Performance of Cathodes Fabricated from Mixture of Active Materials Obtained from Recycled Lithium-Ion Batteries

Hammad Al-Shammari and Siamak Farhad
Additional contact information
Hammad Al-Shammari: Advanced Energy & Manufacturing Laboratory, Department of Mechanical Engineering, University of Akron, Akron, OH 44325, USA
Siamak Farhad: Advanced Energy & Manufacturing Laboratory, Department of Mechanical Engineering, University of Akron, Akron, OH 44325, USA

Energies, 2022, vol. 15, issue 2, 1-16

Abstract: The cathode performance of lithium-ion batteries (LIBs) fabricated from recycled cathode active materials is studied for three scenarios. These scenarios are based on the conditions for separation of different cathode active materials in recycling facilities during the LIB’s recycling process. In scenario one, the separation process is performed ideally, and the obtained pure single cathode active material is used to make new LIBs after regeneration. In scenario two, the separation of active materials is performed with efficiencies of less than 100%, which is the actual case in the recycling process. In this scenario, a single cathode active material that contains a little of the other types of cathode active materials is used to make new LIBs after the materials’ regeneration. In scenario three, the separation has not been performed during the recycling process. In this scenario, all types of cathode active materials are regenerated together, and a mixture is used to make new LIBs. The studies are performed through modeling and computer simulation, and several experiments are conducted for validation purposes. The cathode active materials that are studied are the five commercially available cathodes made of LiMn 2 O 4 (LMO), LiCoO 2 (LCO), LiNi x Mn y Co (1−x−y) O 2 (NMC), LiNi x Co y Al (1−x−y) O 2 (NCA), and LiFePO 4 (LFP). The results indicate that the fabrication of new LIBs with a mixture of cathode active materials is possible when cathode active materials are not ideally separated from each other. However, it is recommended that the separation process is added to the recycling process, at least for the separation of LFP or reducing its amount in the cathode active materials mixture. This is because of the difference of the voltage level of LFP compared to the other studied active materials for cathodes.

Keywords: lithium-ion battery; recycling; cathode performance; mixture of cathode active materials; separation of cathode active materials (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2022
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (1)

Downloads: (external link)
https://www.mdpi.com/1996-1073/15/2/410/pdf (application/pdf)
https://www.mdpi.com/1996-1073/15/2/410/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:15:y:2022:i:2:p:410-:d:719153

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().