Hydrogen Cooling of Turbo Aggregates and the Problem of Rotor Shafts Materials Degradation Evaluation

Alexander I. Balitskii (), Andriy M. Syrotyuk, Maria R. Havrilyuk, Valentina O. Balitska, Valerii O. Kolesnikov and Ljubomyr M. Ivaskevych
Additional contact information
Alexander I. Balitskii: Department of Strength of the Materials and Structures in Hydrogen-Containing Environments, Karpenko Physico-Mechanical Institute, National Academy of Sciences of Ukraine, 5 Naukova Str., 79601 Lviv, Ukraine
Andriy M. Syrotyuk: Department of Strength of the Materials and Structures in Hydrogen-Containing Environments, Karpenko Physico-Mechanical Institute, National Academy of Sciences of Ukraine, 5 Naukova Str., 79601 Lviv, Ukraine
Maria R. Havrilyuk: Department of Strength of the Materials and Structures in Hydrogen-Containing Environments, Karpenko Physico-Mechanical Institute, National Academy of Sciences of Ukraine, 5 Naukova Str., 79601 Lviv, Ukraine
Valentina O. Balitska: Department of Physics and Chemistry of Combustion, Lviv State University of Life Safety, 35 Kleparivska, 79000 Lviv, Ukraine
Valerii O. Kolesnikov: Department of Strength of the Materials and Structures in Hydrogen-Containing Environments, Karpenko Physico-Mechanical Institute, National Academy of Sciences of Ukraine, 5 Naukova Str., 79601 Lviv, Ukraine
Ljubomyr M. Ivaskevych: Department of Strength of the Materials and Structures in Hydrogen-Containing Environments, Karpenko Physico-Mechanical Institute, National Academy of Sciences of Ukraine, 5 Naukova Str., 79601 Lviv, Ukraine

Energies, 2023, vol. 16, issue 23, 1-26

Abstract: Changes in the properties of 38KhN3MFA steel, from which the rotor shaft is made, were investigated by comparing the hardness of the shaft surface and hydrogen concentration in the chips and analyzing changes in the morphology of the chips under the influence of various factors. The microstructures obtained from the surface of the rotor shaft samples are presented, and histograms reflecting the parameters of the structural components are constructed. An abbreviated diagram of the “life cycle” of the turbine rotor shaft is given. It was found that, during long-term operation (up to 250 thousand hours), the hardness of the rotor shaft surface decreases from 290 HB to 250 HB. It was recorded that, in the microstructure of the shaft during 250 thousand hours of operation, the amount of cementite decreased from 87% to 62%, and the proportion of free ferrite increased from 5% to 20%. The average values of ferrite microhardness decreased from 1.9 GPa to 1.5 GPa. An increase in the content of alloying elements in carbides was recorded: Cr and V—by 1.15–1.6 times; and Mo—by 2.2–2.8 times. With the help of the developed program (using computer vision methods), changes in their microrelief were detected to study photos of chips.

Keywords: computer vision; chipping; environmentally friendly lubricating cooling liquid; hydrogen-containing media; image processing; long-term operation; microstructure; rotor shaft; steel; tooling (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2023
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/16/23/7851/pdf (application/pdf)
https://www.mdpi.com/1996-1073/16/23/7851/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:16:y:2023:i:23:p:7851-:d:1291356

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().