Prediction of Friction Factor and Heat Transfer Coefficient for Single-Phase Forced Convection Inside Microfin Tubes

Luisa Rossetto and Andrea Diani ()
Additional contact information
Luisa Rossetto: Department of Industrial Engineering, University of Padova, 35131 Padova, Italy
Andrea Diani: Department of Industrial Engineering, University of Padova, 35131 Padova, Italy

Energies, 2023, vol. 16, issue 10, 1-15

Abstract: Microfin tubes are widely used to enhance heat transfer in heat exchangers in order to reduce volumes, costs and refrigerant charge. Much experimental work has been published for the flow of liquids, while some experimental work is available for the flow of gases for the chemical, refrigeration and air conditioning industry. This work reviews the literature and presents new experimental friction factors for the flow of the superheated vapor of R1234ze(E) in a 5 mm outside diameter microfin tube. The authors have also collected an extensive data bank of heat transfer coefficients (around 648 points from different research laboratories) and friction factors (around 536 points), covering 45 different geometries of inner finned tubes. After comparing the predictions from available correlations with experimental data, the present paper suggests the best performing equations for the calculation of the friction factor and of the Nusselt number during forced convection flow of liquids and gases. The suggested model for friction factor estimates the experimental values with a relative and absolute deviation of −0.3% and 7.9%, respectively, whereas the suggested model for the heat transfer coefficient predicts the experimental data bank with a relative and absolute deviation of −3.3% and 13.9%, respectively. The validity range of the two correlations is extremely wide, covering microfin tubes with diameters from 2.6 mm to 24.4 mm, and Reynolds number from about approximately 1000 to 300,000 for the friction factor, and from 3000 to 1,000,000 for the heat transfer coefficient.

Keywords: microfin tube; high-fin tube; single-phase; forced convection; friction; heat transfer coefficient (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2023
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/16/10/4053/pdf (application/pdf)
https://www.mdpi.com/1996-1073/16/10/4053/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:16:y:2023:i:10:p:4053-:d:1145671

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().