Simulation Study of the Swirl Spray Atomization of a Bipropellant Thruster under Low Temperature Conditions

Haifu Li, Jihong Feng, Xinyue Cao, Zhen Zhang, Hongbo Liang and Yusong Yu ()
Additional contact information
Haifu Li: School of Mechanical and Electronic Control Engineering, Beijing Jiaotong University, Beijing 100044, China
Jihong Feng: School of Mechanical and Electronic Control Engineering, Beijing Jiaotong University, Beijing 100044, China
Xinyue Cao: School of Mechanical and Electronic Control Engineering, Beijing Jiaotong University, Beijing 100044, China
Zhen Zhang: School of Mechanical and Electronic Control Engineering, Beijing Jiaotong University, Beijing 100044, China
Hongbo Liang: China North Engine Research Institute, Tianjin 300400, China
Yusong Yu: School of Mechanical and Electronic Control Engineering, Beijing Jiaotong University, Beijing 100044, China

Energies, 2022, vol. 15, issue 23, 1-13

Abstract: The spray atomization of an injector significantly influences the performance and working life span of a bipropellant thruster of a spacecraft. Deep space exploration requires the thruster to be able to operate reliably at a low temperature range from −40 °C to 0 °C, so the effect of low temperature conditions on the atomization characteristics of injector spray is motivated to be comprehensively investigated. To study the swirl atomization characteristics of MMH (methylhydrazine), which is more difficult to atomize than NTO (nitrogen tetroxide), numerical simulations were conducted, employing the methods of VOF (volume of fluid) and LES (large eddy simulation) under low temperature conditions. The physical model with a nozzle size of 0.5 mm and boundary conditions with a velocity inlet of 3.89 m/s both follow the actual operation of thrusters. The development of spray atomization at low temperatures was observed through parametric comparisons, such as spray velocity, liquid total surface area, droplet particle size distribution, spray cone angle and breakup distance. When the temperature decreased from 20 °C to −40 °C at the same condition of flowrate inlet, those atomization characteristics of MMH propellant vary following these rules: the spray ejection velocity of MMH is significantly reduced by 7.7%, and gas-liquid disturbance sequentially decreases; the liquid film development is more stable, with a negative influence on atomization quality, causing difficulties for primary and secondary breakup, so the total surface area of droplets also decreases by 6.4%; the spatial distribution characteristics, spray cone angle and breakup distance vary less than 5%. Therefore, the low temperature condition can directly lower the combustion efficiency of thrusters with obvious performance degradation, but there are no significant changes in the propellant mixing and liquid film cooling. It is concluded that the bipropellant thruster can reliably work at low temperatures around −40 °C for deep space probe operation.

Keywords: thrusters; MMH; low temperature; atomization characteristics; VOF; LES (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2022
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/15/23/8852/pdf (application/pdf)
https://www.mdpi.com/1996-1073/15/23/8852/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:15:y:2022:i:23:p:8852-:d:982053

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().