Study of the Variation of Fuel Pressure to Improve Spraying and the Range of the Injection Jet

Vicente Rojas-Reinoso (), Stalin Duque-Escobar, Christian Guapulema-Guapulema and José Antonio Soriano
Additional contact information
Vicente Rojas-Reinoso: Grupo de Ingeniería Automotriz, Movilidad y Transporte (GiAUTO), Carrera de Ingeniería Automotriz-Campus Sur, Universidad Politécnica Salesiana, Quito 170702, Ecuador
Stalin Duque-Escobar: Grupo de Ingeniería Automotriz, Movilidad y Transporte (GiAUTO), Carrera de Ingeniería Automotriz-Campus Sur, Universidad Politécnica Salesiana, Quito 170702, Ecuador
Christian Guapulema-Guapulema: Grupo de Ingeniería Automotriz, Movilidad y Transporte (GiAUTO), Carrera de Ingeniería Automotriz-Campus Sur, Universidad Politécnica Salesiana, Quito 170702, Ecuador
José Antonio Soriano: Instituto de Investigación Aplicada a la Industria Aeronáutica, Escuela de Ingeniería Industrial y Aeroespacial, Campus de Excelencia Internacional en Energía y Medioambiente, Universidad de Castilla-La Mancha, Av. Carlos III, s/n, 45071 Toledo, Spain

Energies, 2023, vol. 16, issue 14, 1-20

Abstract: The current study is focused on how varying injection pressure in the fuel supply system of multi-point injection systems can improve fuel atomization and injection jet range. The aim is to achieve a more efficient mix dosage, thus improving combustion and reducing exhaust emissions. In addition, it is intended to develop a characterization of the injection actuators, specifically the injectors, through a series of tests in which the injector pressure, engine speed and injection pulse are modified. To carry out these tests, a heuristic testing technique, like the empirical approach, was implemented, and a mobile device was used to capture the spray frames of the injectors. These data were then used to generate a correlation model between injection and spray angles, considering 0.5 bar pressure variation intervals within the established ranges. This approach made it possible to visualize and record the behavior of the spray in the injector, including the spray angle, the injected fuel flow rate and the working pressure during the operation process. Following the guidelines established in the proposed methodology, a significant result was obtained by varying the pressure at 5 bar and with an injection pulse of 2 ms. In this case, a flow reduction of 66 mL of the injected fluid was achieved, which corresponds to a significant reduction in fuel consumption. Additionally, a spray angle of 10.48° was observed with optimized atomization. These results were verified on vehicles with similar injection systems by testing on the GT-600-PRO injection test bench. In summary, this study shows that by varying the injection pressure and optimizing other parameters, it is possible to achieve a significant reduction in fuel consumption and improve fuel atomization in multipoint injection systems. These findings have a significant impact on the Ecuadorian vehicle fleet and provide a scientific approach to improving fuel efficiency and performance.

Keywords: multi-point injection systems; injection jet; pressure variation; injection strategies; heuristic assay; spray angle; injection angle; dosage (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2023
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/16/14/5472/pdf (application/pdf)
https://www.mdpi.com/1996-1073/16/14/5472/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:16:y:2023:i:14:p:5472-:d:1197304

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().