Estimation of 3D Permeability from Pore Network Models Constructed Using 2D Thin-Section Images in Sandstone Reservoirs

Chengfei Luo, Huan Wan, Jinding Chen, Xiangsheng Huang, Shuheng Cui, Jungan Qin, Zhuoyu Yan, Dan Qiao and Zhiqiang Shi ()
Additional contact information
Chengfei Luo: CNOOC Central Laboratory, CNOOC EnerTech-Drilling & Production Co., Zhanjiang 524057, China
Huan Wan: CNOOC Central Laboratory, CNOOC EnerTech-Drilling & Production Co., Zhanjiang 524057, China
Jinding Chen: CNOOC Central Laboratory, CNOOC EnerTech-Drilling & Production Co., Zhanjiang 524057, China
Xiangsheng Huang: CNOOC Central Laboratory, CNOOC EnerTech-Drilling & Production Co., Zhanjiang 524057, China
Shuheng Cui: CNOOC Central Laboratory, CNOOC EnerTech-Drilling & Production Co., Zhanjiang 524057, China
Jungan Qin: CNOOC Central Laboratory, CNOOC EnerTech-Drilling & Production Co., Zhanjiang 524057, China
Zhuoyu Yan: CNOOC Central Laboratory, CNOOC EnerTech-Drilling & Production Co., Zhanjiang 524057, China
Dan Qiao: State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation & Institute of Sedimentary Geology, Chengdu University of Technology, Chengdu 610059, China
Zhiqiang Shi: State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation & Institute of Sedimentary Geology, Chengdu University of Technology, Chengdu 610059, China

Energies, 2023, vol. 16, issue 19, 1-17

Abstract: Using thin-section images to estimate core permeability is an economical and less time-consuming method for reservoir evaluation, which is a goal that many petroleum developers aspire to achieve. Although three-dimensional (3D) pore volumes have been successfully applied to train permeability models, it is very expensive to carry out. In this regard, deriving permeability from two-dimensional (2D) images presents a novel approach in which data are fitted directly on the basis of pore-throat characteristics extracted from more cost-effective thin sections. This work proposes a Fluid–MLP workflow for estimating 3D permeability models. We employed DIA technology combined with artificial lithology and pore classification to calculate up to 110 characteristic parameters of the pore-throat structure on the basis of 2D rock cast thin sections. The MLP network was adopted to train the permeability prediction model, utilizing these 110 parameters as input. However, the accuracy of the conventional MLP network only reached 90%. We propose data preprocessing using fluid flow simulations to improve the training accuracy of the MLP network. The fluid flow simulations involve generating a pore network model based on the 2D pore size distribution, followed by employing the lattice Boltzmann method to estimate permeability. Subsequently, six key structural parameters, including permeability calculated by LBM, pore type, lithology, two-dimensional porosity, average pore–throat ratio, and average throat diameter, were fed into the MLP network for training to form a new Fluid–MLP workflow. Comparing the results predicted using this new Fluid–MLP workflow with those of the original MLP network, we found that the Fluid–MLP network exhibited superior predictive performance.

Keywords: pore network model; lattice Boltzmann; fluid simulation; pore throat characteristics; MLP network (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2023
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/16/19/6976/pdf (application/pdf)
https://www.mdpi.com/1996-1073/16/19/6976/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:16:y:2023:i:19:p:6976-:d:1254710

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().