Comparison of Pin Mill and Hammer Mill in the Fine Grinding of Sphagnum Moss

Ari Ämmälä ()
Additional contact information
Ari Ämmälä: Fiber and Particle Engineering Research Unit, Oulu University, 90014 Oulu, Finland

Energies, 2023, vol. 16, issue 5, 1-12

Abstract: Dried sphagnum moss was ground using a pin mill and a hammer mill under various operating conditions, i.e., changes in the rotor frequency and feed rate. The specific energy consumption of the size reduction was recorded. The ground powder was characterized by median particle size, width of size distribution (span), loose and tapped bulk densities, and the Hausner ratio. Pin milling used less energy for size reduction than hammer milling, especially when the target size was below 100 μm. In both milling methods, the specific energy consumption was mainly caused by the rotor frequency used. However, in pin milling, the specific energy consumption was also dependent on the production rate: the higher the rate, the higher the energy consumption. No such dependence was observed with the hammer mill. The span was wider in pin milling than hammer milling in the intermediate product size range although the difference decreased at the fine and coarse ends. A similar pattern was found for bulk densities. However, the flowability of powder, as characterized by the Hausner ratio, was comparable between the grinding methods.

Keywords: biomaterial; lignocellulose; peat; size reduction; pulverization; comminution; energy efficiency (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2023
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/16/5/2437/pdf (application/pdf)
https://www.mdpi.com/1996-1073/16/5/2437/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:16:y:2023:i:5:p:2437-:d:1087181

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().