Development of a Numerical Simulation Methodology for PCM-Air Heat Exchangers Used in Decentralised Façade Ventilation Units

Beata Galiszewska () and Ewa Zender-Świercz
Additional contact information
Beata Galiszewska: Department of Building Physics and Renewable Energy, Faculty of Environmental Engineering, Geomatics and Renewable Energy, Kielce University of Technology, 25-314 Kielce, Poland
Ewa Zender-Świercz: Department of Building Physics and Renewable Energy, Faculty of Environmental Engineering, Geomatics and Renewable Energy, Kielce University of Technology, 25-314 Kielce, Poland

Energies, 2023, vol. 16, issue 15, 1-15

Abstract: This paper presents the development of a methodology for using simulation to test decentralised façade ventilation systems with PCM exchangers and its validation with experimental data. Two approaches were compared to simulate the operation of an exchanger filled with phase-change material. In Method A, the geometry consisted of an air domain and a phase-change material domain, located in the cylinders of the exchanger. In this method, the phase transition was not modelled, but the specific heat was made temperature-dependent, wherein within the limits of the melting point, the specific heat is increased to a level that mimics the amount of latent heat from melting and solidification of the phase-change material. In Method B, the geometry consisted only of the air domain, and the temperature was set on the cylinder wall surfaces at each time step using UDFs. When comparing the methods, the temperature difference at the individual measuring points was no greater than 1 K and the resulting exchanger efficiencies did not differ by more than 5%. It was noted that when the phase-change material was modelled in the software with Method A, the results provided better representation of the values obtained in the experiment. Validation of the models was carried out by comparing the experimental results from the real tests with the simulation results of methods A and B. It demonstrated that both models correctly reflected the operation of the exchanger, and that the efficiency results achieved did not differ by more than 6% compared to the experiment. A comparison of supply temperatures and exchanger efficiencies with numerical simulations using two methods is presented. Visual comparison of the temperature distribution in the flowing air and the temperature distribution on the cylinder walls is also presented. This article adds to existing scientific knowledge of computer simulation of exchangers used in façade ventilation units with phase-change material.

Keywords: ventilation; PCM; heat transfer; façade ventilation; heat exchanger (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2023
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/16/15/5610/pdf (application/pdf)
https://www.mdpi.com/1996-1073/16/15/5610/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:16:y:2023:i:15:p:5610-:d:1202425

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().