Analysis of the Characteristics of Bio-Coal Briquettes from Agricultural and Coal Industry Waste

Alexandr Nikiforov, Akmaral Kinzhibekova (), Evgeniy Prikhodko, Amangeldy Karmanov and Sholpan Nurkina
Additional contact information
Alexandr Nikiforov: Department of Heat Power Engineering, Toraighyrov University, 64 Lomov Str., Pavlodar 140000, Kazakhstan
Akmaral Kinzhibekova: Department of Heat Power Engineering, Toraighyrov University, 64 Lomov Str., Pavlodar 140000, Kazakhstan
Evgeniy Prikhodko: Department of Heat Power Engineering, Toraighyrov University, 64 Lomov Str., Pavlodar 140000, Kazakhstan
Amangeldy Karmanov: Department of Heat Power Engineering, Toraighyrov University, 64 Lomov Str., Pavlodar 140000, Kazakhstan
Sholpan Nurkina: Department of Heat Power Engineering, Toraighyrov University, 64 Lomov Str., Pavlodar 140000, Kazakhstan

Energies, 2023, vol. 16, issue 8, 1-16

Abstract: One of the options for reducing harmful emissions in the production of heat energy is the use of biomass, including in combination with industrial waste (for instance, coal and coke dust). Recent studies demonstrate that a mix of biomass and coal makes it possible to obtain a bio-coal briquette with better characteristics, which is a motivating factor in the search for alternative sources of heat energy from local agricultural waste. The aim of this research is to study the properties of bio-coal briquettes from biomass (sunflower husks and leaves) and industrial waste (coal and coke dust). The raw material was grinded and used for the production of bio-coal briquettes of 20%, 30%, 40%, 50%, 60%, and 70% of biomass. The biomass was grinded to the size of no more than 2 mm for the fine fraction and no more than 6 mm for the coarse fraction. The briquettes were made mechanically using a hydraulic press with a compression pressure of 25 MPa without the use of any binder. The characteristics of the investigated bio-coal briquettes, such as density, strength, moisture content, ash content, volatile yield, calorific value, ignition time, burning duration, and burning rate, have good enough values. The fine fraction briquettes compared to the coarse fraction briquettes have a longer burning time (about threefold longer) and a lower burning rate. For all briquettes, an increase in the composition of coal dust results in a rise in the burning time, whereas the burning rate falls. The best in terms of strength, calorific value and combustion parameters are the following briquettes: 70% sunflower husk and 30% coal dust from the Karazhyra deposit; 60% sunflower husk and 40% coal dust from the Shubarkul deposit; briquettes from 70% sunflower husk and 30% coke dust; briquettes from 80% leaves and 20% coal dust from the Karazhyra deposit; and briquettes from 70% leaves and 30% coal dust from the Shubarkul deposit. The selected briquettes are suitable as an alternative source of fuel.

Keywords: bio-coal briquettes; sunflower husks; leaves; coal dust; coke dust; physical and combustion characteristics (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2023
References: View complete reference list from CitEc
Citations: View citations in EconPapers (2)

Downloads: (external link)
https://www.mdpi.com/1996-1073/16/8/3527/pdf (application/pdf)
https://www.mdpi.com/1996-1073/16/8/3527/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:16:y:2023:i:8:p:3527-:d:1126938

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().