An In-Depth Analysis of Strength and Stiffness Variability in 3D-Printed Sandstones: Implications for Geomechanics

Angel Sanchez-Barra (), Gonzalo Zambrano-Narvaez and Rick Chalaturnyk
Additional contact information
Angel Sanchez-Barra: Department of Civil and Environmental Engineering, University of Alberta, Edmonton, AB T6G 1H9, Canada
Gonzalo Zambrano-Narvaez: Department of Civil and Environmental Engineering, University of Alberta, Edmonton, AB T6G 1H9, Canada
Rick Chalaturnyk: Department of Civil and Environmental Engineering, University of Alberta, Edmonton, AB T6G 1H9, Canada

Energies, 2023, vol. 16, issue 14, 1-12

Abstract: Natural rocks are highly heterogeneous due to various geological processes that constantly alter their properties. The accumulation, deposition, and cementation of mineral and organic particles continuously modify the spatial characteristics of rock properties. Property variability or anisotropy is commonly observed in most rock types and influences strength, transport, and thermal conductivity behavior. This unpredictability presents a significant challenge for laboratory testing. Binder-jet additive manufacturing (3D printing) has emerged as a valuable technology for characterizing rock properties in geoscience and engineering. This study proposes a novel methodology to evaluate the variability and repeatability of mechanical properties of 3D-printed sandstones during binder-jet additive manufacturing. The mechanical properties were analyzed statistically for samples located in various parts of the 3D printer build volume. The results showed that the 3D-printed sandstones exhibited significant variations in their strength and stiffness properties when measured from samples produced within the same build volume during binder-jet additive manufacturing. The uniaxial compressive strength (UCS) varied from 23 to 38 MPa, with an average value of 29 MPa. Young’s modulus, on the other hand, ranged from 1.5 to 4.05 GPa, with an average value of 2.33 GPa. The variability of the mechanical properties, quantified by the standard deviation, decreased when the entire population of 3D-printed sandstones was divided into smaller samples situated at different elevations of the build platform. These findings offer valuable insights into improving the reliability and predictability of 3D-printed sandstone properties, a critical factor for various applications in fields like petroleum engineering and construction.

Keywords: binder-jet additive manufacturing; 3D-printed sandstones; variability; uniaxial compressive strength; property anisotropy; geomechanics (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2023
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/16/14/5406/pdf (application/pdf)
https://www.mdpi.com/1996-1073/16/14/5406/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:16:y:2023:i:14:p:5406-:d:1195130

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().