Biogas Production from Arthrospira platensis Biomass

Małgorzata Hawrot-Paw (), Adam Koniuszy, Patryk Ratomski, Magdalena Sąsiadek and Andrzej Gawlik
Additional contact information
Małgorzata Hawrot-Paw: Department of Renewable Energy Engineering, West Pomeranian University of Technology in Szczecin, Pawla VI 1, 71-459 Szczecin, Poland
Adam Koniuszy: Department of Renewable Energy Engineering, West Pomeranian University of Technology in Szczecin, Pawla VI 1, 71-459 Szczecin, Poland
Patryk Ratomski: Department of Renewable Energy Engineering, West Pomeranian University of Technology in Szczecin, Pawla VI 1, 71-459 Szczecin, Poland
Magdalena Sąsiadek: Department of Renewable Energy Engineering, West Pomeranian University of Technology in Szczecin, Pawla VI 1, 71-459 Szczecin, Poland
Andrzej Gawlik: Department of Renewable Energy Engineering, West Pomeranian University of Technology in Szczecin, Pawla VI 1, 71-459 Szczecin, Poland

Energies, 2023, vol. 16, issue 10, 1-12

Abstract: Biogas production by fermentation is a relatively low-cost and simple method for the transformation of a substrate into an energy carrier with a wide range of possible applications. The aim of this study was to determine the potential of Arthrospira platensis biomass as a source of bioenergy produced during anaerobic digestion (AD). The studies were carried out on a fractional-technical scale. Biogas yield and composition were analyzed as a function of the amount of biomass subjected to anaerobic digestion, the substrate dosing frequency in the digester and the use of biomass pre-hydrolysis in the mixing compartment. The energy efficiency of the process was also compared for each sample. In addition, a biomass conversion power index was developed and determined. It was found that A. platensis biomass had significant energy potential, and the amount of biogas obtained and its calorific value changed depending on the applied treatments. The maximum cumulative biogas production was 505 L kg −1 volatile solids (VS), while the maximum average methane (CH 4 ) content was 67.32%. A two-fold increase in the organic loading rate from 1 g VS·L −1 volatile solids (VS) to 2 g VS·L −1 had a positive effect on methane concentration. The highest energy efficiency of the AD process was obtained for 2 g VS·L −1 , with a single feedstock input into the digester, in a single-stage process (2/s/-), while the highest conversion power ratio was for a feedstock of 1 g VS·L −1 , under the same process conditions (1/s/-). Moreover, the energy efficiency of the microalgae fermentation process obtained in the study is higher compared to conventional substrates used in biogas plants. This energy analysis can support the selection of cogeneration power engines in a biogas plant and help to determine the potential output of the biogas plant, especially with varying energy and heat demand.

Keywords: Arthrospira platensis; microalgae; biomass; biogas; bioenergy; power index (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2023
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/16/10/3971/pdf (application/pdf)
https://www.mdpi.com/1996-1073/16/10/3971/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:16:y:2023:i:10:p:3971-:d:1142295

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().