf (application/pdf)
https://www.mdpi.com/1996-1073/15/21/8166/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:15:y:2022:i:21:p:8166-:d:960558

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().